Have you been asking yourself, how many AT&T U-verse wireless receivers can I have? Well, you are in the right place. AT&T U-verse has completely revolutionized the entertainment industry.
Customers have access to a wide variety of programs and picture-in-picture channel browsing, parental controls, fast channel changing, and video-on-demand.
User experience is therefore enhanced and elevates the customers’ entertainment experience.
You can have up to three wireless receivers connected on a single connection. Therefore, you have access to two additional wireless receivers.
Why You May Need More Than One AT&T U-Verse Receiver
Looking for reliable internet service providers is no easy feat. The main concern is usually, the strength and reliability of the network. This makes you wonder, how many wireless receivers can you have with U-verse?
Have you ever thought of having more than one AT$T U-Verse receivers? If the thought has ever crossed your mind, here’s even more reason why you should make that decision.
Some of the reasons include:
1. Record More than One TV Show at Once
When you have just one AT&T U-Verse receiver, you are only limited to recording one show.
This means that if there is more than one show running concurrently, you will have to miss out on one. Luckily, with more receivers, you get to record all your favorite content.
2. Access More Live Shows at Once
If you are in a big family where you all have different tastes in shows, some may miss out on their favorite shows if they air at the same time.
With more receivers at your disposal, you can access more content.
3. View High-quality Content on Different Devices
With one receiver and multiple people streaming from it, the quality of content may be diminished. However, with more receivers, you can maintain the quality of streamed content.
Note: You are only required to connect a maximum of three wireless receivers when using a single connection at any given point.
Going beyond the set limit compromises the quality of the internet.
How to Connect your U-Verse Wireless Receiver to Your TV
How many AT&T U-verse can I have? Overcrowding causes the wireless receiver to malfunction. Therefore, only a finite number of connections are allowed at any given time.
Whenever you exceed the recommended number of connections, the user experience changes drastically.
This may, at times, cause your TV to lose its connection. The methods listed below can help you recover the connection and make it stronger.
Instructions Using HDMI Cable
When getting your AT&T subscription, you get one wireless receiver that you can ideally use on your main TV.
The AT&T U-verse Wireless receiver setup is quite simple; the services of an expert are not required in this regard.
The wireless router helps declutter your TV console. There are no wires involved, thus reducing instances of faulty wires. If you need additional receivers, you will have to get in touch with the AT&T support department for further assistance.
The support team will help you get the appropriate wireless receiver. The wireless receiver should be able to integrate seamlessly with your system. Therefore, this makes it easier to link with your devices.
One that will be able to solve the conundrum of how many AT&T U-verse can I have?
Steps:
Step #1: Using an HDMI cable, link the receiver to the TV. Alternatively, component or coaxial cables can also serve the same purpose.
Step #2: Turn on your TV.
Step #3: Select the HDMI connection type using your remote control. This function is found at the source or input screen display.
Step #4: Plug the wireless receiver into a power outlet. The receiver powers automatically.
Step #5: Give it a couple of minutes; you will then receive relevant information on how to complete the setup. Once this is complete, you will be able to establish a reliable connection.
Instructions Using an Existing WAP
Steps:
Step #1: To the existing WAP pair a new wireless receiver
Step #2: Prompt the WPS button, then press the OK button. This causes the devices to pair.
Step #3: check for the three green LED bars displayed on your receiver. The green light is a clear indication that the devices have paired successfully.
Instructions Using a New WAP
When replacing your WAP, you require connecting it with any existing wireless receivers with the new WAP.
Steps:
Step #1: Press and hold the power button for 10 seconds. This will restart the receiver.
Step #2: Ensure the LED green bars on the wireless receiver are on. The green LED light on the receiver indicates that you have successfully paired.
However, it may take up a bit of time for live TV to appear. Give it a bit of time before connecting your device.
Can My Additional AT&T U-Verse Receiver Fail To Connect To My TV?
Sometimes, even with additional receivers, your TV may give you connection problems.
If you have given all the above methods a try and your wireless receiver is still not working, then it means there are other underlying problems and you need to troubleshoot.
To adjust, you can try some of the following steps:
Reboot Your Receiver
If your TV is unable to display images, it could be due to connection issues, power or signal strength issues. Reboot your device and try connecting again.
Connect Your Receiver with An Ethernet Cable
In some instances, the connection may be lost because there is signal interference. Try connecting your receiver directly to the router using an ethernet cable.
Disconnecting your wireless receiver and relocating it closer to the WAP will help you establish a stronger connection. Wait for the devices to pair, then relocate the wireless receiver once more to your preferred location.
Read Next: Do AT&T Report to Credit Bureau?
Conclusion
Ensuring that you establish a strong and reliable connection on your TV is essential.
This is because you can experience uninterrupted entertainment. You also get the chance to appreciate the worth of your money. You must get to utilize all the features provided by your service provider.
Are you still asking yourself, how many AT&T U-verse wireless receivers can I have? The above methods will help you bypass any connection issues with your wireless receiver that you may experience along the way.
They are quick fixes that do not require the technical expertise of any technician.
Moreover, the internet speed tester is an elaborate tool at your disposal, as it helps you determine the strength of your connection. This will help you avoid any inconveniences.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites. Check out more about him here.