No lights on Starlink router typically means no power. It’s very frustrating when everything is connected, but there is absolutely no light on the Starlink router and you’re getting concerned. Fear not.
Whether you’re a non-tech or novice user, we will help you diagnose and resolve your Starlink issue in a matter of minutes so continue reading!
If there is no light on your Starlink router, then obviously, your router is not turned on, or not working because no power reached the device.
Hence, the solution is to check your A/C line, Starlink power equipment, a power outlet, and of course your router’s operation.
Let’s move further to discuss the underlying reasons!
Starlink No Lights On Router – Why?
There are different factors that can prevent your Starlink router from turning on, and of course, the light won’t be on.
So it is crucial to first have a proper understanding of possible reasons to effectively address the problem with your Starlink router.
Let’s have a look, shall we:
Now that we know the reasons, let’s start troubleshooting against each possibility!
How to Fix When There Are No Lights On Starlink Router?
Tip: Follow every method step by step!
1. Check Your A/C Circuit Breaker!
When your router has no light on indicators, then it’s essential to first ensure that the main power source is functioning correctly.
In such a scenario, sometimes a tripped circuit breaker can lead to a power outage in your entire home, so flip the lights switch to confirm.
Plug the Starlink router directly into the power and avoid power strips!
When you are sure that there is nothing suspicious with the circuit breaker, then check to see if there are any indicator lights on your router.
Also, test the other outlets of your home that will help you track whether the problem is with every outlet or specifically with the router’s outlet.
Note: Any A/C power fluctuations can prevent your Starlink router from turning on!
2. Power Cycle the Starlink Router
One of the most effective techniques against power-related problems on any router, not only the Starlink units, is the power circulation method.
This process does not erase anything and will not impact your WiFi or internet in any way, but will refresh all Starlink router operational services.
Here is how to power cycle the Starlink router:
- Turn the router’s socket switch to the OFF position.
- Unplug the router’s power adapter from the socket.
- Leave the unit unplugged for about 5 to 10 minutes.
- Plug the router power adapter directly into the outlet.
- Then, turn the router’s socket switch to the ON position.
Note: This method can potentially help with re-establishing proper communication with the Starlink satellite dish.
3. Verify Starlink Power Equipment
One obvious reason why your Starlink router has no light can be a loose connection of the AC power cord or adapter either with the outlet or router.
So, without wasting your time and effort, let’s quickly learn how to properly inspect the Starlnk power equipment from top to bottom!
- First, unplug your Starlink router from the electrical outlet.
- Remove the router’s power adapter from the wall socket.
- Disconnect the AC power cord from the back of the router.
- Tip: Inspect the full length and both ends of the power cord!
- Look for any bent connectors, body rips, cuts, and damage.
- Firmly and securely reconnect the AC power on both ends.
- Plug the router’s power adapter directly into the wall socket.
Note: If you found any defect or physical damage with the router’s AC power cord or adapter, then you need to replace the equipment.
4. Test With a Different Power Source!
If your Starlink router still has no indicator lights, it’s very likely that the power source, strip, or wall outlet is not functional.
This is why we recommend plugging the Starlink router directly into an electrical outlet in another room (a different A/C fuse), to check whether the lights will show.
This step is ideal because it will help to determine whether the initial outlet of your router is faulty or not.
When you are done plug your router into another outlet, then wait a few seconds and check for the indicator lights.
If the indicator lights come on after switching outlets, it confirms that the original outlet is the issue.
If not, then without any hassle, continue reading this guide to do more troubleshooting.
5. Inspect for Router Overheating!
If your Starlink router is overheating then it can lead to unexpected issues such as Starlink router no lights.
This typically happens due to a defensive mechanism that will turn off the Starlink router when the internal temperatures start to surpass the pre-set thermal margin.
Well, overheating during the warm seasons is quite normal, so here we’ll show you a few valuable tips to help you cool down your Starlink router.
What to do When the Starlink Router is Overheating?
- Power off the router and unplug the unit from the outlet.
- Set up your router on a flat, and well-ventilated surface.
- Avoid placing your router on surfaces such as carpets.
- Verify that the router is not located in an enclosed space.
- Turn on a fan blowing towards the Starlink router device.
- Open a window or turn on your AC to cool the room a bit.
When you’re ready with the tips above, the Starlink router should no longer overheat and the light should stay on as long as the router works.
In case there are no lights, keep reading!
6. Factory Reset Your Starlink Router
If you have tried all the steps but still there are no lights on your Starlink router, then try resetting the network settings to resolve the potential chances of software issues.
Luckily the Starlink router does not have to be working in order for the user to perform a factory reset, so this one is easy!
Note: For the Starlink router factory reset you need to use a functional power outlet!
How to Factory Reset the Starlink Router?
- Unplug the Starlink router from the wall outlet.
- Then plug the router adapter into the wall outlet.
- Then, repeat the first and second steps 6 times.
- Tip: Be quick and exact with the re-plugging.
- Your Starlink router will reset to its default settings.
When the reset on your Starlink router is done, then set up your WiFi by connecting your phone to the Starlink app.
Then, set up a new WiFi name as well as the WiFi password, and then the router lights should be there, as an indication that your Starlink network is working with no error!
7. Clean the Starlink Ports & Connectors
Sometimes, when everything looks to be alright, but your Starlink router is not turning on, then it’s possible that the power connector isn’t making contact.
Such issues typically appear when the Starlink router has been staying in a dusty environment due to server dirt accumulation.
Simply, clean and/or verify that the connector plugs securely.
So, what you need to do is carefully inspect the port and connector of the power cable and your Starlink router to verify that there are no obstructions.
In addition, you should use a dry and soft cloth to reach within the router’s power port and try to take out anything blocking the connector.
Info: If you notice any damage or bent components in your Starlink router equipment, it’s best to check whether your warranty is intact and contact Starlink directly.
One More Solution to Try At Home!
In case nothing helps and your Starlink router has no lights, hence the unit is not turning on, then it’s likely that the power cord is faulty.
Well, to do so contact Starlink Support for more personalized help and attention in regard to your router indicator lights problem.
Best of luck!
Quick Recap:
Hence, when you have no lights on Starlink router, then reset the circuit breaker, power cycle the router, and test by plugging the router into a different outlet.
In case this does not help, unplug and replug the Starlink into the wall 6 times, to perform a factory reset.
Follow us for more!
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.