Are you experiencing problems with your Asus router login not responding correctly?
Let me share with you how you’ll be able to resolve this issue without running into more problems.
We recently came across this problem with one of our Asus routers.
We looked for the most effective solutions and came up with a list of six that will help you fix the error in less than 10 minutes.
Here’s how we fixed our Asus router issues:
To fix your Asus router not responding to login, you’ll want to make sure your connections are secure and correct. Check your network settings on your computer and set it to obtain its IP address automatically so it can communicate with your router.
Before we dive deeper into the actual fixes, let’s first look at the different causes, then we can move on to attempt the solutions.
The problem with your Asus router login not working usually comes from several known sources.
We recommend looking at your network connections and making sure they’re in the right ports.
Your router and adapter’s software also matter as inconsistencies between them can happen.
Here are the possible issues that you’re likely to face if you’re unable to login into your router:
1. Wrong Connections
Your device needs to connect to your router to access it. If there’s a problem with the connections, you won’t be able to log in using your computer, laptop, or even your phone,
2. Outdated Network Adapter Drivers
Network adapters need drivers so they work properly. They can malfunction and lose connection with your router if they’re not updated.
3. No IP Address is Set for the Device
Routers hand out IP addresses to different devices on your network. If your computer does not get it automatically, it won’t connect to your router.
4. Router Software Issue
Old or outdated router firmware can prevent you from accessing your router’s login window.
These are the problems that you can expect when you’re unable to log in to your Asus router.
Now that you have a good idea of what these are, let’s proceed to the proven solutions that will fix this issue in no time.
How to Fix Asus Router Login Not Responding?
There are a lot of things you can do to remedy this error with your Asus router. However, we do recommend ticking off some of the easy ones first.
If they work, you’ll be able to save a lot of time and effort. At this point, we recommend that you reboot your router.
You can even unplug it from the wall outlet so it can discharge and flush out the contents of its temporary memory.
In case a reboot does not solve the issue for you, we can now attempt the other solutions.
One of the first things you need to do if you can’t log in to your Asus router is to connect it and your device physically.
Wireless connections are convenient, but nothing beats physical wires when it comes to stability and connectivity.
Your router will come with a bundled network cable. It’s the best one to use if you want to connect your computer to your router.
Here’s how to hardwire your computer and router:
- Get the network cable from your Asus router box.
- Connect one end of the cable to one of your router’s LAN ports.
- Connect the other end of the cable to your computer or laptop.
- Wait for your device to confirm the connection.
- Open your web browser and type in http://router.asus.com.
Note: If both devices are too far from each other that the bundled cable can’t reach, you can use a different one as an alternative.
If you’re experiencing a login error on your router, there’s a good chance that it’s not your router’s fault.
There are always two devices at play here, so you want to take a closer look at your computer or laptop. You want to zoom into the network adapter drivers.
It’s not necessarily a hardware issue, but if they’re running on outdated drivers, they can malfunction and not connect with your router.
You want to make sure that they’re always up to date.
Here’s how to update your network adapter driver on your computer:
- Open your computer’s Device Manager.
- Select Network adapters to open the list.
- Right-click on your current network adapter.
- Select Update driver.
- Wait for the update process to complete.
Note: After the installation process is done, you can try to connect to your router to see if it's working.
There are usually several cables that are connected to your router. Even wireless ones need a few cables for them to work correctly.
You need to connect it with your modem so you can enjoy using the internet on your other devices.
Even though we’re dealing with at least a couple of cables at the very least, you want to make sure that they are plugged into the correct ports.
Setting it up wrong can cause your router to disconnect and you’ll be unable to login into its admin dashboard.
Here’s how to connect your router properly:
- Make sure your modem is connected to the WAN port.
- Remove the cable connector from your router’s ports.
- Plug them back in securely.
- Check for signs of damage on your ethernet cables.
Tip: You’ll know that your cables are plugged in correctly since you’ll hear an audible click.
Your computer or laptop needs to connect to your router so you can gain access to its login page.
There’s usually no problem with it, especially if you’ve left the settings as it is. However, there are instances when you need to change it.
Your network adapter should be set to obtain an IP address automatically. There’s a configuration that will change it manually, and this is where it can start to cause problems.
In this case, automatic is the way to go as your router will be able to assign unique IP addresses for different devices.
Here’s how to set your adapter to get its IP address automatically:
- Click on the Start button, then Settings.
- Select Network & Internet.
- Choose the network you’re currently on.
- Navigate to IP assignment, then click on Edit.
- Choose Automatic (DHCP).
Note: We recommend setting it to automatic to avoid any further issues with your network.
Enabling your browser to use a proxy server will allow it to bypass its current connections.
This means that it won’t be able to see your router causing you to not be able to log in to its admin dashboard.
Changing your router settings at this point is going to be impossible until you disable the server and restore your connections.
The proxy settings on your browser are disabled by default. There are certain circumstances when you need to enable it and you might have forgotten to disable it.
Here’s how to disable your browser’s proxy settings:
- Open your browser’s Settings menu.
- Select Show advanced settings.
- Click on Change proxy settings.
- Go to LAN settings.
- Under Proxy server, untick the box, then click OK.
Note: You’ll only need to do this on the browser that you’re going to use to access your router.
If none of these solutions work out, you can always rely on the trusty reset. Doing this should restore your router’s original settings and get everything working again.
This step also comes in handy if you forgot your router’s username and password as it will revert them to their defaults.
Here’s how to reset your Asus router:
- Look for the Reset button on your router.
- Get a pin or a paper clip and press on it.
- Press and hold the button until you can see your router’s lights blinking.
- Release the button and wait for your router to power up.
Note: You’ll need to set up your router settings again after performing this step.
There you have it! – The complete steps to get your router’s login working again.
If you’re still having issues since none of these solutions work out, contact Asus customer support since they’ll be able to assist you with your router problems.
Read Next: How to Fix Asus Router 5G Not Working?
Now that you know the different solutions to fix your Asus router login not responding, you can now do it yourself and regain control of your network.
As long as you follow the different solutions, you’ll be able to get your router working again in under 10 minutes.
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.