How to Reset Cobra MicroTalk Walkie Talkies?

Kevin Wood Updated on
how to reset cobra microtalk walkie talkies

Do you want to know how to Reset Cobra MicroTalk walkie talkies? We have the various methods you’re looking for.

Walkie-talkies are surely a go-to device for people looking for instant communication.

If you rely on it a lot, it can be a pain when it’s not working properly. We’ve found different ways how you can reset them.

Let’s find out how you can do it!

One proven solution to fix the not working issues of Cobra MicroTalk is to reset your walkie talkies to their default settings. Simply press the Power/Mode and Talk buttons simultaneously. Then, press the Power/Mode button again to turn on the device.

Before we move on to the actual steps of the process, let us discuss why you need to perform a reset on your Cobra MicroTalk walkie talkies.

Why You Need Cobra MicroTalk Walkie Talkies Reset

Before anything else, it is important that you know why you should restore your Cobra MicroTalk walkie talkies to their factory default settings.

Hopefully, it will return your device to its original state and fix the following issues.

1. Fixing Bugs and Glitches

Like in other devices, a simple reset of your Cobra MicroTalk can fix bugs and glitches. Corrupted data will be wiped out for good.

2. Difficulty Communicating

You may have set the wrong power output for your walkie talkie, causing communication problems.

3. Displaying Wrong Information

The device may be displaying symbols on the screen that you can’t determine.

4. Not functioning Properly

Your Cobra MicroTalk walkie talkie doesn’t have access to its other features like scanning and push-to-talk.

Whatever the problem, it can be difficult to pinpoint its root cause. In this case, a simple reset to factory defaults is worth doing.

How to Reset Cobra MicroTalk Walkie Talkies

reset cobra microtalk walkie talkies

Now that you know the reasons you need a reset let us discuss how to reset Cobra MicroTalk walkie-talkies in detail.

But, first, try rebooting your Cobra MicroTalk walkie-talkie. It’s the best option to solve minor troubleshooting problems since it won’t damage your device.

Turn off your device. Then, turn it back on by pressing and holding the power button for 2 seconds. You will hear an audible tone indicating the radio is on.

If restarting your device doesn’t work, restore it to its original settings.

Below, you will find different methods to reset your MicroTalk walkie-talkies.

Method #1: Take the Batteries Out for 5 Minutes

Cobra Walkie-Talkies are incredibly straightforward devices. There’s not a lot into them since their only purpose is to allow you to communicate with someone with the other pair of your device.

Since it’s quite a simple device, Cobra didn’t feel like there was a need to put a Reset button on it.

There’s nothing wrong with it, as there are only a few scenarios where a full reset will be required from your walkie talkie.

However, it can happen, and if it does, you’re left scrambling, not knowing how to reset it properly.

take batteries out

There are different ways that you can do it, and here’s one of them:

  1. Look for the battery compartment on the backside of your walkie talkie.
  2. Open the compartment and take the batteries out.
  3. Wait for 5 minutes with the batteries disconnected.
  4. Return the batteries back inside the compartment.
  5. Switch on your Cobra walkie talkie.
Note: Make sure that your batteries still have some power left in them, or your device won’t switch on properly.

Method #2: Press and Hold the Power Button While Turning it Off

If pulling out the batteries does not work, there’s also another way that you can reset your Cobra walkie talkie.

Pressing and holding the power button while your device is switching off is one way to do it.

Generally, you’re going to need to hold down the power button to turn your Cobra walkie talkie on or off. However, it does only take a couple of seconds, and you’ll see it turning on or off.

This method will require you to press it for at least 30 seconds to let the device know that you’re not performing a routine power on or off.

Here’s how to do this method properly:

  1. Get your Cobra walkie talkie and find the power button.
  2. Make sure it’s turned on.
  3. Press and hold the power button for 30 seconds.
  4. If your walkie talkie shuts down, continue holding the power button.
  5. After releasing the power button. Switch it on like normal.
Note: You can also press and hold the power button for 30 seconds to turn it on.

Method #3: Press the Power and Talk Button Simultaneously

press power and talk

With the lack of a Reset button, if something happens to your Cobra walkie talkie, there’s no definitive way to restore it.

It’s not all bad since you also have a lot of choices when it comes to how to actually reset it.

There are a lot of ways to get your walkie talkie to reset to its factory settings.

A few of them require you to push the power and another button simultaneously. In this case, it’s the talk button.

Here’s how to use this method to reset your Cobra walkie talkie:

  1. Turn on your walkie talkie.
  2. Locate the talk button, it’s usually on the side of your radio.
  3. Press the Power button while simultaneously pressing the Talk button.
  4. Hold it for at least 10 seconds.
  5. Wait for your walkie talkie to shut down.
Note: After completing the process, you can now turn on your radio and expect to hear a few beeps during the start-up.

Method #4: Press the Mode and WX Buttons While Turning On

Different walkie talkie radio models come with different types of buttons and procedures.

Depending on what you have, you’re going to follow a different step to reset your Cobra radio. The first thing you’re going to do is look at your radio and check what buttons it comes with.

If it has the WX button, a reset procedure involves it. Here’s what you should do to restart your radio:

  1. Turn off your Cobra walkie talkie.
  2. Press and hold the Mode or Power and the WX buttons.
  3. Continue holding it until the display turns on.
  4. Check your radio to make sure the channels are reset.
Tip: This reset procedure works for most radios with the WX button, especially the MR HH90, MR HH100, and MR HH200.

Method #5: Press the Tri-Watch and HML Buttons

Some of the newer models of Cobra walkie talkies come with a lot of features. This means that there are also multiple buttons on the radio that you can press.

Of course, these buttons do have their own functions, but some are also used to reset your walkie-talkie.

Check your radio’s set of buttons and see if it has Tri-Watch and H-M-L buttons. If these buttons are present, you can try this method to reset your walkie-talkie:

press hml button
  1. Press the HML and Tri-Watch button on your walkie-talkie.
  2. Hold the two buttons while you power on your device.
  3. Continue holding on to the buttons.
  4. Wait until the display test flashes on the LCD screen.
Note: HML also stands for High, Medium, and Low. So, if your radio has the Hi-Lo button, this process also works.

Method #6: Press the Power and Code Buttons Together

You usually resort to resetting your radio if something is not working right. If your radio’s screen is not displaying information correctly, you will want to reset your radio.

There are also times when you can’t receive transmissions from the other device, you’ll also want to perform a reset.

However, if everything is working fine, but you simply want to reset your saved channels, there’s a way to do that. You can reset your radio back to using the factory default codes.

If this is your concern, this is the way to do it:

  1. Find the FUNC or CODE button on your walkie talkie.
  2. Press and hold it while turning on your radio.
  3. Release the button when you hear 4 beeps.
  4. Your screen will also display “Code Memory OFF.”
Note: Make sure to turn off your radio before doing these steps.

Since your Cobra MicroTalk walkie talkies don’t have a reset button, these are the different ways to do it. There are a lot of different methods giving you a choice on how you want to do it.

You’re going to reset your radio since you’re experiencing an issue. You can contact Cobra customer support for assistance if you run into any more problems.

Read Next: Cobra microTALK Walkie Talkies Not Charging?

Bottom Line

Now that you know how to reset Cobra MicroTalk walkie talkies, you’ll be able to use them effectively. They’re valuable tools, especially if you need instantaneous communication.