Are you lost in trying to find a guide on how to retune Humax Freesat box? Can’t find the tutorial that’ll help you with it completely and comprehensively?
Today’s your lucky day because, in this article, we’ll give you the complete guide on how you can retune your Humax Freesat box!
If you’re looking to retune your Humax Freesat box, turn on your telly then initiate the retuning or the rescanning using your clicker!
Before we get to that any further, what’s the importance of doing a retune? Is retuning just for a specific set of people or is it for everybody?
Why Retune Your Humax Freesat Box?
Retuning is one of the most crucial activities you can do with your set-top box or recorder. In fact, it is seen as the ultimate solution if you’re experiencing too few problems.
Nevertheless, the following are the common reasons why you should retune your Humax Freesat box:
- There are missing channels from the network
- You want to discover new local channels
- You’re experiencing breaking up issues (snowy, broken pictures and images, etc.)
- The regional news channels are wrong
These are just some of the common mishaps that you could experience with your Humax Freesat box. If you’re experiencing one or more of these, retuning or rescanning could be the solution.
When Should You Retune?
As advised by experts and professionals, retuning should only be done when the weather conditions are pleasant.
Therefore, if there’s a storm, low-pressure area (LPA), hail, or snow, it’ll be bloody difficult and could actually do more harm than good as it can disrupt the retuning process.
In addition to that, retuning at least once (1) a month can help you with a lot of issues that could affect your experience. So, make it a habit to do it once (1) every month while the weather is pleasant.
So, what’s the process? Do I need any type of special equipment? How do I retune my Humax Freesat box?
How to Retune Humax Freesat Box – Steps
As we mentioned above, this guide will be comprehensive to the extent that we’ll cover everything. So, sit back, relax, and wait for the process to commence so that you can enjoy your favourite channels with your mates and your family members!
Step #1: Ensure That the Humax Clicker Has Batteries
Retuning and rescanning is a process that requires your Humax Freesat clicker. So, not having batteries in it could be the one that’ll slow the process down.
If you’re uncertain, install a new pair of batteries just to be sure.
Step #2: Turn the Telly On
After that, turn your television on together with the Humax Freesat Box connected to it.
Before retuning, make sure that your box is recognized by the telly.
Step #3: Initiate the Retuning
When everything is set, it’s time to initiate the retuning process. To do this, follow these simple and easy steps:
- On your Humax clicker, press [MENU] > Settings.
- From there, select Installation and press OK.
- Enter the password or 4-digit PIN.
- Then, select Default Setting, and enter the 4-digit PIN again.
Note: By default, the 4-digit PIN is [0-0-0-0]. If you didn’t change the PIN, this is what you have to input.
Step #4: Reboot Your Telly and Set-Top Box (STB)
Once the retuning is duly finished, all you have to do next is to reboot both the telly and the Humax Freesat box!
You can do this by removing both the telly and the recorder from power for about 15 to 30 seconds before plugging them back in again.
That’s it! This 4-step process is all that you need to know as regards retuning your Humax Freesat box!
In case you initially thought you need to be an expert to do it, you do not!
I’m Still Getting Problems, What Should I Do?
If, in the event, you’re still getting problems even after you did the process, what should you do? Right before you hop on that phone to ring Humax’s customer support team, try these troubleshooting steps out first:
Step #1. Remove the aerial connected to the set-top box (STB).
Step #2. Retune the telly without the aerial.
Step #3. Reset your set-top box:
- Go to [HOME] > Settings > System Settings.
- From there, select Factory Default.
- You may be prompted to enter a 4-digit PIN [0-0-0-0].
Step #4. Wait for the reset to finish, then, retune the telly.
Step #5. Lastly, insert the aerial back to the box and retune it one last time.
Should this process still fail to work, your next best bet is to contact the customer service department of Humax. Tell them about the dilemma, then, let them know about the processes you’ve done.
This is so that they’ll be able to give you a more accurate resolution faster and more urgently.
To retune your Humax Freesat box, go into settings, then initiate the retune or rescan. Refrain from doing it when the weather is not good because it can disrupt the process.
Read Next: How to Get More Channels on Freesat?
Bottom Line
A lot of people find it difficult to understand how to retune their Humax Freesat box. When, in reality, the process is simple, as well as easy to understand!
It’s so easy that you can do it even in less than 15 minutes! And unlike other guides you’ll see online, our tutorial is simple, easy, and is not requiring you to be an expert about it!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.