If you know how to disconnect someone from Bluetooth speaker, you don’t have to be annoyed when they access your device without permission.
Now, you can maintain control of your home and enjoy a pleasurable listening experience.
There’s only one sure way to prevent someone from connecting to your Bluetooth speaker. Press and hold the Bluetooth button for about 5 seconds to force your speaker into pairing mode. Then, connect to it from your phone before you lose it to whoever took it over in the first place.
To avoid the issue, you can also prevent someone from connecting to your Bluetooth speakers by placing a security code, turning it off when you’re not using it, and switching off visibility.
You can also buy a more advanced speaker that gives you more control over which device connects to them.
Like other Bluetooth devices, your speaker can be hacked. The technology itself has provided us with comfort, but it also exposes us to cyber attacks.
Disconnect anybody who connects to your Bluetooth speaker without your permission to avoid these vulnerabilities and enjoy a good listening experience.
Your Bluetooth speaker can also become an entry point for hackers where they can try to attempt to gain access to your smartphone.
Bluetooth speakers allow you to listen to your favorite music. Thus, it can be annoying if you can’t because someone already jacked into your device and decided to play their preferred tracks.
During these situations, you ask yourself how to disconnect someone from my Bluetooth speaker.
Bluetooth speakers feature a pairing mode, which is required for their initial setup.
If your device does not have a Bluetooth button, look through the user manual to find a way to initiate pairing mode.
- Look for the Bluetooth button on your device.
- Press and hold the button for 5 seconds until you see the LED light flash.
- Connect to your speaker from your phone.
We recommend you try this first before you go full-on factory reset mode.
Almost all Bluetooth speakers have a means to factory reset. This erases all paired devices and lets you start from scratch, making it a sure way to disconnect everyone from your device.
The commands to reset your Bluetooth speaker depend on the manufacturer.
- Power the Bluetooth speaker down.
- Make sure all devices are disconnected from the speaker.
- Press and hold the Bluetooth button and the Power button for up to 15 seconds.
- Pair your device as you would a new speaker.
- Don’t unpair unless you power it down.
Note: Some Bluetooth speakers have no Bluetooth button. Instead, hold up the Volume Up and Power button for 15 seconds.
An effective way to disconnect someone from your Bluetooth speaker is to use a wired connection. There’s a good chance that your speaker comes with an audio jack that you can use.
If you’re connecting this way, the speaker will prioritize it over other connections.
You will need a male-to-male aux cable to get this to work.
Here’s how to use a wired connection on your Bluetooth speaker:
- Get a 3.5mm aux cable.
- Connect one end to your phone.
- Connect the other to your speaker.
Note: If your phone does not have a 3.5mm audio jack, you’ll have to get an adapter so you can plug the other end into your phone.
If you want to prevent anyone from connecting to your Bluetooth speakers, hide them from other users.
Some speakers have a dedicated button for this function. Of course, they are more expensive, but they also provide superior audio quality.
This advanced security measure requires a code to implement, and only advanced speakers have this feature.
You can set your device to connect only to those with a specific connection key. Set any four digit code so that your speaker will request the code before pairing.
If someone untrustworthy has your code, change it to stop them from accessing your speaker.
Note: You can also use additional re-authentication, such as a fingerprint scanner, to keep off anyone who knows you well and can easily guess your code.
If you are sure that your Bluetooth speaker can only pair with a single device, simply make sure to always keep your phone and speakers paired. Most Bluetooth speakers will refuse to pair if they are already linked.
This way, you will not have to deal with the issue of disconnecting someone from it.
You need to remember with this option that turning the Bluetooth on your phone can use quite a bit of extra power. It might affect your phone’s battery life.
Make sure that you have a battery pack with you, so your phone won’t run out of juice in the middle of the day.
Here are some of the things you need to consider when doing this:
- Your smartphone has excellent battery life.
- You have an external battery pack in case of emergency.
Most Bluetooth speakers come with their firmware. This is one way that manufacturers can update their devices even after you have bought them.
Issues like disconnecting an unwanted device from your Bluetooth speaker are likely one of the added features you can get with a firmware upgrade.
Depending on the brand of speakers you have, there are a few ways to update their firmware and enjoy a much improved listening and security experience.
Here are the general steps that you should take to update your speaker’s firmware:
- Check if your speaker comes with a smartphone app.
- Download the app from the app store.
- Launch the app, and you should be able to identify your speaker.
- If updates are available, it should prompt you to download and install them.
- Wait for it to finish installing. Your speaker might restart at this point.
Note: Not all speaker brands come with their apps. However, most brands have them and will make it easy for you to update its firmware.
To disconnect anyone using your Bluetooth speakers, force your device into pairing mode. All you have to do is press and hold the Logo button for about five seconds or until the LED light flashes, signaling it’s ready for pairing. Then, connect to your device quickly before anyone else does.
Read Next: Can Firestick Connect to Bluetooth Speakers?
If you don’t know how to disconnect someone from Bluetooth speaker and ruin your listening experience, now you have a great idea of how to do that.
It’s mischievous and dangerous at the same time as it exposes you and your other devices.
It’s essential that kick out unwanted connections as soon as you find them and work on ways to prevent them in the future. This post will help you determine what to do in case this happens to you.
In cases that you have tried these steps and they don’t seem to work, it might be best to contact your Bluetooth speaker’s technical support team as they will be equipped to help you better.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.