Eero Pro 6 Overheating? (Fix & Prevent Damage)

The Eero pro 6 overheating is not a good sign. Luckily, there are many things you can do!

Like any networking device, when Eero Pro 6 is overheating, the unit’s protective mechanism will automatically reboot the device to prevent heat damage.

When this happens, the internet will go down until the eero reboots, causing constant disconnects or internet inconsistency.

To prevent Eero Pro 6 from overheating, most importantly, prevent direct sunlight and clean the ventilation openings. You must also control the room’s temperature, relocate your eero to an open location, and reduce the utilization.

To unwrap how all of this is done quickly, continue reading…

Why is Eero Pro Overheating Constantly?

There are many reasons for Eero Pro 6 to overheat.

The possible culprits may vary from bad ventilation to high room temperature and suffocation.

So, we’ve prepared a straightforward list that contains all possible causes for overheating on Eero devices that we’ll troubleshoot later.

Here’s everything that can cause Eero Pro 6 to overheat:

In the next section of this guide, we’ll pay close attention to the causes of overheating that we have listed above.

So, without further ado, let’s try to stop Eero Pro 6 from overheating at once.

How to Fix the Eero Pro 6 Overheating in Easy Steps?

Tip: Follow the overheating measures in chronological order!

1. Provide Sufficient Ventilation

The first and crucial step that you should undertake is to provide your eero Pro 6 with good ventilation and avoid sophisticated places. 

For instance, your eero Pro 6 must not be set up in a closed compartment, covered by blankets, or near electrical appliances.

Some devices are considered “heat conductors,” if your eero 6 Pro is behind a monitor, TV, or other heat-emitting appliance, the internal temperatures will rise.

So here are some excellent recommendations to place your eero Pro 6:

• On a shelf, away from heat conductors.
• In front of the TV, and not behind the TV.
• On a specialized shelf hung on your wall.
• Not too close to the floor or the ceiling.

This is important because if your eero is high in your room, near the ceiling, the heat from the room goes up hence more warmth reaches your eero. 

So, the best position for your eero 6 pro regarding elevation should be somewhere between the floor and the ceiling of your room.

2. Clean Eero’s Vent Openings

The Eero Pro 6 ventilation openings are located on the back of the device above the ports, so you must ensure the airflow can reach them easily.

When the vents are obstructed by dust, your Eero Pro 6 won’t be able to cool down effectively, so cleaning them thoroughly is highly recommended.

Here’s how to clean your Eero Pro 6 vents effectively:

1. Important: Turn off your eero Pro 6.
2. Acquire a toothpick and an ear stick.
3. Use the toothpick to scrub all the dust.
4. With the ear pick, collect all this dust.
5. Optional: Use a vacuum to collect all.

If you have a can of compressed air, that would be an excellent opportunity to blow into the vents to free up the airflow passage.

When the vents are free of dust, ensure to position your eero in a way that allows airflow to freely pass through the vents, instead of obstructing them.

Warning: Avoid using any liquids for cleaning your eero Pro 6.

3. Lower the Room Temperature

The room’s temperature is the most significant factor that influences the hardware temperature of your devices, including the Eero Pro 6.

When it’s too hot in the eero’s room, combined with other factors, the hardware temperature may exceed the thermal margin and start overheating.

So if you feel it’s too hot in the room (especially during the summer), we recommend turning on your AC or relocating it near a window.

If none of these approaches are suitable for your situation, continue reading…

4. Elevate your eero’s Position

Another conventional but highly effective way to reduce your eero’s internal temperature is by elevating the device off the surface. 

Yes, as simple as this sounds, this will help you prevent your Eero Pro 6 from overheating in a matter of minutes.

Let us explain…

When your eero is positioned on a wooden surface (in most cases), the heat beneath the device is trapped underneath.

When combined with the newly produced heat, this will cause your eero to overheat, and the solution would be to use a cardboard box and position the eero on top of it.

For instance, you can use an empty pack of cigarettes, a matchbox, or anything with a surface area less than your Eero’s bottom panel.

This will somehow make your device “float” in the air, allowing the airflow to cool down sufficiently at the bottom of your Eero Pro 6, decreasing the heat.

Tip: You can use any box if it’s not made from plastic or metal.

5. Stop Direct Sunlight Exposure

Well, one of the most significant factors that can contribute to a higher internal temperature on your Eero Pro 6 is direct sunlight exposure. 

You need to select a spot for your Eero Pro 6 that is not directly exposed to sunlight throughout the day (a shady spot).

Do NOT cover your Eero Pro 6 with a blanket to conceal the device from the sun since any sort of enclosure will trap the heat and increase the temperature even further.

6. Use an External Cooling Fan

Sometimes, during the summer season, it’s too hot for some of our devices, especially if your Eero Pro 6 is under heavy utilization. 

A guaranteed method to keep your Eero cool is to install an external fan, blowing against the back vents of your Eero, cooling the device throughout the day.

These fans are not expensive. They vary in price, but you can find something under $10 online that will do the job flawlessly.

You don’t need a strong fan, only something that’ll provide sufficient airflow on the back of your eero and keep the hardware cool during the hottest season.

7. Reduce eero Pro 6 Utilization

The harder your Eero Pro 6 must work throughout the day, the more heat the unit will produce, hence a way to cool down the device is to reduce the utilization. 

By utilization, we mean all the devices connected to your Eero simultaneously and how they use your Eero Pro 6.

For instance, if you have too many devices connected to Eero Pro 6, and they are streaming, uploading, or downloading, eero must work harder, hence producing more heat.

So, here are a few things you can do to stop the overheating:

• Stop downloading or uploading on connected devices.
• Unpair units from your eero that you don’t actively use.
• Ensure that eero-connected devices are not updating.

If your eero keeps overheating even when the utilization has been decreased, perhaps that’s not what causes the excessive heat.

So, let’s keep reading to identify any software problems.

8. Update eero Pro 6 Firmware

Your Eero may be overheating because of a glitchy software update, so it’s recommended to try to update your Eero to the latest version.

This may prevent some system tasks from utilizing the Eero, preventing excessive heat and lowering down the internal temperatures of the Eero Pro 6.

Here’s how to update your eero Pro 6 in easy steps:

1. Open the Eero app on the mobile device.
2. Tap on the “Settings” icon at the bottom.
3. Tap “Software Updates” to check for any.
4. Select “Update” to install the latest build.

When your device is up to date, bug fixes and additional software scripts will likely stop the Eero from overheating.

However, if you’ve implemented all the previous solutions, you’ll likely rarely or never encounter overheating again.

Note: If your eero continues to overheat, even after implementing the solutions from this guide, seek professional assistance or check your warranty.

Quick Recap

Hence, to deal with the Eero Pro 6 overheating, unclog and clean the vents, prevent direct sunlight, and elevate your Eero’s position.

Also, implement a cooling fan and update your Eero’s firmware version to the latest build.

We hope this guide was helpful, so follow us for more!