Perhaps you’re trying to find the correct process of how to program DIRECTV remote to Sony TV and you can’t locate the best one. You’re lucky, because, today, we’ll be going over the complete steps of doing it!
This tutorial will be unlike other guides you’ll see online.
In this guide, we will be detailing everything from checking the status of the remote, down to finalizing the programming process of your Sony TV!
If you’re trying to find the process of programming your DIRECTV remote to your Sony TV, first ensure that the DIRECTV remote is loaded with working batteries. Then, perform the necessary steps to program your controller to the television you’re using!
Before we get to that, though, it’s important to understand the correlation of doing this process; like understanding the relevance of doing it, what benefits you can get, and so on.
Whether you’re using a universal DIRECTV remote or a DIRECTV Genie remote, programming it to your TV will actually be helpful in controlling the audio/volume, the channels, changing of the source or input, and others.
Basically, the control factor is what you’re looking for in programming your remote to your TV.
If that’s the case, what is the process of how to program my DIRECTV remote to my Sony TV? Can I do it even if I don’t have the exact TV code of my television?
In this guide, we will be going over a couple of steps you can follow to program or pair your DIRECTV remote to your Sony TV!
The first and probably the most important step is to check if the DIRECTV remote you have is equipped with working batteries.
Without batteries, the DIRECTV remote wouldn’t be operable, it wouldn’t work, and therefore, you wouldn’t be able to program it.
So, double-check the batteries you’ve inserted into the DIRECTV remote and see if they’re still functioning.
Even if the signals and the actions on the remote are dictated by infrared frequencies, it’ll be better to work on the process by going near the television.
This eliminates the possibility of distance hindering the process from being successful.
Therefore, when working on this, it’ll be better to come near the television so that you wouldn’t worry about extending the remote arms-length!
Once all of those preliminary processes are done, the next step you have to do is to slide the switch on the remote to “TV.”
Now, depending on the DIRECTV remote you have, you’ll either need to slide it to the left or to the right. You just need to know where the “TV” option is and move the slider in that particular direction.
Then, the next step is to initiate the programming or the pairing. To do this, you’ll have to press the buttons [MUTE] and [SELECT] on the TV to initiate this.
This would prompt a page or a screen where it’ll ask for the code to program the controller to the television. At the same time, the LED indicator on the remote would blink two (2) times.
For this, you’d have to enter the code to continue the programming or the pairing process of the DIRECTV remote to the Sony TV.
Each television would have a different code. But, among the most common would include:
You will know that the code is correct when the LED light indicator on the remote flashes.
Then, lastly, press the [CH +] or [CH -] button until you get or arrive at the correct code. Similar to step #5, the system will give you a hint that the code you’ve come across is correct – the TV will turn off by itself.
So, when it turns off, turn it back on using the DIRECTV remote to test if it’s able to control it.
After you do this, you should now have control of your Sony TV using your DIRECTV Genie or HD DVR remote! Check everything like the volumes, the channels, the input/source, and others!
By now, your DIRECTV remote will have control over the Sony TV!
If after you’ve done the process, you’re still unable to control your Sony TV, you can do further troubleshooting steps before bringing the problem up to DIRECTV’s customer support team.
The first thing troubleshooting step you can do further would be to power cycle all the components of the set.
This includes the remote control, the DVR or set-top box (STB), and the Sony TV!
To power cycle, the DVR and the TV, unplug them from power and wait for 15 to 30 seconds before plugging them back in again.
To power cycle the remote, however, you just need to take the batteries out for 30 seconds before putting it back in again.
Then, finally, what you want to do is to reset the remote. To do this, follow these steps:
- On your DIRECTV remote, press MUTE and SELECT at the same time.
- Press and hold it until you see the LED light flash three (3) times.
- After that, press 9-8-1 on the remote.
- You’ll know that it’s reset when the LED indicator flashes four (4) times.
If this is still not sufficient, then the next best thing to do is first contact DIRECTV’s customer support team.
Let them know about the trouble you’re experiencing. From there, they will determine where the problem is coming from.
When they deem that the TV causes the dilemma, they’ll refer you to Sony. Otherwise, they’ll perform further troubleshooting steps and they’ll check if you need a replacement or a repair of the remote.
To program your DIRECTV remote to your Sony TV, first make sure that your remote has batteries. Then, press mute and select at the same time, enter the code, and press channel up or channel down until the TV goes off.
If you’re not sure where you can find a high-quality guide on how to program DIRECTV remote to Sony TV, you don’t have to look elsewhere!
Armed with this guide, you can go back any time you find yourself stuck with this problem!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.