Are you experiencing PS4 light is white instead of blue and want to know how to fix it? We have the solutions!
You might have noticed your power indicator light start to flash white instead of blue. When this happens, you know there is something wrong with your system.
Although you will still be able to use your console, you want to take action right away and start getting to the root of the problem.
Seeing the white light on your PS4 can be a cause for alarm. However, you can fix it even without any technical experience. The main reason is a lack of connection between the console and TV. Tightening the HDMI connectors or replacing the cables will do the trick.
Let’s look at why your PS4 is flashing white instead of blue. We can then move on to the troubleshooting steps so you can resolve this issue as soon as possible.
Why is My PS4 Light White Instead of Blue
Apart from a bad HDMI connection, other factors cause this problem. A quick physical check is always recommended since any damage to your console will cause this issue to come up.
Your controller is also another component you want to focus on when dealing with this particular problem.
Here are some of the things that can go wrong that will light up the white LED rather than the blue one:
1. HDMI Issue
Poor HDMI connection can cause this particular issue with your PS4. It’s either a faulty cable or a blown chip inside the HDMI module.
2. Dirt or Dust Stuck Inside
Not the most common cause of this issue, but it’s also worth considering to have all the bases covered.
3. Faulty Controller Driver
Your controllers can cause this white light issue on your PS4. It’s either outdated drivers or a glitch in the firmware.
4. Hardware Malfunction
Problems in the motherboard caused by an electrical failure or overload are another cause to look out for. Resistors or capacitors can fail enough to trigger this but not cause a more serious issue.
Now that you have a deeper understanding of this particular PS4 problem, we can move forward and start fixing it.
Let’s proceed to the most effective troubleshooting steps so you can play with your PS4 without worry.
How to Fix PS4 Light is White Instead of Blue
The first thing you need to do to solve this problem is to reboot your PS4.
It’s possible that the issue is a temporary minor bug that a quick restart can get rid of.
You also want to try a complete power cycle by unplugging your console for at least 5 minutes.
If a restart or power cycle does not resolve this issue, we can move on to other proven troubleshooting steps that will take care of this problem:
Solution #1: Tighten the HDMI Connections
The next thing you want to take a good look at is your PS4’s HDMI connections. Any damage to the connectors or cables can trigger this problem.
Even loose connections can cause this issue, and you will have to check them carefully.
While you are checking the connectors on your console, don’t forget the ones on your TV as well. They are also likely to cause the issue if the damage is on that end.
Here’s how to check and tighten the HDMI connections between your console and TV:
- Check the HDMI cable between your PS4 and TV.
- Check the HDMI connectors on your PS4.
- Check the HDMI connectors on your TV.
- Take a peek inside and look for signs of damage.
- If the problem is with your TV, try using your PS4 with a different one.
Note: If you see no signs of damage, consider replacing your HDMI cable since the damage might be inside the insulation.
Solution #2: Check for Visible Hardware Issues or Damage
After thoroughly checking your HDMI cables and connectors, you will need to look at the damage to other components.
It could be a simple ding on the exterior that has affected some motherboard elements causing the issue.
Here’s how to check your PS4 for physical damage:
- Place your PS4 vertically or standing up.
- Check the power supply by looking at the AC connector and cord.
- Inspect the hard drive for damage and if it’s secure in the bay.
- Elevate your console to avoid dust and dirt.
- Clean your PS4’s vents using compressed air.
Note: Dust and dirt is also a big factor since a build-up can cause overheating, which can ruin the electrical components of your PS4.
Solution #3: Reset Your PS4 Controller
An error with your DualShock controller driver can cause this white light issue with your PS4.
It may not seem connected, but resetting your PS4 controller can eliminate this problem.
One of the ways you can do that is to reset the controller. It’s a simple process that you should be able to perform without any additional help.
Here’s how to reset your PS4 controller:
- Turn off your PS4, then unplug it from the wall socket.
- Look for the Reset button at the back of the controller.
- Use a tool or a pin to push the small button inside the hole.
- Hold for about 5 seconds.
- Connect your controller to the PS4 with a USB cable and press the PS button.
You’ll know that the controller has successfully paired with your console if the light bar turns blue, not white. Your problem with the white light on your PS4 should be resolved.
Tip: If you’re having a hard time looking for the reset button, it should be near the L2 button.
Solution #4: Restart Your PS4 in Safe Mode
Putting your PS4 into Safe Mode allows you to further investigate the issue without causing more harm to your console.
You will be able to perform various troubleshooting steps there that can resolve your PS4 white light issue.
Here’s how to restart your PS4 in Safe Mode:
- Turn off your PS4 by holding the power button for 3 seconds.
- It will blink a few times, then shut down.
- Press and hold the power button.
- Release it only after you hear the second beep.
- Your PS4 will start in Safe Mode.
Now that your console is in Safe Mode, you can take a few troubleshooting steps to look for the root cause of your issue.
We recommend updating your system software, initializing your PS4, and rebuilding the database.
Pro Tip: Make sure that you connect your controller via USB after it restarts in Safe Mode.
Solution #5: Perform a Factory Reset
Your PS4 is certainly a wonderful gaming machine. However, it’s not perfect, and after a few months or years of running, a factory reset might be what it needs.
If you are getting the white light issue, it will be a frustrating experience if your console freezes in the middle of a game.
The good news is that a factory reset is a straightforward process that can fix a lot of issues, including this one.
You can consider this as a last resort if nothing works, but it does wonders when you are in the middle of troubleshooting an annoying error.
Here’s how to perform a factory reset on your PS4:
- Go to your console’s Settings.
- Choose Initialization.
- Click on Initialize PS4.
- Choose Full, then Initialize.
- Click on Yes to confirm.
Alert: A factory reset will wipe clean your hard drive, so make sure to backup your saved games and other important files.
These troubleshooting steps should help you fix your PS4 white light issue.
If none of these steps fail to fix your problem, you can always contact PlayStation support to see if your console needs repair or replacement.
Read Next: How Much Data Does Hotspot Use for PS4?
You now know the causes and how to fix your PS4 light is white instead of blue problem.
It’s an easy issue to fix, and all you need to do is follow the instructions we described carefully.
So, it’s going to be really up to you, and you will be rewarded with a fixed console that will allow you to enjoy your favorite games.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.