You’re probably wondering the best ways on how to connect Denon receiver to WiFi.
It can be frustrating when you’re not able to enjoy or fully utilize all features of your Denon receiver because you don’t know how to connect it to WiFi.
Let’s go through the procedure!
Denon is an AV/AVR device and can be connected to a network either using a wired LAN (Ethernet cable) connection or through a wireless (WiFi) communication. You can connect it to WiFi using the scanning network (DHCP) method, using your iOS device, using a WPS Router, or Manually (Static IP).
No matter which model of Denon you are using, if you have not been able to connect it to your WiFi, there’s no need for hassle.
I got you covered. We’ll go through a few methods you can use to connect your Denon receiver to WiFi.
How To Connect Denon Receiver to WiFi? – Best Methods
Here are some of the best methods for connecting your Denon receiver to a WiFi network:
Method #1: Scanning Network Method
This method works for Denon receivers with wireless network capability. These receivers contain external WiFi/Bluetooth antennas that are connected to the rear panel.
You should ensure they’re oriented in their full upright position. Ensure your AVR is also connected to your display through the HDMI cable.
With the AVR and your WiFi connection on:
- Tap the “Setup” button on your remote control.
- Go to “Network” from the menu options.
- select “Connection” > “WiFi Setup”.
- From the WiFi setup menu, select “Scan Network.”
- Select the network you wish to connect to from the list of available networks.
- Follow the prompts to completion.
Method #2: Connecting to WiFi Through a Bridge
If pulling a hard-wired connection to your router from your Denon receiver is not possible, you can try using a WiFi bridge.
There are many available in the market that will undoubtedly suit your receiver.
To connect one:
- Ensure you have your router already configured and working.
- Plug in your ethernet cable to the network port on your Denon receiver.
- Connect the other end of the cable to one of the LAN ports in your bridge.
To set up your bridge
- Log into your bridge’s quick setup page using Its given IP address.
- Input your credentials and follow the setup wizard to completion
Method #3: Connecting Via a USB WiFi Adapter
In case your receiver does not have wireless network capabilities.
You can still connect your receiver to your wireless home network using WiFi USB Adapter. These are available for purchase from any tech store.
To carry out the procedure:
- Ensure your receiver and the wireless network is on.
- Plugin the WiFi USB adapter into the port on your display.
- An on-screen prompt should appear on the screen.
- Select the “Wizard Setup” to proceed.
- Choose your WiFi network and click on “Next.”
- Enter your WiFi password and Select Save.
Using the WiFi network on your screen, you will be able to utilize your Denon to play from that particular device.
Method #4: Connecting Via the HEOS App
For newer Denon models powered by HEOS, you can set up your receiver using the HEOS app.
You can download the app from the google play store or the app store.
To set up your Denon device:
- Go to the Music tab on your HEOS app homepage and tap on the Settings icon.
- Click on Add a device. This launches a setup wizard that you can follow.
- Connect your audio input jack from your device to the back of the receiver/speaker.
- Press the connect button at the back of your receiver/speaker. The light will blink green.
- Click next on your app when the green light stops blinking.
- Input your WiFi password in the space provided.
- Save and complete the setup. You can also rename your device from here.
Method #5: Connecting to the Network Via Ethernet
If a WiFi connection is impossible, you can use a hard-wired ethernet connection to connect your receiver to the internet.
It is the primary method of connection to the internet for your Denon receiver. All you will need is a CAT5/CAT6 ethernet cable and RJ11 clips.
- Ensure the ethernet cable is connected to one of the LAN ports of your router.
- Connect the other end to the network port at the back of your Denon receiver.
Tip: It does not require any additional settings.
Method #6: Try Bluetooth Pairing
If all else fails, you can still try connecting to your Denon device via Bluetooth.
It may offer less functionality than a WiFi connection, but the basic controls are still available.
- Change the input mode to Bluetooth.
- Hold the option button for 3 seconds to enable pairing mode.
- Select the name of your Denon device on the device you are trying to pair with.
- Ensure the number displayed in your receiver is the same as that on the other device.
- Tap on Pair and wait for a few seconds.
- Hit enter on the Denon receiver to complete.
After successful pairing, you can start playing music on your device.
If Your Denon Receiver Does Not Connect to WiFi?
If you are trying to connect your Denon receiver to a WiFi network, but it develops a fault, you can use these troubleshooting techniques:
Check Your Connection
Before performing any troubleshooting on your Denon, ensure your home networking is working correctly. Lousy connections often result in your Denon not working as intended.
Files may fail to load, the audio quality might be terrible, and some speakers may even fail to connect, ruining the whole Denon experience.
Confirming your connection will save you a lot of time.
Use a Legacy Denon Receiver
Another reason your Denon could be failing to connect to your home network is that it is an outdated model.
The WiFi feature has only been recently implemented. Recent WiFi protocols may not be supported by your receiver.
This may be a major cause of the problems you are encountering.
Reboot Your Device
The misconnection might be a temporary problem that can be easily fixed by performing a full power cycle.
You can reboot the network module on your receiver in the following way:
Note: These methods apply to the AVR-X1100 version or higher.
1. Switch the device to the source ONLINE MUSIC.
2. Press the keys appropriate for your particular model.
- X3100W/ AVR X1100W / X2100W
Hold the “DIMMER” and the “ZONE2 SOURCE” buttons simultaneously for 3 seconds.
- AVR X1200W /X2300W/ X1300W/ X3200W/ X2200W / X3300W
Hold the “TUNER PRESET CH -” and “TUNER PRESET CH +” buttons together for a minimum of 3 seconds.
- AVR X4100W / X7200W / X5200W
Press the “DIMMER” and the “left arrow ” button under the front flap buttons together for at least 3 seconds.
- X7200WA /AVR X4200W / X6200W
Hold the “DIMMER” and the “SETUP” buttons on the receiver simultaneously for 3 seconds.
3. On pressing the right keys, “Initialize” will appear on the front display.
Note: If you’re using a HEOS -powered Denon device, see the user manual for the appropriate procedure.
A total power down can also be achieved by unplugging your device.
Read Next: Denon Receiver HDMI Output Not Working?
Final Thoughts
Having gone through the various methods of how to connect Denon receiver to WiFi, I now believe that you will be able to troubleshoot any problem you face with your Denon receiver.
There is a large community that also provides several off-brand troubleshooting procedures online.
If your problem persists, be sure to contact Denon customer support.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites. Check out more about him here.