Amaysim Data Not Working? (Panic Off, Fix It Here!)

Amaysim data not working? This guide will unwrap the most efficient solutions on the web!

Your mobile’s data capabilities might have been locked due to misconfigured APN settings or issues with the carrier’s network.

However, it’s not that simple, and there are many factors to check, so we recommend following the guide chronologically.

To fix when the amaysim data isn’t working, reboot the device’s mobile data feature and reinsert the SIM card. Correct the APN settings of the mobile device and reset the phone network setting.

Let’s learn why the amaysim mobile data issue appears.

Why is the amaysim Mobile Data Not Working?

Here’s what could cause issues with the amaysim data:

An issue with the phone’s mobile data feature.
The device is locked to another cellular carrier.
Incorrect network settings of the mobile device.
A misconfiguration in the mobile APN settings.
A connection issue with the carrier’s SIM card.

Remember that an amaysim outage can cause loss of data usage on any mobile device, regardless of the operating system.

Keep reading to identify what causes the data outage!

Amaysim Data Not Working – Quick & Easy Solutions

Anything below 2 bars is considered bad cellular connectivity and might restrict most of your mobile services, such as cellular calling and mobile data usage.

Note: Before attempting any of the solutions, verify that the cellular indicator of your device has at least 2 bars.

1. Restart the Mobile Data Feature

The first method for resolving the mobile data connectivity failure is to reactivate the Mobile Data feature on your device.

All mobile OS has a mobile data feature that toggles the carrier’s internet, so resetting it is the first and easiest step.

How to Restart the Mobile Data On Android?

First, open the “Settings” app on the Android device.
Select “Mobile Data” or “Cellular” on the homepage.
Next, locate the feature’s activation slider at the top.
Tap the activation slider to turn off the data feature.
Wait for 30 seconds and tap the activation slider again.

How to Restart the Mobile Data On iOS?

Open the “Settings” app on your iOS device.
Tap on “Mobile Service” in the front section.
Next, tap the “Mobile Data” slider at the top.
Wait for ~45 seconds after the deactivation.
Tap on the slider to turn on iOS’s mobile data.

Note: You cannot use the amaysim data while the setting is off.

2. Embed the amaysim SIM Card

A fault in the connection between the amaysim SIM card and the mobile device will result in the carrier losing all cellular features.

So, the next step is to reinsert the SIM card from the device’s cardholder tray, clean the slot and re-embed the SIM chip to renew the cellular connectivity.

Follow these steps to reinsert the amaysim SIM card:

Locate the SIM compartment on the side of the device.
Insert a SIM tool to pop-open the SIM tray compartment.
Next, remove the amaysim from the tray of your device.
Clean the SIM tray and place the SIM card onto the slot.
Finally, gently place the tray back into the mobile device’s slot.

Note: Contact amaysim if the SIM does not fit the tray or the chip seems defective!

3. Adjust the Device’s Carrier Settings

When connecting to a new carrier, specify the carrier’s network in your device’s settings.

Not setting a preferred cellular network will prevent the amaysim mobile from performing cellular calls, sending SMS/MMS and using the mobile data.

How to Specify Preferred Carrier On Android?

Start by launching the “Settings” app on your Android.
Go to “More Networks” or “More Settings” (old models).
Tap “Network Operators” and wait until all are displayed.
Choose “amaysim” from the available network options.
Confirm the carrier and exit the device’s network settings.

How to Specify Preferred Carrier On Apple’s iOS?

Launch the “Settings” app on your Apple iOS device.
Tap on “Cellular” and navigate to “Cellular Network.”
Choose “Network Selection” from the options below.
Turn off the “Automatic” feature and wait for results.
Locate the amaysim carrier and lock in the selection.

How to Check if My Device is Locked?

If you’re not using an amaysim-powered device, your mobile might be locked to the previous carrier you purchased it with.

So, here’s how to identify if your device’s cellular is restricted:

To check on Android, go to “Settings” → “Connections” → “Mobile Network” → “Automatically Select Network.”

If there is a carrier, the device is unlocked.

To check on iOS, go to “Settings” → “General” → “About” → “Carrier Lock.”

If the panel says “No SIM restrictions,” the iPhone or iPad is unlocked to new carriers.

Note: Contact your previous provider to discuss the unlocking of your mobile!

4. Correct the amaysim APN Settings

All mobile devices have APN settings that allow connecting with a third-party provider and optimising cellular usage.

If your mobile’s APN is not set towards amaysim’s preferences, you may lose access to many cellular features, including amaysim’s mobile data and allowance.

How to Access amaysim APN iPhone Settings?

To set iOS APN, go to Settings → Mobile → Mobile Data Network.

How to Access amaysim APN Settings Android?

To set Android APN, go to Settings → Mobile Networks → Access Point Names.

amaysim Correct APN Configuration
APN Setting Name	Correct amaysim Value
Name	amaysim Internet
APN	yesinternet
Proxy	<Leave Blank>
Port	<Leave Blank>
Username	<Leave Blank>
Password	<Leave Blank>
Server	<Leave Blank>
MMSC	<Not Required>
MMS proxy	<Not Required>
MMS port	<Not Required>
MMS protocol	WAP 2.0
MCC	505
MNC	02
Authentication type	PAP
APN type	default

The APN settings that are not required can be left empty before saving the changes made to the network.

If you require either of the non-necessary settings, you can easily adjust them anytime.

Tip: When you’re ready, restart your amaysim mobile!

5. Add Extra amaysim Mobile Data

Adding extra mobile data to your amaysim subscription plan is always possible through the amaysim mobile app.

You can regulate the consumption or add more based on your needs.

Here’s how to add Extra amaysim data to your monthly plan:

Open the amaysim app on your mobile device.
Next, swipe upwards from the app’s homepage.
Select “Add Data” and follow the instructions.

How to Check Remaining amaysim Data?

You can always check how much of the monthly data you’ve exhausted within the “Plan menu” tab within the amaysim mobile app.

You also restrict applications from the data to prevent the consumption of remaining megabytes from being wasted on commercials and unwanted ads.

Quick Fact: Streaming and downloading consume the most data!

6. Check for Local amaysim Outages

If there’s an amaysim outage deactivating the service in your local area of residence, you will temporarily lose access to all cellular activity, including the ability to use mobile data.

Hence, the next step is to access amaysim’s online outage checker to determine if the service is impacted.

Here’s how to check the mobile status of amaysim:

Open a web browser on a connected mobile device.
After that, access amaysim’s Outage Checker page
Next, select your service type and check for outages.

Coverage Layers

5G/4G – Selecting this will display all 5G/4G outages on the amaysim outage map.

4G – Selecting this will display all 4G service outages on the amaysim outage map.

3G – Selecting this will display all outages on the amaysim outage map.

Note: Based on your amaysim service type, you can quickly tell whether your service area has been impacted by a 3G, 4G or a 5G outage!

7. Reset the Device’s Network Settings

In case the amaysim data is still not usable, it is recommended to restore the device’s network configuration to default values.

Remember that erasing the network options will delete all Wi-Fi, Bluetooth and cellular settings that have been added, optimised or configured on your mobile.

How to Reset Network Settings On Android?

Open the “Settings” app on the Android device.
Scroll down and tap on the “System” selection.
Scroll down and tap on the “Reset Options” tab.
Select “Reset Wi-Fi, mobile & Bluetooth” below.
Tap “Reset Settings” and follow the instructions.

How to Reset Network Settings On iOS?

Go to “Settings” and access the “General” tab.
Tap “Transfer or Reset [Device]” at the bottom.
Choose the “Reset” button to start the process.
Select “Reset Network Settings” in the menu.
Follow the necessary steps to finalise the reset.

Alert: None of the content eased after the network settings reset can be restored!

Quick Recap:

Whenever the amaysim data not working, reactivate the mobile data feature of the mobile device and specify amaysim’s network in your device’s options.

If the problem persists, correct the APN settings of the device and reset the phone’s network options to default.

Finn Wheatley

Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.