If you don’t know what a Mitsubishi TV flashing green light means, in this post you will learn everything.
First, you will acquire a better understanding of Mitsubishi TV’s green light and then how to resolve the issue as soon as possible.
If your Mitsubishi TV flashes in green light and then stops, it means that a normal reset is going on. If the green light persists, however, then this means your TV has failed to boot. There is either something wrong with the TV’s power supply, external power source, or hardware.
Before we troubleshoot, let’s review the light behavior so you can understand exactly what’s happening.
It is good to consider the pattern your Mitsubishi TV’s LED is blinking in green.
As we’ve briefly mentioned above, different types of green light flashing could mean different things, so it is recommended to first inspect your TV before you troubleshoot.
Here are the only two possible green light patterns and what they mean:
In case the green LED on your Mitsubishi TV flashes in green color for several minutes or so and then stops, it means your TV is just going through a normal reset.
In situations like these, most of the time it means there is nothing wrong with your TV, but if there is, after all, it is probably related to the power flow or remote.
If the green light is flashing continuously then this means your Mitsubishi TV has failed to boot.
Most users have this issue in particular and it is possible for your TV to develop such behavior in case of insufficient power, software glitch, or hardware failure.
It is good to apply our solutions regardless of the way your green light is flashing because you cannot go wrong. Let’s get started!
The solutions below are designed to address each possible cause and hopefully, your issue will be gone before you reach the end of this post.
You should follow the solutions in order so you can avoid applying methods that are not necessary.
Tip: Observe the green light behavior after you’re ready with each of the solutions.
As we’ve stated in the reasoning above, temporal green light flashing could occur on your Mitsubishi TV if it is restarting.
In that regard, you need to identify if your TV is stuck in a boot loop.
In case you don’t know how to check, you can easily do that by pressing the power button on your TV’s remote several times at least.
This will turn your TV on/off, ensuring you that the device is not going through any kind of reset or reboot.
To turn OFF your TV, simply hold the power button for about 10 seconds, until the green light fades out.
Once done turn the TV on with a single press of the power button and check if it will be able to boot this time.
If Mitsubishi TV flashing green light, you can perform a power cycle to flush the electricity and renew it.
The power cycle is one of the most efficient methods when it comes down to TV boot issues so it’s worth trying.
To perform a power cycle, please follow the steps below:
- Turn off your TV by pressing the power button on your remote once.
- Unplug the power adapter of your TV from the power source.
- Wait for at least 3-5 minutes for best results at power cycling.
- Plug the power adapter back into the power source.
- Check if the light will still flash.
In case the issue is still there and your TV cannot start with the green light flickering, let’s move on to the next solution.
If your TV is plugged into a wall outlet power source, then perhaps this exact power source might be causing issues, making your TV unable to boot.
This will cause the LED on your TV to flash in green continuously until taken care of.
Our suggestion would be to choose a different wall outlet for your Mitsubishi TV for the rest of this guide.
It is good to plug it into a wall outlet that has another device plugged in before your TV.
This way you will make sure that the new wall outlet for your TV is 100% functional.
Pro Tip: While you’re still here, it is recommended to disconnect ALL devices & cables from your TV and reconnect them from scratch.
Then connect ONLY the power adapter and test if the TV will be able to boot.
Until now you have tried a solution against one of the most frequent causes and if your Mitsubishi TV is still flashing green light then there might be a software bug.
In that regard, you’re going to be applying several sequence troubleshooting steps and hopefully, the issue will be gone in a few minutes.
Note: Check if the green light is flashing after each of the minor steps.
It is strongly recommended to apply the steps one by one for best results:
- Press the reset button and hold for 10 seconds.
- Press the Power & Menu buttons together and hold for 20 seconds.
- Press the Display & Power buttons simultaneously and hold for 20 seconds.
- Check if any of the front panel buttons are being pushed inwards inthe ON position.
If your issue is still there after performing the general troubleshooting, then the problem is most likely related to the hardware. Before making any conclusions yet, let’s check what is the last option you’ve got.
Since you cannot be a hundred percent sure that the issue is hardware-related, we recommend reaching out to the Mitsubishi customer service.
They will definitely provide you with even more troubleshooting steps and hopefully, you won’t pay for a repeat.
Pro Tip: Don’t forget to mention what you’ve tried in this post to save both yourself and there’s time.
To fix the green light on your Mitsubishi TV, try rebooting and power cycling your TV, inspect the power adapter. Moreover, make sure that you’re using a trusted wall outlet and that your TV does not suck in a boot loop.
Read Next: How to Turn off TV without Remote?
Now that you know why is Mitsubishi TV flashing green light, you can easily fix the issue with our proven solutions.
If it turns out to be a hardware issue, then don’t lose any time and deliver your TV for a repair as soon as possible!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.