Wondering what the Community Fibre router red light means? This guide covers everything!
Well, the red light on your Community Fibre router indicates that there is an internet issue with your device that needs to be fixed as soon as possible but worry not.
We’ll unwrap everything in this guide to help you resolve the router’s red light and restore the Fibre internet connection.
If your Community Fibre router is having a red light, unplug your router from the socket for about 3 minutes. After that, plug the switch back in and wait for your router to display a solid turquoise light.
Let’s dig deeper to unwrap more details!
What Causes the Red Light on Community Fibre Router?
The primary reason for a red light on your router can be an internet disruption or any problem with the router itself.
However, you can quickly resolve this by simply restarting the WiFi router and inspecting the cable connection between your router and modem to ensure that they work.
Sometimes, the red light also appears due to temporary issues, so it is crucial to not rush and wait a little bit more.
- If the red light persists indefinitely, then it is crucial to know all underlying possible causes for correctly troubleshooting your router.
Here is a list of some more potential causes:
Fortunately, now that we have identified the causes, we can quickly address all of them!
How to Fix the Community Fibre Router Red Light?
Tip: Follow the steps in chronological order!
1. Wait a Little Longer!
The first thing you must do is be patient and wait a little longer!
Sometimes, your router encounters temporary issues and doesn’t connect to the internet service, which is why it unexpectedly starts displaying a red light on the router.
- However, such temporary issues persist for a short time and might automatically disappear in a few minutes.
Then, check if the router light changes to its standard colour.
This approach is straightforward yet effective, as the router usually takes some time to initialise or reconnect to the network.
Note: If the red light persists for over 5 minutes, you must troubleshoot!
2. Soft-Reset Your Fibre Router
Sometimes, temporary software or network glitches can also lead to a red light on the router.
In this case, simply restarting your router directly from the app works wonders, clearing out all temporary issues and refreshing the connection on all your devices.
Note: Verify that you have already installed and logged in to the Linksys app!
How to Restart the Community Fibre Router?
- Grab your phone with the Linksys app installed.
- Then, open the Linksys app on the smartphone.
- Next, tap on the “Menu” icon from the top section.
- Locate and tap on the “Network Administration.”
- In the Network menu, press on “Restart Router.”
- Choose the “Restart” button to start the process.
Your router automatically restarts and finishes rebooting after a few minutes.
Then, check to see if the status LED colour on your router is solid blue, if so, your home WiFi is now working fine.
Tip: Keeping your Fibre router unplugged for longer helps against overheating!
3. Check the Cable Connections!
When your Fibre WiFi router displays a red light, checking the cable connection is compulsory.
If you have recently relocated or reconnected your Linksys system, there may be something wrong with one of the cable connections.
- Simply inspect the cable connection of your entire WiFi setup!
You must check whether cables are plugged into the correct port on your router and modem.
If everything is correctly set up, look for the loose connections with the connector on the cable and router and make sure the cables are firmly plugged into the port.
Tip: Unplug and securely reconnect all cables.
4. Power Cycle the Fibre Router
Sometimes, when simply restarting the router doesn’t work, power cycling does.
This includes disconnecting your router from the power source for a few minutes to run a power circulation on an entire system.
This will refresh the router’s memory, services and all the networking tasks!
Follow these steps to power cycle your Fibre WiFi router:
- Turn off your Fibre router with the power button.
- Disconnect the power cable from the WiFi router.
- Power off the switch from the electrical socket.
- Wait for about 3 to 5 minutes for full discharge.
- Then, plug the power cable back into the port.
- Wait a few minutes for your internet to restore.
Whenever the power cycle is over, check for the red status light once your devices are booted up and running again.
If the red light is still coming on your router, move forward into the guide!
Note: If you have any secondary routers, power cycle them too!
5. Inspect Your Ethernet Link!
There is a good chance that the Ethernet cable on your router or modem is poorly connected, losing network signals and causing your router to display a red LED light.
Moreover, cables lose their functionality over time, so they need to be replaced.
Before replacing anything, let’s first thoroughly inspect the Ethernet cable!
Here is how you can test your router ethernet cable:
- First, unplug your router and modem from power.
- Disconnect the Ethernet cable from both devices.
- Inspect both ends of the cable for any breakage.
- Blow the Ethernet port on the router and modem.
- Remove any obstructions from the Ethernet port.
- Firmly reconnect one cable’s end to the Modem.
- Plug the other end to the router’s Ethernet port.
- Plug the router and modem back into the power.
Wait a few minutes and then check to see if your Community Fibre router is displaying a normal internet light or still displaying a red light.
If your router still has a red light, try using a different Ethernet cable to exclude the possibility of a faulty data transfer due to a defective Ethernet.
Tip: You can explore replacement Ethernet cables online at any time!
6. Check the Internet Service Status!
Have you contacted your ISP? If you haven’t contacted your ISP, do so because there is a good chance the internet problem is from their side.
They can diagnose and try resolving the problem from their end to get you the internet service back and running up again.
In case your ISP tells you that the internet system is under maintenance or may take some time, then there’s no need to do anything further to troubleshoot your system.
Hence, in case of an outage, simply wait until the internet service is restored from the servers.
Note: If there is no outage from the provider, the issue is with the Fibre Community Router!
7. Factory Reset Your Fibre Router
If you have tried every step, but the red light is still there, perform a factory reset on your router as a last resort.
This is an ideal solution when nothing works, but it will permanently delete all of your configurations, such as WiFi names, passwords, and other networking-related settings.
How to Factory Reset the Community Fibre Router?
- Make sure your router is plugged into the wall socket.
- Locate the Reset button pinhole on the router’s back.
- Acquire a thin and sharp object that can reach inside.
- Press and hold the “Reset” button on the Fibre router.
- Release when the LED turns from Red to Solid Blue.
Once you finish the above steps, your Fibre router will hopefully work fine, and you can connect your devices to the WiFi using the default credentials from the back of your router.
From there, you will be able to set up your new WiFi names and passwords as well as tweak other settings.
Need More Help?
In case you need more help, contact Community Fibre Support and report the red LED light, as well as explore further solutions.
We hope this guide was helpful for you, so best of luck!
Thus, when you see the Community fibre router red light, restart your router using the app, check the Ethernet connection link, and power cycle your entire Linksys system.
If nothing helps, use a different Ethernet cable, check for outages, and reset your router.
Follow us for more troubleshooting guides on Community Fibre routers!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.