Are you wondering what the Linksys Velop purple light means? Well, continue reading to find out!
- In most cases, the Velop displays a purple light when initially setting up your Linksys system and all nodes.
This is a promising sign to indicate that the Velop node is ready to be configured and join your Linksys network.
However, when the purple light is causing trouble, you must perform an inspection to discover the culprit.
To fix the purple light on your Linksys Velop, turn on the Bluetooth on your phone, open the Linksys mobile app, and tap on the “Setup” button.
If the purplish light is persistent and causing you trouble, keep reading!
Linksys Velop Node Purple Light – What Does it Mean?
When you are initially setting up your Linksys Velop mesh Wi-Fi system, the nodes go through a different series of color-coded LED lights to signify their status.
If you are getting the purple LED light on your Velop node, this indicates that the device is ready to set up or setup is in process.
Once you complete the Velop initial setup process via the Linksys mobile app, the purple light on your Velop node will automatically change to a solid blue light.
This will signify that the node is now online on your mesh Wi-Fi network.
However, sometimes, the purple light won’t go away, which means the setup has failed.
Let’s learn how to fix this!
How to Set Up Velop Correctly?
If you have no idea how to set up your Velop node to solve the purple LED light, then there is no need to worry.
We’ve prepared a short and quick step-by-step tutorial to help you configure and correctly establish the connection, which should turn the purple light to a solid blue in no time!
- Open the Linksys mobile app and press the “Setup” button.
- Turn on the “Bluetooth” on your phone and accept the TOS.
- The app will look for the node, and once found, press “Next.”
- Next, enter your “Email” and “Password” to set up a Cloud ID.
- Then, change the Linksys WiFi network “SSID” and “Password.”
- Connect your mobile phone to your new Velop WiFi network.
- The purple light will start blinking while the Linksys Velop is set up.
- Once the node setup is complete, the purple will turn solid blue.
This is the correct way to set up a Velop node wirelessly, and the purple light should turn to solid blue in a matter of minutes.
However, in some cases, this never happens, so we got you covered.
If the purple light is still there, continue reading the solution guide!
Important: Ensure your phone has a good internet connection and the Linksys app installed.
Linksys Velop Purple Light – Fix Easily in Minutes!
If you’ve recently added your Velop node to your mesh Wi-Fi network, but the solid purple light is constantly there on the node, there could be something wrong with the Velop itself.
Thus, the problem could be related to anything, whether it is related to the software, so let’s troubleshoot!
1. Wait for Setup Completion
If you have just added your Velop node to your network and it is blinking purple, don’t worry and patiently wait for some time for the initial setup to complete.
Sometimes, the initialization may take a few minutes, depending on your network speed and the number of nodes you’re adding.
In addition, it’s normal for the node to display a solid purple light, especially when the Velop node firmware update process is ongoing.
- So, avoid interrupting the setup process by unplugging the node and patiently waiting 10 to 15 minutes for the devices to do their work.
Note: If the purple light remains there for over 15 minutes, continue with the next solution!
2. Check the Power Connection
Remember that all the Linksys Nodes require a constant power source to work correctly and connect with each node.
Thus, check and ensure that both the power cable on the Velop node and the power adapter on the wall outlet are securely plugged in.
Moreover, ensure that the power LED light on the Velop is lit up to confirm the power supply is intact.
Alternatively, try plugging your Velop node into a different power outlet and check if the purple light issue disappears again after waiting about 15 minutes.
Necessary: Inspect the Linksys Velop’s power equipment for any visual faults!
3. Power Cycle Your Linksys Velop
There is a good chance that the Velop setup process will become stuck or unresponsive due to a software bug or glitch, and that’s why it constantly displays a solid purple light.
In that case, you should reboot the Velop node, which may help clear all the temporary and minor glitches.
Here’s how to power cycle your Linksys Velop in easy steps:
- Disconnect the power adapter from the outlet.
- Unplug the power cable from the Velop node.
- Wait for about 15 seconds for the power cycle.
- Lastly, plug the power cable and adapter back.
This will give a fresh restart to the node, and the solid purple light will switch to a solid blue light once the reboot is complete.
After that, you can start using the Linksys WiFi on your devices.
4. Relocate Your Velop Node
The Velop node may have trouble connecting to the Linksys network due to signal interference or weak Wi-Fi signal strength.
Considering this, you must try to move the Velop node closer to the modem and other nodes, which will optimize the connection, hopefully fixing the purple light.
Doing this will help resolve network-related issues and may allow the Velop node to establish a connection with your network correctly.
In addition, you must verify that there are no physical or electrical obstructions between the nodes, as they can cause signal interruption or entire loss.
List of Common Interfering Objects!
Try to avoid placing these objects near your Linksys nodes to minimize the chances of signal loss.
When you’re confident that there is no interference, re-attempt the setup process, and the purple light should turn to solid blue when the connection is successful.
Tip: Avoid turning on any interfering devices until the end of the guide!
5. Factory Reset Your Velop
If you have tried all the steps, but Linksys Velop solid purple light is still there, you must perform a factory reset on the node.
This is an excellent solution to potentially eliminate the chances of system glitches/bugs within the Velop device and provide you with a fresh setup attempt.
Here is how you can factory reset the Velop:
- First, locate the Reset button on the Velop node.
- Press and hold the button for about 10 seconds.
- Release the button when the LED light changes.
Once the factory reset is done, the Velop node will revert to its default settings.
After that, you must go through the same setup process to configure the Velop to the Linksys network and start using your nodes.
6. Use a Wired Connection
In case the wireless setup keeps failing, keep in mind that you can connect your Linksys Velop node by using an Ethernet cable.
The setup works by connecting your Parent Node with the network router and then connecting your Child Nodes to the main node again via an Ethernet.
- The Ethernet cable connects to one of the Ethernet ports on your Linksys router and one of the ports on your Parent Node.
Then, the same applies to the child nodes and your parent unit.
So, you only need a long enough Ethernet cable to connect your parent node with the Linksys router and then another Ethernet cable for each of your child nodes.
This method will bypass all the wireless limitations, such as interference, and provide a direct connection supply to the node.
Tip: To continue troubleshooting, we recommend contacting Linksys Support for more help!
Quick Recap:
Hence, when the Linksys Velop purple light doesn’t go away, the setup process has failed, thus, you must check the A/C supply, relocate the node, and power cycle the unit.
Also, check for physical or wireless interference before performing the factory reset.
Follow us for more!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites. Check out more about him here.