Wondering how to sync Rogers Ignite remote with TV? The Rogers Ignite TV service offers you a universal remote allowing you to use it with your TV and other entertainment devices.
So, it’s fair to say you want to know how to sync it with TV. It’s not a complicated process at all. It’s simple and will take no more than a few minutes to complete.
Syncing your Rogers Ignite remote with your TV is a fairly simple process. You want to make sure that your TV is on. Press the A button on the remote, then choose Remote Setup. Enter 991 for the code, then press the Channel+ button until your TV turns off. Press the Setup button again to confirm the pairing process.
How to Sync Rogers Ignite Remote with TV
How to pair Rogers Ignite remote with TV? Since it’s a universal remote, you can sync it up with your own entertainment devices.
You can also do it with your TV, so you only use a single remote.
It’s certainly a convenient setup since you eliminate the need to always have two remotes beside you when watching your favourite shows.
Step #1: Pair Your Rogers Remote with Your TV
The Rogers remote will not work with your TV out of the box even though it’s a universal remote. However, there are steps you can follow so you can use it with your TV.
At least with the Rogers remote, you do not have to worry about getting another universal remote since it will be able to control them.
Here are the steps to pair your Rogers remote with your TV so you can use it to power it on, set the volume, or even go into your TV’s settings:
Check Your Remote Model
The first thing you need to do is to find out which Ignite TV remote Rogers provided you.
They have three types, the Rogers Big Button, XR11, and XR15. Don’t worry about getting one or the other as they offer the same features.
Check Your Batteries
After finding out the type of remote you have, you will want to power up your TV so you can start the pairing process. You will also need to check the batteries of your remote.
To do this, press any button on the remote and watch out for the LED notification light to flash red or green. If it does not light up, replace your batteries.
Check Voice Function
Finally, since the provided remotes are voice-enabled, you want to check if the feature works properly by pressing the Mic button and saying “Help.”
The Troubleshooting Menu should come up on your TV screen.
For the XR11 Remote:
- Press the Setup button.
- Wait for the LED light to change from red to green.
- Enter 9-9-1 as the code. Wait for the LED to flash green twice.
- Press the Channel+ button multiple times.
- The TV should power off. Press the Setup button to confirm.
For the XR15 Remote:
- Press the A and D buttons simultaneously.
- Wait for the LED light to change from red to green.
- Enter 9-9-1 and wait for the LED to flash green twice.
- Press the Channel+ button until the TV turns off.
- Press the Select button to confirm the pairing process.
For the Rogers Big Button Remote:
- Press the TV Power button on the remote.
- Press the Setup button and hold.
- Wait for the LED lights to blink twice.
- Enter the TV code found in your remote’s manual.
- Press the TV Power button to turn off your TV.
That’s it. Whether you have the XR11 or the XR15, you should be able to use them to control your TV.
You will be able to fully manage all of the features of your TV without relying on its remote.
It might not seem like a big deal, but having multiple remotes to control a different device can get confusing since you also have the Rogers Ignite Box.
Now that you have paired your Rogers remote with your TV, you can now use it to control the box, TV, and other devices you have.
Note: The Ignite Big Button Remote is a capable remote for your Ignite TV.
However, it does have a few limitations compared to the XR11 and XR15. Specifically, it does not come with voice commands and Bluetooth.
Step #2: Pair Your Rogers Remote with Your Ignite TV Box
Now that you have synced your remote with your TV, it’s now time to do it with your Rogers box.
Doing this will allow you to change the channels to watch the shows you love.
Pairing the remote and your TV box properly also opens up other features like voice commands and the ability to search for shows.
These even work even if you are in another room, so everything is set once you sit on the couch to watch TV.
Here are the steps to pair your Rogers remote with your Ignite TV Box:
For the XR11 Remote:
- Press the Setup button.
- Wait for the LED light to change from red to green.
- Press the Rogers button.
- Wait for your TV screen to show a 3 digit code.
- Press the numbers on the code on your remote.
For the XR15 Remote:
- Push and hold the Rogers and Info button at the same time.
- Wait for the light on your remote to change from red to green.
- Your TV will show a 3 digit pairing code.
- Enter the numbers into your remote to confirm.
For the Rogers Big Button Remote:
- Turn on your Ignite TV box.
- Press the Setup button until the LED blinks twice.
- Press the Cable Power button.
- Press the OK/Select button.
- Let go of the Setup button when the Ignite box powers off.
You will now be able to control your Rogers TV box with your remote.
Its voice command feature will also make your life a lot easier since you do not necessarily need to push buttons on your remote to change the channels or search for your favourite shows.
Step #3: Pair Your Rogers Remote with Your Other Devices
Do you have an AV receiver or a soundbar in your entertainment center?
The good news is that the Rogers universal remote will allow you to connect with these devices and control them.
All you need to do is program or pair the remote to other equipment in your home theatre system.
Here’s how to pair or sync your Rogers remote with other devices:
- Push the A button on the Rogers remote.
- Select Remote Setup.
- Follow the instructions shown on the screen.
If you have the Rogers Big Button remote, you will be able to pair it with other devices like DVD players and VCRs.
You can use the procedure on Step #1 and look for the device code on the remote’s manual.
Note: If you could not pair your device this way, you can still use remote codes to sync them to the remote.
The Rogers remote is not capable of syncing to all audio and video equipment.
However, it does support most of the major brands like Samsung, Sony, LG, Bose, Vizio, JBL, and a lot more.
Thus, you can the Rogers Ignite remote with your TV in no time. All you need to do is press the A button on the remote and choose Remote Setup. Simply follow the onscreen instructions, where it will show a 3 digit code that you need to input on your remote. That’s it!
Read Next: How to Watch Netflix on Rogers?
Last Thoughts
If you now know how to sync Rogers Ignite remote with TV, we hope this blog has done the job for you.
Getting your Rogers remote to work with your TV and other entertainment equipment is incredibly convenient.
The voice commands are an excellent addition that you can use in case you do not want to be pushing buttons.
Additionally, if you are still having issues getting your remote to pair with your TV, you can always contact Rogers’ customer support.
It’s possible that you may have a faulty remote, and you can quickly get that replaced by calling them at 1 888 764-3771.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites. Check out more about him here.