Many people wonder, “Why does my shark ion robot keeps shutting off?”.
Yes, it can be very frustrating when your robot vacuum malfunctions. Luckily, we know how to solve this problem.
If you don’t know why your Shark Ion robot keeps on shutting down and not cleaning, you can be in big trouble.
The good news is that there are proven solutions to this particular issue. You can get your vacuum running again in 10 minutes or less.
Don’t worry! We’ve got some helpful tips to solve your problem.
To fix your Shark Ion robot keeps stopping issues, allow your device to rest and charge in its charging dock. Then, clear its working area of obstructions.
If you think the problem is dirt, clean the bumper sensors, dust filters, and brushes. Make sure you empty the bin, too.
Before we get into the details of our solutions, let us discuss why your Shark Ion robot keeps shutting off.
Why Does My Shark Ion Robot Keeps Shutting Off
A robot vacuum will malfunction because of two things: the vacuum is stuck or clogged.
Once you clear the floor of obstructions and clean the vacuum parts, your Shark Ion robot should work normally.
✅ Clogged brushes
The most common cause is clogged brush rollers. The robot vacuum will stop when the brush rollers are clogged and give an error message. You will see the Dock and Spotlights blink repeatedly.
✅ Dark floors and obstruction
Household items may be blocking the path of your robot vacuum. Furniture and children’s toys obstruct the destination of your device, causing it to stop and shut off.
✅ Overheated motors
Your vacuum may be clogged with dirt and debris, causing the motor to overheat. You may have forgotten to empty the bin or clean the filter.
✅ Sensor malfunction
If your device keeps running into obstructions, the problem is with the sensors. Either the sensors are dirty or need adjustments.
✅ Battery issue
The battery is no longer able to hold a charge. Your Shark Ion robot shuts down unexpectedly and keeps beeping on the charger.
These are the possible reasons your Shark Ion robot keeps shutting off. Now, let’s move on to the troubleshooting methods.
Easy Ways to Fix Shark Ion Robot Keeps Stopping Issue
When your Shark Ion robot suddenly stops and shuts down, don’t panic. First, return it to its charging dock.
The battery may just be depleted. Charging it also gives it time to rest in case of overheating.
If this doesn’t fix the issue, inspect other possibilities. The solutions below are designed to help you with this task.
Solution #1: Check the Surroundings for Obstructions
Inspect for any obstructions in the working area of your robot vacuum. Maybe it is stuck and can’t move. An object may have fallen on the floor, or something corners your device.
If you find your Shark Ion robot always stopping on a dark surface, the lack of lighting may be causing the problem.
Robot vacuums also cannot process IR rays so they may face issues with your dark carpet or floor.
Here’s what you should do to clear your floor from obstructions that can stop your Shark vacuum:
- Clear any electrical cords crossing the floor for easy cleaning.
- Tie up long curtains before sending your robot out.
- Tuck in the tassels of your rugs or carpets.
- Pull your chairs away from the table to give your robot room to maneuver.
- Set your Shark robot’s charging dock away from the furniture.
Solution #2: Clean Your Shark Robot’s Bumper Sensors
Your Shark Ion robot should be able to go around your home’s usual obstructions with the help of its bumper sensors.
After clearing out the major ones and your robot vacuum continues to shut off or stop in the middle of cleaning, you want to take a look at these sensors.
One of the most common things that happen is that dirt and dust can lodge in the sensor tripping it.
Your robot will think it’s bumping into objects when it isn’t. It can cause your robot to malfunction or not work properly, even shutting it off.
Here are the steps to clean your Shark robot’s bumper sensors:
- Flip the robot, so you have access to the bumper’s screws.
- Using a 2mm screwdriver, remove the screws.
- Lift up the bumper from the robot.
- Get a clean, dry cloth and wipe down the area.
- Reassemble the bumper.
Note: If there's a thick layer of dirt and residue, you can use a 70% isopropyl alcohol solution to clean it.
Solution #3: Empty the Robot’s Bin
Shark robot vacuums come with a dust bin on the device itself. Even if you have the more high-end models with a dock, your Shark robot still needs a place to collect the dust from your floor.
Whenever the dust bin gets full, it can mess up your robot vacuum’s performance by shutting it down.
If you can’t find anything wrong with your robot, you can check the dust bin to see if it’s full or not. Emptying it should do the trick and get your robot vacuum working again.
Here’s how to empty your Shark robot’s dustbin:
- Press the power switch on the side of your vacuum to turn it off.
- Locate the dust bin removal button and press it.
- Press and hold the release button to open the dustbin.
- Throw the contents of the bin into the trash for disposal.
Note: You can also wash the dust bin to ensure all dust particles are cleaned out thoroughly.
Solution #4: Clean Your Robot’s Dust Filters
It’s not just the dustbin you need to watch out for. If the dust filters are covered in dust and dirt, it can stop your Shark Ion robot from working.
Your robot vacuum can figure out if it can suck in air properly.
If it can’t, it will shut down to avoid overheating.
You want to clean your robot’s dust filters so your vacuum can suck in the air and clean your floors more effectively.
Here’s how to clean your Shark robot’s dust filters:
- Turn off the vacuum by flipping the power switch.
- Remove the dust bin from the robot.
- Find the pull tabs of the filter from the dust bin.
- Tap the filter to remove trapped dust.
Tip: Do not wash the filter, as it will ruin its filtration capabilities.
Solution #5: Clear the Robot’s Main Brush of Dust and Debris
Several ways can stop the Shark Ion robot from cleaning your floors.
If it’s not a dust bin filled to the brim or a filter covered in dirt, it’s usually the brushes. Too much dirt can accumulate on your robot’s brushes.
Hair is one of the main culprits that allow your robot vacuum to collect dust and dirt on the brushes.
It can get tangled and jam in between the brush bristles collecting other particles in the process.
It can quickly become an obstruction that can stop your robot vacuum from working.
Here’s how to clean your Shark robot’s brushes:
- Turn off your Shark robot vacuum using the switch.
- Flip the robot upside down to have access to the brushes.
- Unscrew the main brush roll from the vacuum.
- Unscrew the side brushes.
- Pull out the hairs and accompanying dust from the brush.
Note: You can wipe the main brush roll using a clean cloth.
Solution #6: Lubricate the Brushes
Dust and dirt can cause your robot’s components to dry up.
After cleaning out your brushes and your Shark robot still shuts down or stops in the middle of a cleaning session, you can consider lubricating it.
The gears can stop spinning when they’re dry and cause your robot vacuum to stop working. You will only need to lubricate the moving parts.
Here’s how to lubricate your robot’s brushes and other components:
- Turn off your Shark robot vacuum.
- Unscrew the main and side brushes from the robot.
- Use a gear oil or dry lubricant solution.
- Put a couple of drops on the exposed parts of the main roller and side brushes.
Note: You can also lubricate the wheels for optimum performance.
These troubleshooting solutions should help you fix your Shark vacuum from shutting off or stopping.
If none of these steps work, you can also try factory resetting your robot vacuum. You can also contact Shark customer service to ask for repair assistance.
Bottom Line
Now that you know why does my Shark Ion robot keeps shutting off, you can follow these proven solutions to get it up and running.
Even if you’re not a handyman, as long as you have a screwdriver, you should be able to fix it and get it cleaning your home in no time.
Read Next: Shark Robot Vacuum Not Turning On? – Here’s How to Fix
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.