Lycamobile Not Registered on Network? – (08 Ways to Fix)

Are you getting the “LycaMobile not registered on network” error message?

If you see this error, it means you’re facing a connection problem. Either your SIM card is damaged or dirty, or there’s a network outage or congestion in your area.  

To get your LycaMobile phone to register to the network, choose it as your operator manually. You’ll also want to change the network mode if you’re in an area with poor coverage.

Okay, it’s time to delve into the solutions!

8 Surefire Ways to Fix LycaMobile Not Registered on Network

If you have trouble making calls, sending texts, or accessing the internet, don’t panic.

We listed eight simple and effective solutions to your Not Registered on Network problem. 

#1: Do Some Basic Troubleshooting Steps

Sometimes, minor glitches and errors on your phone are the main culprit for network-related problems.

The first thing you should do is do some basic troubleshooting steps, which include: 

• Restarting your phone
• Toggling the Airplane Mode
• Toggling your WiFi
• Switching your mobile data off
• Updating your phone’s software 

Note: Ensure you have a strong signal or WiFi connection. Weak signals often lead to connectivity issues.

#2: Check the Condition of Your SIM Card

A faulty SIM card will cause your phone to lose network connection, so check the condition of your SIM. Ensure it is clean, not damaged, and inserted properly. 

Here are the steps to check your SIM card:

1. Turn off your phone and remove the battery if applicable.
2. Locate the SIM card slot on your phone.
3. Gently eject the SIM card tray using a pin or ejector tool.
4. Take out your SIM card and inspect it for signs of damage. 
5. Clean the SIM card with a soft cloth or cotton swab dipped in rubbing alcohol. 
6. Reinsert the SIM card into the tray.
7. Align in properly with the notch and gold contacts facing down.
8. Push the tray back into the slot until it clicks into place. 
9. Reinsert the battery if you remove it and turn on your phone.  

Note: If your SIM card has cracks, chips, or scratches, replace it with a new one from LycaMobile.  

#3: Connect to LycaMobile Using the SIM Toolkit

The next solution is to connect your LycaMobile using the SIM toolkit app on your phone. Use the app to register your phone to LycaMobile’s network manually. 

To do this, follow these steps:

1. Go to Settings.
2. Select SIM, Tools, or Apps.
3. Search for Lyca Services or LycaMobile Services.
4. Go to LycaMobile.
5. Choose Mode.
6. Tap on Manual.
7. Select National.
8. Wait for a few seconds until you see a list of available networks.
9. Choose a network that matches your SIM and has a strong signal. 

If you don’t see the message “Registered on Network”, restart your phone or repeat the above steps. 

#4: Choose LycaMobile as Your Network Operator Manually

Sometimes, your phone automatically selects a different network that’s incompatible with LycaMobile, causing your Not Registered on Network LycaMobile problem.

To fix this, choose LycaMobile as your network operator manually.

Here’s how to do this:

iPhone

1. Go to Settings.
2. Tap on Mobile Data.
3. Choose Network Selection.
4. Turn off the toggle switch next to Automatic.
5. Wait for a few seconds until you see the list of available networks.
6. Tap on LycaMobile or something similar.
7. Wait again for a few seconds until you see Registered on Network.

Android

1. Go to Settings.
2. Tap on Connections.
3. Select Mobile Networks.
4. Tap Network Operators.
5. Tap on the option that says Select Manually.
6. Wait for a few seconds until you see the list of available networks.
7. Tap on LycaMobile or something similar.
8. Wait for a few seconds again until you see Registered on Network.

Tip: Check if LycaMobile has reliable coverage in your area and ensure you have a strong signal. 

#5: Change the Network Mode on Your Device

Another reason you see the Not Registered on Network message is your phone is set to a network mode not supported by LycaMobile’s network. To resolve this, you must change the network mode on your device.

Here are the steps:

iPhone

1. Go to Settings.
2. Tap on Mobile Data.
3. Tap Mobile Data Options.
4. Select Voice & Data.
5. Tap on 5G, 4G, or 3G, whichever matches your LycaMobile plan and coverage.

Android

1. Go to Settings.
2. Tap on Connections.
3. Tap Mobile Networks.
4. Select Network Mode.
5. Tap on 5G, 4G, 3G, or 2G, whichever matches your LycaMobile plan and coverage.

Note: If the selected mode doesn’t meet your needs, switch back to Automatic mode or use a different one that provides better performance or coverage.

#6: Update Your Phone’s Carrier Settings

Carrier settings contain information about your phone’s network provider, such as LycaMobile.

If they are outdated or incompatible with LycaMobile’s network, it will cause your phone to display the message “Not Registered on Network”. 

To resolve this, update your phone’s carrier setting by following these steps:

iPhone

1. Go to Settings.
2. Tap on General.
3. Select About.
4. Wait for a few seconds until you see the pop-up message: Carrier Settings Update.
5. Tap on Update to download and install the latest carrier settings for LycaMobile.

Android

1. Go to Settings.
2. Scroll down and select System or Software Update.
3. Tap on Carrier Settings or Network Settings to check for updates.
4. Wait for a few seconds until you see the pop-up message: Carrier Settings Update.
5. If an update is available, your phone will prompt you to download and install it. 
6. Follow the on-screen instructions to proceed with the update.

Before you do anything, you want to make sure that your phone is connected to your WiFi or mobile data.

Tip: Restart your phone to ensure the new settings will take effect. Then, verify any changes or improvements in your signal strength, data speed, or network-related settings.

7: Reset Your Network Settings

A corrupted or misconfigured network setting will cause your phone to display an error message. So, if you still have a LycaMobile SIM not registered on network problem, reset your network settings to fix it. 

Here are the steps to do this:

iPhone

1. Go to Settings.
2. Tap on General.
3. Select Reset.
4. Tap Reset Network Settings.
5. Enter your passcode if prompted.
6. Confirm your action by tapping Reset Network Settings again.
7. Wait for your phone to restart and reset its network settings.

Android

1. Go to Settings.
2. Tap on System.
3. Select Reset Options. 
4. Tap Reset WiFi, Mobile & Bluetooth.
5. Confirm your action by tapping Reset Settings.
6. Enter your PIN, pattern, or password if prompted.
7. Tap on Reset Settings again.
8. Wait for your phone to restart and reset its network settings. 

Pro Tip: Resetting your network settings will result in data loss. Ensure your WiFi passwords, VPN configurations, and cellular settings are backed up if needed.  

#8: Update Your Phone’s APN Settings

The eighth and final solution is to update your phone’s APN settings. APN stands for Access Point Name, which allows your phone to connect to LycaMobile’s service.

You will see the error if your phone’s APN settings are incorrect or incompatible with LycaMobile’s network.

To update your phone’s APN settings, follow these steps:

iPhone

1. Go to Settings.
2. Select Mobile Data.
3. Tap on Mobile Data Network.
4. Enter the following under the Mobile Data section:

• APN: data.lycamobile.co.uk
• Username: lmuk
• Password: plus

5. Enter the following under the MMS section:

• APN: data.lycamobile.co.uk
• Username: lmuk
• Password: plus
• MMSC: http://lyca.mmsmvno.com/mms/wapenc
• MMS Proxy: leave blank
• MMS US Prof URL: leave blank

6. Tap on the menu icon three lines in the upper left corner of the screen.
7. Select Save.

Android

1. Go to Settings.
2. Tap on Connections.
3. Select Mobile Networks. 
4. Tap Access Point Names.
5. Tap on the menu icon (three dots) in the upper right corner of the screen.
6. Select New APN.
7. Enter the following information:

• Name: LycaMobile UK
• APN: data.lycamobile.co.uk
• Proxy: leave blank
• Port: leave blank
• Username: lmuk
• Password: plus
• Server: leave blank
• MMSC: http://lyca.mmsmvno.com/mms/wapenc
• MMS Proxy: leave blank
• MMS Port: leave blank
• MCC: 234
• MNC: 26
• Authentication Type: PAP
• APN Type: default,supl,mms
• APN Protocol: IPv4/IPv6
• APN Roaming Protocol: IPv4/IPv6

8. Tap on the menu icon again.
9. Select Save.
10. Tap on the APN you just created and ensure you select it.   

Tip: Before making any changes, take a screenshot or note down your current APN settings so you will simply revert to it if needed. 

Quick Recap

Thus, if you encounter the LycaMobile not registered on network, it likely points to a connection issue. Check your signal strength and perform basic troubleshooting steps to fix it.

If this doesn’t work, update your phone’s carrier and APN settings. For more information about LycaMobile, visit our blog! 

Read Next: LycaMobile SIM Not Working? (Working Solutions!)