My Epson ET 2650 won’t print? Is this a question that you’re currently asking? Let us share with you the most effective methods to get this issue fixed in just a few minutes.
With over 50 million high-capacity ink printers like the ET 2650 sold, there are a lot of users that are experiencing a similar problem to you.
We came up with these proven solutions, so you don’t have to waste your time.
Let’s take a closer look.
To fix your Epson ET 2650 not printing, you want to make sure that you have set it to default. A long print queue can also disrupt your problem, and you want to clear it up. Your printer may not have enough ink. That’s why it’s refusing to print your important documents.
It’s such a frustrating experience whenever your Epson ET 2650 printer stops working. Let’s explore the possible areas where this issue can come from.
You want to check your print settings and your printer’s ink levels. These factors can have a massive impact on your printer and can cause it not to print.
Here are some of the elements you need to look out for with your Epson printer:
1. Printer Is Not Set As Default
Whenever a printer is not set as the default device, print jobs do not automatically get sent to that printer.
2. Full Print Queue
If there are a lot of print jobs in the queue, the memory can get overloaded and stop your printer from printing.
3. Low Ink Levels
Your printer won’t be able to proceed to print your documents if it doesn’t have any ink. Make sure that your device has enough ink before you start a print job to avoid any issues.
4. Printer Settings
Your printer’s settings can affect your machine. A wrong configuration can prevent your printer from working.
Now that you know the different issues that can impact your printer, we can now move on to the complete troubleshooting guide.
You can now get this problem resolved so you can start using your printer for improved productivity.
Before you go ahead with the rest of these steps, you want to make sure that your printer is turned on.
Sometimes the reason why a device won’t work is that it’s simply switched off. You also want to check the connections between your computer and printer.
Once you’ve done these basic steps and your printer still won’t print, here are the next steps you should take:
One of the reasons why your Epson printer won’t print is it’s not set as the default printer.
Setting a default device makes the process of publishing a lot easier for your system.
When you have a default printer, all print jobs are automatically forwarded to that device. If you don’t have a default set, the print jobs can easily get lost.
Here’s how to set your Epson ET 2650 as your default printer:
- Open your computer’s Control Panel.
- Go to Devices and Printers.
- Right-click your Epson ET 2650 printer.
- Click on the Set as the default printer option.
Note: If this doesn’t solve your problem, there are a lot more steps that you can take.
When you have too many print jobs in the system, your printer can start to malfunction by refusing to print.
Its memory may be overloaded, and it’s not able to process any more additional information.
The quickest way to resolve a memory issue with your printer would be to delete all your print jobs.
Here’s how you can do it:
- Open the Settings menu on your computer.
- Click on Devices.
- Select Printers & scanners.
- Choose your Epson ET 2650 printer, and click on Open queue.
- Right-click on a print job and click on Cancel.
Note: If you have multiple print jobs in the queue, you can perform this step for each file to stop them from printing.
One of the most common causes of your printing problems is a paper feed issue. Paper jams can wreak havoc with your printer.
They can detect if a piece of paper runs through the tray and decide to continue or cancel the print job depending on the situation of your paper tray.
Here’s how you can fix paper feed issues on your printer:
- Remove the paper by pulling it out slowly.
- Reload the sheet into the feeder.
- Slide the edge guide into the paper.
- Load more sheets to the tray to prevent jams.
Note: To minimize paper jams, you can fan out the sheets before placing them into the feeder tray.
If your printer runs out of ink, it’s understandable that it will stop printing.
An advantage if you have the Epson ET 2650 printer is that it’s an EcoTank machine that comes with a refillable ink tank.
You don’t have to worry about ink cartridges with this printer. When you discover that your printer has low ink levels, you can quickly refill the tank.
Here’s how you can do that:
- Go to your printer’s Setup menu.
- Select Maintenance, then Reset Ink Levels.
- Open the tank and remove the cap.
- Get your ink refill bottle and start refilling the tanks.
- Replace the cap and close the tank when done.
Tip: Make sure to refill the tanks up to the upper line, so your printer’s ink alert system works properly.
The Print Spooler Service is a piece of software that takes care of your print jobs. It’s the software that’s in charge of the communication between your computer and printer.
This service needs to be activated for your Epson printer to work properly.
Here’s how to activate your Print Spooler Service:
- Open the Service menu on your computer.
- Navigate to Print Spooler and double-click on it.
- Set the Startup type to Automatic.
- Make sure the Service status says Running.
Note: If you find out that it’s stopped, you can click on the Start button to activate it.
Your printer driver can directly affect your machine’s performance. An outdated driver can cause issues and stop your printer from working.
It can work fine one day and suddenly cause problems the next.
If you’ve tried all of the steps here and nothing seems to work, updating your printer’s driver will do the job.
Here’s how to do it:
- Go to the Epson website.
- Hover on the Support menu item, then click on Printers.
- Type in Epson ET-2650 on the search bar.
- Click on the Downloads tab.
- Download the printer driver and install it on your computer.
Note: Their website can detect your OS, so it automatically shows you the correct download for your system.
Additionally, you can also use different software to print your document. You can also try using another device as your current one is suffering from a connectivity issue.
If nothing else seems to work, you can contact Epson customer support for additional assistance.
Read Next: How to Fix Epson 00031 Error?
Now you know why my Epson ET 2650 won’t print, you can perform the necessary steps to fix it.
These are our surefire solutions, and they should help you get your printer back into working order.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.