If you’re looking for a tutorial that’ll provide guidance on how to turn off picture in picture on DISH network, then this is for you!
Unlike all other tutorials, you’ll see online, our guide will give you the right step-by-step procedure in turning off Picture in Picture on DISH!
To turn off or disable Picture in Picture on the DISH network, press the PIP (Picture In Picture) button on the remote three (3) times when you see it pop up on your screen!
Before diving straight into the topic, do you know what Picture In Picture technology is? Let’s find out!
Picture-in-Picture or PIP for short is the technology that allows DISH subscribers to watch two (2) shows simultaneously by producing a small inset screen at the bottom part of the screen.
The audio of this secondary show is often muted as the main audio will come from the main show.
If you ever come across accidentally enabling or toggling it, what can you do? How do I turn off Picture In Picture on DISH network?
A lot of people aren’t actually sure how they can remove or turn off Picture-In-Picture from their DISH televisions.
So, to help you, we will be guiding you in turning it off or in deactivating whatever version of the remote you have!
Your DISH receiver’s remote control could vary depending on the type of receiver you’re using. But, there isn’t actually a specific type of remote that’s compatible with a receiver.
So, to identify which version of the DISH network remote you are using, check the box or the printed user guide that came with the receiver or the network.
In addition to that, you can also know the version of the remote you’re using by pressing [MENU] on the remote and going into System Info.
When you select System Info, you’ll be welcomed by a couple of information related to your receiver and remote.
There, you will see what the version of the current remote is that you’re using.
Once you’re certain of the specific remote version, you’re now ready to go to the next step, which is to learn how to deactivate or turn off Picture-In-Picture.
To turn off picture on your DISH network using the newest DISH remotes, follow these steps:
- Ensure that your remote has working batteries installed.
- Then, on the same remote, locate the Picture-In-Picture button (PIP).
- Press [PIP] once and you’ll notice that the PIP screen will be enlarged.
- Pressing the button again will project both shows side-by-side with each other.
- Finally, pressing it the third (3rd) time will close or turn it off.
Once done, you’ll see that your screen is now available again for normal or regular viewing.
For older remote versions or those that are version 4.0 and below, you can opt out of the Picture-In-Picture (PIP) mode by pressing [PIP] on the remote once.
Of course, given the fact that it’s already equipped with working batteries.
This is usually enough because the method to set it up is different compared to newer and more advanced DISH receiver remote control units.
So, before doing any of these two methods, the first step is, of course, to check the DISH remote version that you’re using. Then, depending on your remote, do any of these two processes accordingly.
Many users enjoy using the Picture-In-Picture (PIP) feature on the DISH network, but, what if it’s not turning off? What should you do in this regard?
To fix this, we have to first understand the reason why it’s not turning off, some of the reasons include the remote is not working properly or the receiver is not responding to commands any longer.
So, what do you do in this regard?
Step #1: Ensure That the Remote is Working
Enabling and disabling the Picture In Picture feature is done via the remote, therefore, if the remote is faulty and is not working as it should, then, you wouldn’t really be able to deactivate it.
So, make sure that your remote control is working and is functioning properly.
You can do this by:
- Check/replace the batteries of the remote
- Making sure that the buttons of the controller aren’t pressed
Step #2: Reset the DISH Receiver
The next step you want to try is to reset the DISH receiver.
If the dilemma is about the PIP being stuck and you aren’t able to deactivate/disable it, performing a reset can be the solution.
To reset your DISH receiver, follow these steps:
- On your remote, press [MENU] twice or [HOME] three times.
- Then, on the list of options, choose Receiver > Tools.
- After that, navigate and click Reset to Factory Defaults.
- Then, choose Reset Receiver to Factory Defaults.
- On the prompt, choose Yes asking if you want to Reset the Receiver to Default.
Step #3: Contact DISH Network’s Technical Team
Should these steps still be insufficient in your attempt to turn off or deactivate Picture-In-Picture (PIP), the next best thing to do is contact the customer department’s team.
Let them know about the fact that you’re unable to remove or get your DISH receiver out of the Picture-In-Picture mode.
Depending on their verdict, they either must perform technical troubleshooting physically or upgrade the current version of your DISH receiver.
To turn off or deactivate Multi-View or the Picture-In-Picture (PIP) on your DISH receiver, just press the PIP button and go through the modes until you get back to normal viewing. The number of times you must press it will depend on the remote you’re using.
Read Next: Why Is Dish DVR Not Playing Recorded Shows?
Many people like you are not well versed when it comes to their television sets and receivers.
Therefore, finding a guide on how to turn off Picture In Picture on the DISH network will be rare and difficult.
But, you’re lucky, because unlike other tutorials online, you wouldn’t be able to find one that is as detailed and as comprehensive as this!
So, the next time you think about finding the best and most appropriate solution to turning off Picture-In-Picture on your DISH receiver, you can go back to this guide!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.