How to Remove Setup Wizard Verizon?

Wondering how to remove setup wizard Verizon? Well, remain with us through this guide!

We know how bothersome it is to get constantly reminded by the setup wizard on your phone, even after completing the setup once.

Well, in this guide, we will unwrap ways for bypassing, completely resolving, or correctly carrying out the Verizon cellular setup wizard.

The setup wizard on your new Verizon device could either be caused by an issue with your device’s SIM card, or a problem with the network settings.

The issue can often be fixed by rebooting your device or simply completing the steps of the setup wizard.

Let’s learn more about the cellular settings environment on your Verizon device!

About Verizon Setup Wizard On Mobile!

The Verizon cellular activation setup wizard must be completed every time you connect a new mobile device to your service.

Inserting the Verizon SIM card into your brand-new mobile device will automatically upload a necessary cellular update that you must complete the setup for.

Here are some of the reasons why you can’t remove the setup wizard:

There’s an issue with your Verizon subscription
A temporal powering/charging problem with your device
An issue with the inserted Verizon SIM card
A problem with the software settings of your phone
A software conflict with an activated software settings

Note: If you’re not allowed to complete the setup, make sure you’ve inserted the SIM card first!

Do I Have to Complete the Verizon Setup Wizard?

The Verizon cellular setup wizard is only available on new mobile devices purchased from the carrier and once a SIM card is inserted, the setup wizard will occur.

The steps, instructions, and details you must get familiar with and complete during the setup, are mandatory, not optional.

Can You Deactivate Verizon Setup Wizard?

Verizon’s setup wizard can be either bypassed from the settings of your phone or just by completing it.

The most efficient way to remove the bothersome notification at the top of your settings tab is to just complete the pending steps to initialize the cellular on your device.

How to Remove Setup Wizard Verizon – 6 Working Methods!

Tip: To resolve your issue faster, follow our steps in chronological order!

1. Complete the Verizon Setup Correctly

The easiest way to remove the setup wizard on your Verizon mobile device is if you simply go through the required prompts.

The setup will guide you through some essential steps and instructions on how to operate the network settings of your device and create a backup.

How to Complete Verizon Setup On Android?

Sign in using your Google account password on your Android device.
Turn on your new phone and go to Settings > Cellular to start the setup.
Check if you have pending setup instructions that must be completed.

How to Complete Verizon Setup On iOS?

Launch the settings of your iPhone device.
Press “Finish Setting Up Cellular” at the top.
Complete the instructions to set up your e-sim.

Note: Once the cellular setup has started, there will be on-screen setup instructions.

2. Reboot your Mobile Device

If you’ve already completed the cellular setup wizard but it still appears as if there are still steps left to be completed, rebooting your device is the best solution.

That will quickly resolve all issues with the cellular setup wizard on your Verizon device and remove all related notifications.

Press the power button of your mobile device and select the “Restart” option!

Note: To take the troubleshooting one step further, we recommend to “Shutdown” your mobile, and wait for a few seconds before rebooting to perform a power circulation.

3. Deactivate “Auto-Sync” – ”Contacts”

You could deactivate the pending setup wizard on your brand-new Verizon device by stopping a particular option in the settings.

On both iOS and Android, you could hide the pending cellular setup wizard by turning off either “Auto-Sync” on Android or “Contacts” on iOS.

How to Turn Off “Auto-Sync” On Android Devices?

Head into the Settings of your Android device.
Press on the search field once to start typing.
Insert “Auto-Sync” and press the “Search” button.
Select the first tab that will appear on your screen.
Press the activation slider to turn off the feature.

How to Turn Off “Contacts” On iOS Devices?

Go to the Settings of your iPhone/iPad.
Head into the iCloud settings tab next.
Scroll down and press “Contacts”.
Choose the “Deactivate” button to turn it off.
Check if the pending setup wizard is still there.

Tip: Reboot your device once you’ve deactivated the feature to erase the setup wizard.

4. Reinsert the Verizon SIM Card

Another cause for the setup wizard issue with Verizon is that the SIM card of your new mobile device isn’t inserted correctly.

To make sure everything with the microchip placement is correct, you shall take it out of your phone and place it back in correctly.

Here’s how to remove the setup wizard Verizon by reinserting the SIM:

Find a SIM instrument that allows ejecting of SIM cards.
Insert the SIM tool into the pinhole above the SIM port.
Take out the cardholder of your new mobile device.
Remove the SIM card from the cardholder and wait.
(Optional) Clean the cardholder out of any dust/debris.
Place the Verizon SIM card back into the cardholder.
Insert the SIM into your mobile device’s SIM tray.
Check if you’re able to complete the Verizon cellular setup.

Note: Your mobile device will be connected to a service for 15-20 seconds after insertion!

5. Verify your Subscription Status

It is mandatory to remain subscribed to Verizon while performing the necessary cellular setup wizard on your new mobile device.

If you didn’t pay at the end of your Verizon billing cycle, it is likely that your account and SIM card got temporarily suspended from all benefits.

How to Check Verizon Subscription?

From a web browser sign in to “My Verizon”.
Navigate to the “Account” tab and go to “Manage”.
From the “Billing” tab press on the “Manage” button.
Press “Payment Method” > “Change” and check the info.

Alert: Make sure that the correct payment info is filled up in the credential fields.

Transaction Not Going Through?

There’s a fund insufficiency in the associated bank account’s balance
The payment info is correct and your debit/credit card wasn’t found
There’s a temporal restriction, laid on your Verizon account

Tip: It’s best to contact Verizon directly for questions associated with the subscription!

6. Reset the Device’s Network Settings!

The fault may potentially have something to do with incorrect network settings enlisted on your mobile device.

If the network settings do not answer the Verizon SIM card’s requirements, you may be unable to complete the cellular setup wizard.

Resetting the network settings will erase WiFi, Bluetooth, and Cellular data!

How to Reset Network Settings (Android)

Enter the Settings of your mobile Android device.
Access the “Network” tab by scrolling down.
Press on “Reset Network Settings” next.
Complete the instructions displayed on the screen.

How to Reset Network Settings (iOS)

Launch the Settings app on your iOS device.
Enter the General tab and scroll down to “Reset”.
Press on “Reset Network Settings” and follow the steps.

Note: All data erased by the network settings reset cannot be recovered!

How to Get Rid of Setup Wizard Notification On Verizon?

If you’re constantly getting notifications on the lock screen of your mobile device associated with the pending setup wizard, there’s a way to fix the problem quickly.

Until the setup has not been completed or the notifications deactivated, you will receive reminders of the pending setup.

Let’s learn how to deactivate the notifications on both Android and iOS!

How to Deactivate Notifications On Android?

Launch the “Settings” application of your Android device.
Navigate into the “Setup” tab by pressing the button at the top.
Go to the “Apps & Notifications” page on your device next.
Press on “All Apps” and choose “Show System Apps”.
Locate the “Android Setup” app and choose “Disable”.

How to Deactivate Notifications On iOS?

Go to the Settings of your iOS device.
Scroll down and enter the apps section.
Locate “Verizon” from the list and select it.
Choose the “Deactivate Notifications” button.
Exit the settings tab and check if the notifications are there.

Note: Turning off “Contacts” and “Auto-Sync” on Android/iPhone also stops the notifications sent by Verizon’s setup wizard indefinitely.

Quick Recap:

In this guide, we’ve learned how to remove setup wizard Verizon, and we know that it’s best to either complete the setup or turn off “Auto-Sync” (for Android) and “Contacts” on iCloud (for iOS devices).

If the issue is still there, reset the device’s network settings! Follow our blog for more technical troubleshooting info!

Finn Wheatley

Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.

How to Remove Setup Wizard Verizon? – (Best Ways!)