Wondering why is my Fios router blinking blue? Well, the Verizon Fios router blinks in blue when the device is in WPS pairing mode and it’s currently trying to connect.
The reason why the light is persistent and the router can’t establish a connection is the topic of this guide!
To solve the blinking blue light on a Verizon Fios router begin by restarting both parties involved in the WPS setup.
In case that doesn’t help, check for a Verizon service outage and update the Fios router to the latest possible firmware version.
There is much more to learn about blue light so let’s keep unwrapping!
Fios Router Blue Light Blinking – LED Indications!
To understand the blinking blue light, let’s learn a bit more about the Fios router LED indications:
The reason, why the Fios router is blinking in blue light, is that the WPS pairing to another device had failed.
However, the light should stay for 2 minutes and then automatically become solid, which is normal behavior. Then it becomes solid white to indicate a normal operation.
If the light continues to blink (indefinitely), it’s highly likely that your Fios router will face a different type of issue. This is why the best next step would be to start excluding possibilities!
How To Fix When Fios WiFi Router Blinking Blue?
Tip: Follow the steps in consecutive order!
1. Check for Service Outages!
The blinking blue light on a Fios router means that the router is currently attempting to establish a connection, hence something external might be wrong.
In that set of thoughts, the best first step would be to check for any ongoing Verizon server outages.
Unfortunately, you can only view Verizon California Outage Map for live updates and check for issues per zip code and city.
If you’re not located there, the best place to learn more would be at Verizon – Experiencing an Outage?
2. Soft-Reset the Fios Router
In case the blue light is persistent even though there is no reported outage, then the Fios router could undergo a system-related issue.
The best possible way to overcome such a hurdle is to simply perform a power circulation by unplugging the device from the power.
In case you’re unfamiliar with the power cycle, follow the steps below:
- Turn off the Fios router using the power button.
- Unplug the power adapter from the electrical source.
- Disconnect the power cable from the Fios router port.
- Wait for about 60 seconds for a power circulation.
- Connect the Fios router directly to a wall outlet.
- Reconnect the power cable to the router port.
- Turn on the Fios router and check the LED light.
Info: The Fios router takes about 40 seconds after being turned on to start all services and the status light to become solid white.
3. Close the WPS Proximity!
One of the primary reasons why the WSP pairing fails, and the Fios router is continuously blinking in blue is the distance between the devices.
To clarify, the WPS-enabled device and the Fios router have to be closer to one another in order for the WPS pairing to carry through.
In case the blue light continues to blink when the devices are closer, it’s important to restart the Fios router and re-attempt the WPS pairing again.
If the devices pair, great, but if the blue light is still there blinking, perhaps something else is causing the issue so proceed further.
Tip: Test the WPS pairing by standing next to the Fios router!
4. Update your Fios Router
One of the main reasons why is my Fios router blinking blue is due to running an outdated software version, which leads to a faulty device operation.
It’s super easy and fast to update a Verizon Fios router so let’s learn how it’s done in easy steps:
- Connect a device to the router’s WiFi or via Ethernet.
- Open a web browser and insert “http://my.router/”.
- Use the password on the router’s bottom sticker to sign in.
- From the next screen click on Check for Software Update.
- Then your router will scan and hopefully carry out an update.
Note: After the Fios router updates, the device will restart and it would take about 2 minutes for all services to become online.
When ready, test whether the WPS pairing would go through.
5. Check for Electronic Interference!
It’s likely that something is interfering with your Fios router’s WPS signal and preventing the device’s communication.
However, there are well-known factors of interference involving objects that when in close proximity to the router, impact the wireless signals.
Some of the interference on your Fios router could be caused by:
- Microwaves and baby monitors/phones
- Nearby wireless (WiFi) or Bluetooth devices
- Signal block due to covered or obstructed router
In case you’re unable to identify any sources of interference, proceed with the next step!
6. Hard-Reset WPS-Enabled Device
The next step is to perform a hard reset, also known as a power cycle on the WPS-enabled device, since we have to exclude this possibility as well.
As we’ve clarified the blinking blue light appears because the WPS pairing has failed, which can also be the WPS device’s fault.
- Simply turn OFF and ON the WPS-enabled device to refresh the system!
Then try to pair the Fios router to the WPS-enabled device again and in case the blue light is still there and blinking, proceed with the next step!
7. Factory Reset Fios Router!
Factory restoration is one of the harshest methods when it comes to clearing Fios router LED indications such as the stuck blinking blue light.
This method will completely re-install the operating system of the Fios router but will also permanently erase ALL saved configurations!
Alert: The WiFi, router Proxy, WiFi channel, and all other settings will be erased.
Here’s how to perform a factory reset on a Fios router in easy steps:
- Acquire a thin and sharp object such as a needle or toothpick.
- Locate the reset button pinhole on the back of the Fios router.
- Reach inside the hole and continuously press the Reset button.
- Hold and release the reset button when all LED light indicators go out.
- Wait for about 3 minutes until the Fios router resets and restart.
- Try to pair the WPS-enabled device to the Fios network router.
Info: When the factory restoration is completed the Fios router has to be set up (if there is no automation script).
In case you’re encountering setup issues, contact Fios by following the link provided later in the guide.
8. Test your Fios Internet
In case there are no Verizon outages, it’s time to test whether your internet is intact to determine further whether the issue is external.
Simply take your smartphone and try to connect to the Fios router’s WiFi and surf the web.
In case you’re not able to, it’s highly likely that you don’t have an internet connection or there is any lifted suspension on your Verizon services. This is why read further, to learn the next step…
Need More Help?
In case the solutions in this guide were not able to help, contact Verizon Customer Service for deeper troubleshooting of the issue.
In addition, don’t forget to share what you’ve already tried here to save as much time as possible. Good luck.
Quick Recap:
Now that we know why is my Fios router blinking blue, we know that the issue can either be on the router or on the WPS-enabled device’s side.
This is why we need to power cycle both instances, update the Fios router and eventually perform a factory restoration.
Read Next: Verizon Fios App Not Working? – Here’s How to Fix
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.