Are you looking for the perfect picture settings for Sky Glass? This is the complete guide!
The perfect Sky Glass picture options are high resolution, specifically selected picture mode, and a balanced brightness/contrast.
Also, the colour and saturation must be between 25% – 50%, and the sharpness and backlight setting should be below 20%.
There is much more to explore, so let’s jump straight in!
What Are the Perfect Picture Settings for Sky Glass?
Note: To locate the picture settings on your Sky Glass, go to Settings > Picture & Sound!
1. Resolution Setting
The resolution setting on your Sky Glass TV is the most essential factor in measuring the visual quality of the television picture.
- The optimal resolution quality for Sky Glass TV is 3840×2160 (4K).
This is the maximum number of pixels that the Sky Glass TV supports and can visualise, so you wouldn’t be able to select any higher resolution.
Also, it’s essential to know that even when the UHD resolution is selected, you cannot benefit from viewing content that does not support 4K.
So, one of the best ways to keep your Sky Glass TV resolution perfect is to switch between UHD and Full HD, as per the content you’re viewing.
Info: The Sky Glass TV supports resolutions (576p, 720p, 1080i, 1080p and 2160p).
2. Perfect Picture Mode
The best Sky Glass picture settings definitely include the Picture Mode!
The picture mode is another significant factor to consider when setting up the Sky Glass TV picture settings.
The Picture Mode is a preset visual palette that enhances the picture of your Sky Glass TV by providing you with an option for different types of video content.
Here are the available picture modes on a Sky Glass TV:
- Auto – auto adjustment of the picture mode as per the viewed content.
- Sports – a picture mode specifically designed to capture fast movement.
- Movies – a cinema setting with a suspenseful palette for movie viewing.
- Music – a mode with fewer enchantments for the picture for music idling.
- Vivid – a colourful and abstract colour to the TV picture (recommended)
- Custom – the custom picture mode provides a custom TV picture setup.
We recommend going with the “Vivid” picture mode for a more immersive picture, but feel free to explore other options such as “Movies” or “Sports.”
Sometimes, you may find some picture modes performing better based on the lighting conditions in the room.
Note: You can switch the picture mode whenever you want!
3. Brightness & Contrast
The brightness and contrast are pretty similar but are two entirely different settings.
While the brightness controls how bright the entire picture would be, the contrast enhances the bright stops of the image even further.
So, the best setting for brightness and contrast is balance.
- Set the Brightness to 50%
- Set the Contrast to 100%
This is the best possible setting for long-lasting usage of your Sky Glass, but you can adjust the brightness anytime, as per your preference.
The only recommendation here is to prevent the TV from being too bright in darker environments to prevent eye strain.
Tip: If your room’s lightning is intense, increase the brightness to 75%.
4. Colour & Saturation
The colour and saturation settings on your Sky Glass TV control the level of intensity of the colour in the TV picture.
With too little saturation, the images’ colour will fade away, and with too much saturation, the images will become too vivid.
Sky Glass best picture settings for colour & saturation are 25% to 50%!
The exact percentage of the setting is up for the viewer to decide, so the best recommendation is not to keep the colour and saturation too low or too high.
Keeping balanced enhancements is the key and will contribute to the perfect overall picture settings for the Sky Glass TV.
5. Picture Sharpness
The sharpness setting on your Sky Glass defines how sharp the edges are in the TV’s picture and affects almost all objects.
However, very sharp doesn’t mean very clear, as over-increasing the sharpness will lead to jittery outlines and a lot of unnecessary hardware resource utilisation.
The best sharpness setting for Sky Glass is in the bottom 20%!
So, again, go below 20% and check which setting will match your preferences.
While adjusting the setting, observe the edges of the menu tabs, which will suggest which setting is the best.
6. Television Backlight
The backlight setting on a Sky Glass TV controls the overall brightness of the display and can greatly improve the viewing experience when set correctly.
For instance, when the TV is in a darker room/environment, a lower backlight provides better contrast and a higher picture quality.
- A lower backlight setting on a Sky Glass TV is better!
So, based on the Sky Glass TV room lighting, adjust the backlight between 25% – 50% as per your preference.
Also, don’t forget that you can always reach into the setting and tweak the backlight, as per the occasion, content, and environmental lighting.
7. Motion & Refresh Rate
The refresh rate on a Sky Glass TV is how fast your TV can re-draw the shown picture or frame.
The motion rate is measured by combining the actual refresh rate twice, and both are measured in Hz.
On a Sky Glass TV, the highest refresh rate you can select is 60Hz, which is enough for the movement on the screen to be smooth.
8. Noise Reduction
The noise reduction feature on a Sky Glass TV is one of the best options, especially if you’re viewing content with a low resolution.
This setting clears the noise of a low-quality picture to enhance the viewing experience even further.
- You won’t see any film grain and pixelation when noise reduction is enabled.
So, the noise reduction feature on the Sky Glass TV should always be enabled, so even the worst quality content will appear crisp.
Sky Glass TV Advanced Picture Settings!
So, if you’ve discovered the advanced Sky Glass picture settings on your TV but have no idea what they are used for, we’ve got you covered.
These settings are separate from the other tab because they are handy in specific scenarios, such as when you have a console connected.
Here are the sound options on a Sky Glass TV and the best way to configure them:
Local Dimming
Local dimming is a feature capable of disabling an individual or a group of pixels on the screen to make the black darker and the white much birther.
We recommend enabling this setting and checking whether it suits your occasion.
High Dynamic Range
The high-dynamic range or HDR is the variation of light levels throughout the picture on the screen and enhances the luminosity.
However, the HDR feature is content-dependent, so you may benefit from HDR only if the TV show, movie, game, or connected device also supports it.
Tip: You can leave the HDR enabled, and the feature will enable automatically when a supported movie, show, or input is visualised.
Dolby Vision
The Dolby Vision is an all-in-one pack that enhances the depth, contrast, and colours of your Sky Glass TV.
We recommend enabling this setting and diving into an immersive actual colour of your favourite TV shows, movies, and games.
Tip: When you’re ready to set up all picture settings, restart your Sky Glass TV.
Sky Glass the Best Sound Settings!
Now that we know the Sky Glass picture settings, let’s explore the available audio settings!
The sound settings of your Sky Glass TV are just as important as the picture settings and will further contribute to your viewing experience.
Let’s explore the sound options on Sky Glass:
Auto Volume Correction
The volume auto-correction is a fantastic feature to save you from loud adverts or sounds within your content.
This setting will even out the audio without loud noises that might wake somebody at night, so we recommend enabling the volume correction.
Virtual Surround Sound
This option enhances the surround sound when watching TV, so we strongly recommend enabling the virtual surround sound.
With this option enabled, you’ll enjoy more immersive and richer sound output from the Sky Glass TV.
Tip: Feel free to experiment with the other sound options, such as Night Mode, Speech Quality, and Bass Boost, to improve your viewing experience.
Quick Recap:
Hence, the perfect picture settings for Sky Glass must be balanced. They involve a high UHD (4K) resolution, medium backlight/brightness, and low sharpness.
The colour and saturation mustn’t be too high, and the perfect picture mode is up for the user to select.
Follow us for more Sky Glass guides, tips, and tricks!
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.