How to Reset Rogers Ignite Remote? Complete Guide

Are you looking at how to reset Rogers Ignite remote but getting no luck? Well, today is your lucky day!

You might have encountered a few issues or have a brand new TV. Now, you want to pair your Rogers remote, but you can’t seem to find a way to reset it.

It will not respond right away since Rogers remotes are the universal type. You will need to reset and reprogram it to use it with your new device.

Resetting your Rogers Ignite remote is a quick process. Look for the Setup button, press and hold it. Wait for the light to change from red to green. Enter the reset code, 981. The LED light will flash to confirm the reset. You can now pair it with your new equipment.

If your Rogers remote does not work with new equipment, let’s look at some of the instances where you will need to consider resetting it:

Reasons to Reset Rogers Ignite Remote

The primary sign that you will need to reset your Rogers Ignite remote is if it stops working with new equipment.

If you recently bought a new TV or added a new soundbar to your entertainment setup. You would be lucky if the remote works right away.

Here are some of the reasons that it’s time to reset your remote, so it works with your equipment:

1. Unable to Control your TV or Box

If your Rogers remote stops working with your current TV or box, a reset is one of the options you can do.

2. Use With your New TV

Getting a new TV means that your Ignite remote will not work right away. Unless you get one from a similar brand, you will need to reset your remote so you can program it for your new TV.

3. Use with Replaced your Ignite TV Box

Replacing your Ignite TV box will also cut the connection between it and the remote.

You will need to pair it again to change channels and watch your favourite programs.

4. Use a New Entertainment Device

Your Ignite remote works with AV receivers and soundbars. If you want to use it with your new equipment, you will have to reset and reprogram it.

These are some reasons why a reset is warranted with your Rogers Ignite remote. Let’s proceed to the steps so you can start using your remote.

How to Reset Rogers Ignite Remote

If you are still asking how to reset my Rogers Ignite remote, let’s get to it.

Before you start resetting your remote, you want to make sure your remote is working 100%.

Your remote may be malfunctioning, so you want to eliminate that chance.

Here’s the step-by-step guide to reset your Rogers Ignite remote properly:

Step #1: Check Your Remote

Checking your remote may not seem incredibly helpful when resetting your remote.

However, you need to do it to ensure that there is nothing wrong with your device.

It’s possible that your remote is not responding since its batteries are empty. IR receivers are also particularly prone to obstructions that you will think your remote needs a reset.

It’s better to check on these to conclude that your remote needs a proper reset and reprogram.

Here are the steps you need to follow to check your remote:

1. Press the power button with your current setup.
2. Check if it turns on your TV or box.
3. Press a button and look for the LED to light up red or green.
4. If the LED does not light up, replace the batteries.
5. Press the Mic button and say “Help.” The troubleshooting menu will appear.

Step #2: Reset Your Rogers Ignite TV Remote

Now that you know your battery levels are good, IR receivers are working, and the voice command feature is active, you can reset your remote.

At this point, even if you pair or reprogram the remote, it will not resolve your issue. You will need to flush out the previous pair settings, and a reset will do the trick.

Rogers Ignite TV has two remote models. One is the XR11, and the other is the XR15.

Both are programmable universal remotes, with a voice command feature allowing you to use them for hands-free operation.

These are also incredibly versatile as you can control your TV, Ignite Box, and other devices.

Whether you have the XR11 or the XR15, here’s how to reset your Ignite remote:

Resetting your XR11 Ignite Remote:

1. Press the Setup button and hold for at least 5 seconds.
2. Wait for the light to turn green.
3. Enter the reset code: 981.
4. The notification light will start flashing.
5. Your remote is now reset.

Resetting your XR15 Ignite Remote:

1. Press and hold the A and D buttons at the same time.
2. Wait for the light to change from red to blue.
3. Enter the reset code: 981.
4. Wait for the light to flash.
5. Your remote is now reset.

Note: After successfully resetting your remote, the work does not stop there. 

Essentially it flushes all of your previous settings and forgets them. You will need to pair and program them again to your devices.

Step #3: Pair Your Remote with the Ignite TV Box

Now that your remote’s settings are currently wiped clean, nothing you can do with it.

It will not be able to control your TV’s volume levels or change the channels on your Ignite box.

The first step you need to take after resetting your remote is to pair it with your TV box.

It’s a good first step to check if your remote still works after the reset process.

Before proceeding, make sure that your TV and box are powered on.

Here’s how to pair your remote with your TV box:

Pairing your XR11 with your Ignite TV Box:

1. Press the Setup button on the remote.
2. Wait for the light to turn green.
3. Press the Rogers button. Wait for the LED to flash green.
4. Your TV screen will show a 3 digit code.
5. Enter the numbers on your remote.

Pairing your XR15 with your Ignite TV Box:

1. Press and hold the Rogers and Info buttons.
2. Wait for the light to turn green.
3. A 3 digit code will appear on your TV.
4. Type this into your remote to complete the pairing process.

Note: Be patient. The 3 digit code can take a while to appear on your TV screen.

Pro Tip: After you complete the pairing process, you can now use the remote’s voice command feature to change the channel, search for shows, and many more.

The remote also uses Bluetooth technology, so it will work even if you do not have a direct line of sight with the box.

Step #4: Program Your Remote for your TV

After resetting your remote, you want to program it to work with your TV so you can control the volume.

Both these Rogers Ignite TV remotes come with an auto-detection feature, which will make the process a lot easier.

It will automatically detect your TV brand and model and uses the instruction set so you can start controlling it.

If you are expecting to enter pairing codes, you’re in luck, as it’s not required with either the XR11 and XR15 remotes.

Here’s how to program your remote to work with your TV:

1. Press the A button on your remote.
2. Choose Remote Setup.
3. Go to Remote Settings, then Voice Remote Pairing.
4. Test the remote to confirm that it works with your TV.

Note: Alternatively, you can also use the remote CodeFinder tool to look for your TV brand and model’s pairing code.

Step #5: Program Your Remote for Audio Devices

Your Rogers remote can also pair up with your audio devices like AV receivers and soundbars.

Using it should make your life easier by holding a single remote rather than three.

To pair your remote, you can also rely on the CodeFinder tool to look for the specific brand and model of your device.

Here are the steps to program your remote for your audio devices:

1. Turn on your TV and audio device.
2. Press the Setup button and hold it until the light turns green.
3. Look for the 3 digit code of your device using the CodeFinder tool.
4. Enter the 3 digit code on your remote.
5. Test the remote to confirm it’s paired up properly.

Note: The Rogers Ignite remote supports audio devices from many brands, including Samsung, Sony, Bose, Yamaha, and more. 

As long as you get a recognizable brand, the remote should be able to pair with it.

If resetting does not allow you to reprogram your remote with your TV, box, and other entertainment devices, consider contacting Rogers for assistance.

Read Next: How to Sync Rogers Ignite Remote with TV?

Bottom Line

Thus, to reset your Rogers Ignite remote, the code you are going to use is 981. Press and hold the Setup button, then enter the reset code. Wait for the notification light to start flashing, indicating your remote has successfully reset.

You can now program the remote to your devices.

Now that you know how to reset Rogers Ignite remote, you are ready to set up your brand new TV and entertainment devices. Simply follow the steps we described and contact Bell if you need more help.