TalkTalk Router Login : The Definitive Guide

TalkTalk Router login should be done properly. If you facing difficulty to do Talktalk Router settings, then this guide is for you.

This is going to be a complete guide to TalkTalk Router Login Settings in 2020.

So if you have a question about:

• How to assemble your talktalk Internet device.
• How to change your router’s password.
• How to find your device’s IP address.

Then you’ll love the actionable techniques in this new guide. Let us start without any further delay.

Talktalk Router Settings

For Talktalk Router settings and login first, you must check the devices and accessories that will be used in the setup process i.e.,

• Router
• Power wire
• Broadband wire
• Ethernet wire (optional)
• micro-filters. 

Check the installation package provided by the company to find all these things. After you got these things ready, we could move to the practical part. 

For easy understanding, we have split the whole process into two parts and they are:

• Assemble your Device
• ​Login your TalkTalk Router Dashboard

​And we introduced different steps for Wi-fi Hub and Super Router.

You could go straight to the question you met in the login or follow our steps one by one if you want to do TalkTalk Router Settings

Part - I

Assemble TalkTalk Router

When you receive your device package, you receive many things like a router, connecting wires, cables etc. So, our first step will be to connect all the things together so that we can use the device.

So, let us learn how you can assemble your device and do TalkTalk router settings.

If you bought a Super Router

Step #1: Ready your master socket

You need to find the master socket in your home. Usually two types of wall plugs you can find there:

Type One: Standard master socket: You need a micro-filter to connect your telephone or router due to only one port.

Type Two: Pre-filtered master socket: Here your wire is separated, one is for your phone and the other is for broadband connection.

You can put your device directly into a pre-filtered master socket.

Step #2: Connect your Router

You should set up your router depends on the socket you have at home. Choose yours from one of the below.

Type One: Standard master socket

• You should put the micro-filter with the broadband wire into the socket.
• You should put the other terminal of the broadband wire into the broadband port on your Super Router.
• Insert the power wire into the Super Device’s power port
• Switch on the power socket.
• Push the Super Router’s power button.

Type Two: Pre-filtered master socket

• Put the broadband wire straight into the top or left-hand port on the socket.
• Put the other terminal of the broadband wire into the broadband port on your Super Device.
• Put the power wire into the Super Router’s power port, and press it into the wall
• Make the switch one.
• Push the power button

Step #3: Place your Router right

• Place the wireless device in a centralized area for maximum wireless coverage for the network devices.
• For the best front-to-rear coverage, place the device in an upright position.
• For the best up-and-down coverage, set the Talk Talk in an inclined position.

Step #4: Check your Router’s light

• Make sure the power light is Green.
• If the Internet light is Green, it means you’re connected to broadband.
• When Wireless light is blinking, you’re connected to Wi-Fi

Step #5: Connect your devices to your wifi

• Find your router’s wifi-network and password on the back of it
• Find the same wifi-network and enter the password on the wifi setting of your device
• Then you can go any website and check the signal

If you bought a Wi-Fi Hub

Step #1: Ready your master socket

Usually the phone socket at home. Mainly two types of the master socket in your home:

Type One: Standard master socket:

• You need a micro-filter to connect your phone or device due to the only one port.

Type Two: Pre-filtered master socket:

• Here your wire is separated, one is for your phone and the other is for broadband connection. 
• You can put your router directly into a pre-filtered socket.

Step #2: Make your Wifi Hub connected

You should assemble your device based on the socket you already have at home. Choose a suitable one from one of the below.

Type One: Standard master socket

• Put the micro-filter with the broadband wire into the master socket
• Put the other terminal of the broadband wire into the broadband port on your Hub
• Put the power wire into the Wi-Fi Hub’s power port, and press it into the wall.
• Turn on the power socket.
• Push wifi hub’s power button
• The light on the front of the Hub will appear.

Type Two: Pre-filtered master socket

• Put the broadband cable straight into the top or left-hand port on the socket
• Put the other terminal of the broadband wire into the broadband port on your Hub
• Insert the power wire into the Wi-Fi Hub’s power port and put it into the wall. Turn on the switch
• Push the Wi-Fi Hub’s power button
• The light on the front of the Hub will appear.

Step #3: Place your Router right

• Place the wireless device in a centralized area for maximum wireless coverage for the network devices.
• For the best front-to-rear coverage, place the device in an upright position.
•  For the best up-and-down coverage, set the Talk Talk in an inclined position

Step #4: Check your Router’s light

• Make sure the power light is Green.
• If the Internet light is Green, it means you’re connected to broadband.
• When Wireless light is blinking, you’re connected to Wi-Fi

Step #5: Connect your devices to your wifi

• Find your device’s wifi network and password on the back of it
• Find the same wifi network and enter the password
• Then you can go any website and check the signal

Part - II

Talktalk Router Login

If you want to make more settings, like changing your device password or change your Wi-Fi’s network name, you should go to your dashboard page. But before doing this, you need to Log In to the dashboard.

If you do not know how to do TalkTalk router login, read the following and follow the steps.

TalkTalk Router Login IP Address

While setting up the device, you will need the TalkTalk router IP address. If you enter the wrong Talktalk IP address, you cannot log in to the device. 

The  Talktalk router IP address that you will need for the device set up is 192. 168. 1. 1

Talk Talk Router Login

For doing the setup, you must remember that there are two different dashboards. They are TalkTalk Wi-Fi Hub and TalkTalk Super Device. Find the one that meets your needs and let us know how we can do the TalkTalk router login easily.

# TalkTalk Super Router Login

Steps

• Open your browser and type in 192.168. 1.1(Talktalk device IP address) and load to the talk talk dashboard page
• Enter your device user name and password shown on the sticker attached on the back of your Super Router

• Click the Maintain button in the upper right corner  
• Click Account Management from the left navigation bar

• Click Edit under Change WEB Account Password
• Enter your current and a new password
• Click Save after confirming it

#  TalkTalk Wi-Fi Hub Login

Steps

• Open your browser and type in 192.168.1.1 (Talktalk router IP address) and load to the talktalk dashboard page
• Login to TalkTalk Wi-Fi Hub with your device user name and password. You’ll find these on the sticker after you removing the wifi information card.
• Select See Internet Settings on the left.

• Click Manage advanced settings shown in purple
• Choose Access Control

• Find the User tab
• Enter your current and a new password
• Click Apply after you confirm it

Conclusion

We hope after reading this article you can perform a TalkTalk router login. After knowing the IP address there are many things associated with an internet device set up.

Make sure you follow all the steps one by one and do the Talk Talk router login at ease.