If you notice your Boost Mobile activation not working, it’s usually solvable by performing a few easy and simple troubleshooting steps.
You’re lucky, because, in this guide, we’ll be going over the complete courses of action on what you need to do to successfully troubleshoot it!
If the activation of your Boost Mobile device fails to work, double-check if the device is unlocked. After that, ensure that you’re activating it in an area covered by Boost Mobile. Then, check the SIM card and examine for any type of damage.
In anticipation of the comprehensive resolution, you can perform, let us first unravel some of the customary reasons as to why it won’t activate.
It can definitely be a bummer to find out that your Boost Mobile device is not activating successfully.
And as easy as we want it to be, determining the reasons would be more than just checking for signal or reception.
As far as Boost Mobile users are concerned, the following are the top culprits on why a Boost Mobile device isn’t activating properly.
- The number isn’t ported into Boost Mobile yet
- No signal/coverage on the spot where you’re activating
- The device is not unlocked (locked into a different provider)
- Serial code or IMEI is incorrect
In case you’re part of the demographic asking why can’t I activate my Boost Mobile phone, we got the guide that you’ve always needed!
To compare this tutorial to others you’ll also find online, this guide won’t just be a generic step-by-step process of solving the concern. Instead, we will be covering the entire process one step at a time!
Here’s the complete and comprehensive guide in activating your Boost Mobile device whether you ported a number into the network or if it’s a new device.
The first thing you want to do is to check if the smartphone or tablet you’ll be using is unlocked. You can use an online tool to detect whether or not the device is unlocked or not.
Alternatively, you can try inserting a SIM card from a different carrier into the device and see if it will be used for calling and texting.
Once you’re certain that the device isn’t locked into a carrier, go to the next step, which is…
After ensuring that the device is unlocked, what you want to do next is to check if you’re at a spot that is covered by Boost Mobile.
They’re a pretty well-off provider, but that doesn’t mean they cover the entirety of the country.
So, using another Boost Mobile device, determine if where you’re at has a strong signal.
In addition to that, you can also check the reliability of the signal by going to Boost Coverage checker tool and input your address/location to check.
Then, you would want to check and examine the SIM card to see if there are any signs of damage on it.
Usually, people forget that not all SIM cards are created perfectly and equally.
Check the contact or the gold part of the SIM card and see if there are any scratches or cuts on it.
NOTE: If there’s chipping on the body of the SIM card (not including the contacts), it should be fine.
What’s important would be the contact of the SIM card or what the sensors would determine.
When you’re done checking the SIM card, the next thing you want to check is the phone itself.
Most, if not all smartphones today are equipped with internal antennas, which are usually installed on the upper-right back part of the phone.
Perform a thorough check and see if there are damages on this part of the device.
And finally, after you’re done with all those preliminary steps to ensure that the activation would work, perform a manual updating of the data profile of your device.
Don’t worry if you’re using Android or iOS – we’ll teach you both these processes!
- Navigate to the Phone App or the app you use for calling.
- Dial ##873283# and hit Call.
- From there, tap OK to initiate the start of the update.
- Wait for the update to finish.
- Restart or power cycle the phone.
- Tap the Phone App on your Android device.
- Dial ##72786#, and then hit call.
- By default, your phone will restart.
- When it boots back up, it will automatically begin hands-free activation.
- Hit OK or Confirm when the process is finished.
- From here, you just have to confirm all system actions.
- Wait for the final result or confirmation to be done, and then tap OK.
NOTE: In updating the data profile on your Android phone or iPhone, ensure that you are at a spot or a location where Boost Mobile is available.
You can refer to step #2 to see if you have acceptable reception.
Once you’re done with all these steps, your new device that’s under the Boost Mobile network should now be activated!
If you notice that your Boost Mobile hands-free activation is not working, just follow these steps and get over it immediately!
You should be able to see the Boost Mobile signal or reception on your phones, symbolizing that it’s already ready to receive incoming texts and calls, as well as make outgoing ones!
If the activation of your Boost Mobile device isn’t working, check if the device is unlocked first. Then, examine the device and the SIM card and check if there are damages. Proceed to update the data profile on the phone and start the process again.
But after you’ve done the process, the device is still not activated to the Boost Mobile network, contact Boost Mobile’s customer service immediately.
Let them know about the troubleshooting steps you’ve done in accordance with the dilemma or problem you’re having.
From here, they’ll try to determine and distinguish what the problem is, and they’ll help you solve it.
Read Next: Why is Boost Mobile Hotspot Not Working?
The next time you encounter the Boost Mobile activation not working situation, you have this tutorial you can always go back to for guidance.
No matter how easy or how complex you think the process is, this tutorial will tell you otherwise! We composed this to give you a better take on how you can comprehensively approach this dilemma.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.