How to Reset Frontier Router in Easy Steps

How to reset Frontier Router is on my mind? This may be either you are unable to use the Internet or is too slow.

Resetting a router is always the best option when it comes to general Internet connectivity issues.

This is by far the most recommended method often referred by Industry experts to fix issues in general.

If you are not sure how to reset or restart your Frontier router, this guide is for you. Here you will learn the steps to do this without any error.

So, without any delay, let us learn the steps.

Frontier Router Reset

A router is an integral part of a broadband connection. If anything goes wrong with the device, you may experience connectivity issues.

Most of the cases, users tend to reset the device when they face issues ranging from no internet to slow speeds.

Let us learn the conditions when you may need to press the “reset’ button of your router.

1. Not Connecting to the Internet

Many times, your WiFi lights may be there, but your device may not receive WiFi signals.

This internet not connecting issue is common among users of the Company. There can be many reasons for this right from wrong connection settings, a faulty device to Internet Outage.

First, check with your neighbour to check if any outage is there in your area. But if you everything is fine except your connection, then you may consider resetting your device it to factory settings.

This will restore the factory defaults and you can now manually set it up and restart your connection.

2. Slow Speed

If you are getting slow speeds regularly, then you consider rebooting your router before you call the technician.

The company also advises its users to reset it’s router if you are not getting the required speed.

This is by far the best troubleshooter you can perform before going for the advanced troubleshooting by the technician.

3. For Better Performance

As per Frontier, it is a good idea to reset your device once a month to utilize its full potential and power.

Even if you are not facing any issue, you can do the rebooting once a while to keep your WiFi stable and fast.

Before you Proceed Resetting

Before proceeding to do the resetting, you must keep in mind a few things. They are as follows:

# Erasing of Settings

A factory reset will erase all your previous settings including the username and passwords.

Hence, it is always a good idea, to note down the current settings in a diary and then proceed to reset the device.

This way you can immediately do the settings without any need for further reading or googling.

# Check Outage

Before you proceed resetting your device, check if there is a major service outage in your area.

You can proceed to the Frontier website and check if your area falls in the outage list. If so, wait till the issue is fixed by Company before doing any troubleshooting.

How to Reset Frontier Router 

There are two methods to do the resetting procedure. One is doing a general restart while the other is to go for factory defaults methods.

Let us learn this in detail and how you can do it within minutes.

Method 1: Restart Method

The best way to fix your connectivity issue is to restart or reboot your Modem or Router. This is best if you just want to reboot your device without hampering its configurations.

The process to do this is as follows:

• Unplug the device power cord from mains
• Wait for 2 minutes
• Plug the power cord and switch on the power
• Let the device start
• Check your connection now

Quick Note

Please note that you must wait for 1-2 minutes before plugging again. Do not hurry in this step.

Method 2: Factory Reset Method

 If the restarting method did not work, you can proceed resetting the router. Resetting it will restore the device to its original factory settings

To do this, follow the steps below:

• Check if the power is “on”.
• Find out the “reset button” on the back of your router.
• Press the reset button for min 15 seconds.

Source: Frontier

• Release the reset button after 15 seconds.
• Wait for the router to restart at its own
• When done, the power light will turn on.
• Now do the settings and you are good to go!

Quick Note 

You can use a pencil or a paper clip to press the “reset button”. But do not use any sharp object as it may damage the button forever.

Doing the Configurations

Now since you have restored the device back to its original settings, you will need the Frontier internet settings. You will need the username, password, SSID, etc.

You can also use the copied settings that we mentioned above to set up your router once again.

If you need help with username and Passwords, refer this guide on Frontier Router Default Username and Password

Is Rebooting Same as Resetting?

No, not at all. Both are different and do different things. When you do a reset, it erases all your configurations and restores the default factory settings.

While rebooting means restarting your device. This helps fix normal issues, but the settings remain intact.

You should first try rebooting the device before doing the resetting process.

Conclusion 

Many users are often confused if Frontier Internet is good for gaming or streaming needs due to its outages.

Frontier internet is a good option you may think home broadband. And all providers face outage issues with Frontier, no exception.

If your WiFi speed is not that great or connectivity is not up to the mark, you may consider doing Frontier router reset or restart.

We hope you have the information now on how to reset Frontier router easily. In case the issue is still not resolved, you can contact the support staff at 1800 239 443 for help.