Your Cobra microTALK walkie talkies not charging? We have the solution!
As the charging equipment or the device itself ages, issues with the electricity translocation could occur.
One of the reasons that your Cobra walkie will not charge is due to defective charging equipment or a charging source.
Let’s learn more about this problem!
To fix when Cobra microTALK walkie-talkies aren’t charging, power cycle the equipment and replace defective components. Next, replace the walkie-talkie’s battery and if nothing worked, perform a factory reset on the device for a fresh start.
Let’s next learn more about the issues that could occur with the Cobra walkie-talkie!
Before we go on with any of the solutions for this problem, let’s first make sure that you are charging the Cobra microTALK walkie the correct way.
There’s a simple setup of things and how your charger should connect to receive walkie-talkie charging.
- Connect the Power Adapter to a Power Source
- Plug the USB cable into the adapter
- Connect the cable to your Cobra microTALK Walkie-Talkie
Here’s how to identify if your Cobra microTALK walkie-talkie is charging or not!
Users need to take a look at the charger’s LED indicator.
On the original cobra microTALK walkie-talkies, there is a LED light that displays the current status of the device. If the LED is ON, it means that the device is charging.
If it is OFF, then the walkie-talkie has finished charging and you should unplug it from the power equipment.
In case the device won’t charge even after the instructions, let’s learn how to fix the issue!
After getting you familiar with the root causes of this problem, let’s proceed with the troubleshooting now.
For best efficiency, follow the order of our solutions and do not skip any recommendations and tips. In addition, test your walkie-talkies’ after each fix attempt.
Let’s jump right into the first solution!
The first thing you should do is perform a power cycle on the equipment.
This will discharge the charger of your Cobra walkie-talkies and make sure that the equipment is not defective whenever you plug in your device.
This method is also called a Power Reset.
Here’s how to power cycle your walkie-talkie’s charging equipment:
- Disconnect the charger from the power source.
- Unplug the USB cable from the adapter.
- Wait for 5 Minutes.
- Only plug the adapter into the power source.
- Connect the USB cable to the already-plugged-in adapter.
Once you have the USB cable connected to the power adapter, secure your walkie-talkie’s port into the cable and test the charging. If that didn’t work, move on to the next step!
Note: In addition, ensure that the USB cable goes all the way into the power adapter!
Chances are that there has been a problem with the power source you’re attempting to charge on.
This could greatly incapacitate the charging equipment, especially if the power source is not withdrawing or ejecting enough power.
The source could also have stopped completely working!
- Test the adapter by plugging your device into a different power source!
To make sure that the new power source for your walkie-talkies’ charging equipment is functional, attempt to charge another device.
If the charging undergoes successfully, then you will know that this power source can charge your Cobra devices. You can now test.
Note: The blinking LED on the walkie-talkie’s charger means that the power is inconstant.
If the issue wasn’t with the power source either, then it has to be the USB cable you’re using with your charging equipment.
Especially if you are not using the original USB cable to charge your walkie-talkies, it could go faulty really fast, resulting in charging problems.
The best recommendation would be:
- Buy a brand new USB cable at an approachable price to test with!
You can also test with a USB cable that you’ve got, from another device, or simply one that’s lying around.
However, without a new USB cable, we can justify the functionality!
Alert: Using an old or secondhand USB cable could quickly deprive the walkie’s battery.
In the case of Cobra microTALK walkie talkies not charging even after all previous solutions, we need to inspect your setup’s charging adapter and identify any potential issues.
The problem could be with the power adapter, rather than the USB cable in your charging setup.
That’s why your next step is to use an alternative power adapter for your equipment and then test to charge the Cobra microTALK walkie-talkies.
You could either order or buy a first-hand power adapter from any nearby technical store.
It doesn’t really matter whether it is Cobra’s or not, but the quality does apply only to the USB cable.
Once you have the new power adapter, install it in your setup and test the charging.
Note: If the charging LED blinks constantly or isn’t lit up, there’s a fault with the adapter!
Our most powerful method so far is to perform a Factory Reset on the walkie-talkie. If it is a software fault, then the reset is definitely your way to go.
The advantages of performing a software refresh are great since all of your walkie-talkie’s info and data will be reset freshly.
Here are the steps and instructions for performing a factory reset on your walkie:
- Connect the power adapter along with the USB cable to a power source.
- Plug the walkie-talkie into the USB cable’s other end.
- Now, find the Power Button on the walkie-talkie panels.
- Find the Talk button on the device as well.
- Press and hold the Power and the Talk buttons at the same time.
- Keep pressing the power and the talk buttons for around 30 seconds.
- After that, give the Power Button another hold for 15 seconds.
- Lastly, be patient until your walkie-talkie starts up.
Keep in mind that for this process to work, pressing the power and talk buttons must shut down your walkie-talkie first.
Then, by holding the power button again, the device shall start up, indicating a successful reset proceed. Be patient and allow the device to reset.
Tip: The factory reset also helps with other bugs such as channels or features issues!
If you want to avoid purchasing a brand new charger, then there are a couple of things you could try on the current one.
Generally, charger malfunctions are caused by rips on the cable, which could be both on the port and USB ends of the device.
Here’s what you could attempt to fix your microTALK charger:
- Clean the Input/Output ports out of any obstructions!
- Push the USB end’s cable all the way in
- Straighten the electric poles of the adapter
Since Cobra microTALK walkie-talkies use universal chargers, you will be able to purchase a new one from each technical store near you.
However, we recommend getting an Original Cobra microTALK Charger from Amazon at an approachable price.
More about this later!
Let’s next review what we’ve learned in this guide, shall we?
Hence, to fix the Cobra walkie-talkie charging problem we need to reboot the device and power refresh the charging equipment. Next, replace the USB cable along with the power adapter to test, and finally, perform a reset on the walkie-talkie!
Read Next: Why Cobra microTALK Won’t Turn On?
In this guide, we’ve learned all about the Cobra microTALK walkie talkies not charging issue, what it represents and what are the best ways to solve it.
After all, if you were using your walkie-talkies for a long time now, perhaps their end-life has come! Good Luck!
If you’re looking for a new cobra microTALK charger, we strongly recommend a product that’s guaranteed to be supported.
Find the UpBright Cobra microTALK Charger on Amazon and order yours today! This is the safest way to solve the problem!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.