If you’re wondering how to reset Honeywell Thermostat WiFi, the issue can be resolved through your smartphone or by manually resetting the thermostat itself. The Wi-Fi connection can be reset in several ways.
The easiest way is to reset the thermostat through the Honeywell Home app. Naturally, you can also reset the Wi-Fi by completely restarting the thermostat.
Furthermore, you can perform a hard factory reset, which resets all of the software to out-of-the-box conditions.
At any rate, a loss of wireless connectivity means a user can’t control the temperature settings in their home.
If you are experiencing issues with how to reset wifi on Honeywell thermostat, consider the following troubleshooting methods.
How to Reset Honeywell Thermostat WiFi: Factory Reset Procedure
One way to reset your Honeywell Thermostat’s Wi-Fi is to perform a factory reset. As with other devices, a factory reset wipes out any previous configurations you have already made.
However, a factory reset reinitiates the wireless connection procedure, which is automatic.
After a factory reset, you will need to manually configure temperature settings and wireless credentials.
To perform the factory reset procedure, use the following steps:
- Press the Menu button.
- Select the Advanced menu option.
- Using the arrows, select Advanced Reset.
- Select the Factory Reset icon.
- Select the confirmation prompt.
After performing a factory reset, it is important to wait for at least one minute before attempting to configure it.
Presuming you don’t have any issues with your wireless router, you should be able to connect it to Wi-Fi.
How to Reset Honeywell WiFi Thermostat
You can use a manual reset procedure by pressing the buttons on your thermostat.
This method only helps your smartphone or tablet to connect directly with the thermostat, as opposed to connecting to it through your wireless router.
If, after using this procedure, you cannot see the thermostat’s wireless network, you will need to enter its IP (Internet Protocol) address in order to access the web interface. Its default IP address is 192.168.1.1.
To manually reset the Wi-Fi on your thermostat by physically pressing its buttons and configuring it via the web interface, use the following steps:
- Press the fan and up arrows on the panel.
- Hold both buttons down together.
- Press the Next button until the panel reads 39.
- Press the down button and then the done option.
- On your phone, select the Honeywell wireless network.
Note: After a successful reset, by using the Settings menu on your phone, you can see a new wireless network titled New Thermostat.
Once connected, you can connect to the Honeywell thermostat’s web interface for further configuration.
Using the Honeywell Home App to Reset the Thermostat’s Wi-Fi
You may not need to reset the actual thermostat device by performing a factory reset.
Instead, if you have installed the Honeywell Home app, you can reset the Wi-Fi connection through the application’s software.
To reset the Wi-Fi without a hard factory reset, use the following steps:
- Download and install the Honeywell Home app.
- Enter your login credentials.
- Select the Settings menu.
- Select the Reset Wi-Fi option.
- Reconnect the thermostat with your Wi-Fi password.
Also, be aware that your smartphone should be connected to the wireless LAN. Otherwise, your phone and the thermostat will not be able to communicate.
You may need to reconnect your phone to the wireless signal to establish a successful connection.
Adding a New Device via Your App
During the first installation procedure with the Honeywell Home app, a user must first add a new device.
If you cannot connect to the Honeywell thermostat via your app, you can once again choose the add a new device option to solve connectivity problems.
Even if you cannot access your Honeywell thermostat through your smartphone, it doesn’t necessarily mean that the thermostat is malfunctioning.
Instead, the Honeywell Home app may simply need to re-establish a wireless connection with the thermostat through your wireless home connection.
This method doesn’t turn off the thermostat; rather, it simply reconnects the thermostat to the software on your smartphone.
What to Do after Resetting Your Honeywell Thermostat’s Wi-Fi if it Still Doesn’t Work
If you have reset your Honeywell thermostat’s Wi-Fi and are still experiencing issues, the thermostat may not be the problem.
If a reset procedure fails to reset the Wi-Fi or reboot the thermostat, you can still reboot the thermostat by turning off the breaker.
However, be aware that any other devices drawing power from the breaker will shut off as well.
If you have reset the Wi-Fi and the thermostat is still not functioning correctly, the root cause could be your furnace or air conditioning system.
Rebooting Your Wireless Router
The root cause may not be the thermostat device itself. The issue may be your wireless router.
The thermostat module is connected through your wireless router’s LAN. To troubleshoot the thermostat’s wireless connection, you can try to restore the connection by rebooting your router.
There are multiple ways to reboot your wireless router. One method is to log in to the wireless router’s web interface and choose the reboot option via the software.
In addition, note that most people find it easier to power-cycle the router by removing and reconnecting its power cord.
When you reboot your wireless router by unplugging the power, it is important to wait at least one minute before plugging the power cable in again.
After the wireless router has fully booted, your Honeywell Thermostat Wi-Fi connection may be automatically restored.
Wireless Interference
Your Honeywell thermostat’s wireless connectivity may also be affected by interference, which is common among wireless devices. Microwaves and other devices that send radio signals can disrupt a successful connection.
Moving your thermostat would mitigate wireless interference, though it would likely be easier to move the source of radio signal interference (baby monitors, handheld radio devices, etc.).
If interference is the root cause, resetting the thermostat will not solve connectivity issues.
Read Next: Why Is My Honeywell Thermostat Heat Not Working On Auto?
Bottom Line
An effective way for knowing how to reset Honeywell thermostat WiFi is by a factory reset. However, a factory reset may not reestablish a wireless connection if you have configuration issues on your wireless router.
Additionally, note that if you can’t see your thermostat in the Honeywell Home app, it doesn’t always mean that the thermostat lacks a wireless connection.
You may only need to choose the add a new device option to reconnect the thermostat to your phone’s app.
If, however, you see the Wi-Fi SIGNAL LOST alert at the top of your thermostat’s LCD panel, it means that the thermostat can’t connect to the wireless router.
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.