How to Limit Bandwidth on PTCL Router?

If you are searching for how to limit bandwidth on PTCL router, you have come to the right place. 

The idea of limiting PTCL routers has always been a problem for many. This is because some PTCL routers do not offer this function.

Even so, most modern routers offer an option for limiting bandwidth. You may even limit bandwidth to certain applications.

To limit bandwidth on the PTCL router, log in to your administration area and proceed to the Traffic Management section under the QoS settings.

You can now change the upload and download speeds of the device.

Besides changing the upload and download speeds for the device, you can also limit access time. This means that you can allow the device to access the internet at specific hours.

Keep on reading to learn more about the changes you can make to your PTCL router bandwidth.

Why Limit Bandwidth on PTCL Router?

There are several reasons why you may want to limit your PTCL router bandwidth. Among the top reasons is to control your children’s activities.

If you want to control access to the internet at home, you could limit bandwidth on some devices.

The other reasons for limiting bandwidth on the router are as follows:

1. You may limit bandwidth to prevent one device from consuming all of the available bandwidth.
2. You may limit bandwidth to assigning priority to certain devices or applications. This helps ensure that important tasks have the bandwidth they need to function properly.
3. Limiting bandwidth may help in cost-cutting. Your PTCL router can be configured to limit the amount of data that can be downloaded or uploaded.
4. You may limit bandwidth to improve network security. By limiting the bandwidth available to certain devices or applications, you can reduce the risk of malware or unwanted traffic.
5. Limiting the amount of bandwidth is often used for parental controls.

It is important to note that too much restriction of bandwidth can cause applications to malfunction.

You should only limit bandwidth if you are absolutely sure of the steps you are taking.

How to Limit Bandwidth on PTCL Router – Step by Step

The process for limiting bandwidth on a PTCL router is not complicated. Even as we look at how to set bandwidth limit on PTCL routers, you must remember that this option is selected.

On some PTCL routers, you will not have an option for bandwidth limiting. If your router does not offer a QoS function, limiting bandwidth may not be possible.

Below are the main steps you can take to limit your device’s bandwidth.

Step #1 Connect Your Router to the Modem

The first step you have to undertake is to connect your PTCL router to your modem or device.

If you are connecting the router directly, use an ethernet cable. If you are connecting via modem, follow the steps below.

How to Connect a PTCL Router to a Modem

1. Connect the modem to a power source and turn it on.
2. Connect one end of an Ethernet cable to the WAN (Wide Area Network) port on the PTCL router.
3. Connect the other end to the LAN (Local Area Network) port on the modem.
4. Connect your computer or device to the PTCL router by connecting to the router’s Wi-Fi network.

How to Connect to PTCL Router via Ethernet Cable

1. Locate the Ethernet port on your computer or device
2. The port is usually labeled as “Ethernet/LAN” 
3. Connect one end of the cable to the Ethernet port on your computer
4. Connect the other end of the Ethernet cable to one of the LAN ports on the back of the PTCL router
5. The ports are usually labeled as “LAN” or numbered
6. Once the cable is connected, the device should automatically detect the connection.

Note: Some old devices may fail to connect to the internet directly and require configuring. 

If this is the case, you can set it up manually or connect via the Wifi.

Step #2 Login to Your PTCL Router 

The first step you should take is to log in to your router interface. This is a straightforward step where you enter the default username and password.

Once you enter these details you can access all settings necessary to limit your bandwidth.

Here are the steps to log in to user interface

1. Open a web browser on your computer and type the IP address of the PTCL router (usually “192.168.1.1”).
2. Enter the Username and Password for the router’s admin interface. 
3. The default login credentials for PTCL routers are “admin” for the username and “admin” or “1234” for the password
4. Configure the router’s settings as necessary 

Note: Some PTCL router and modem models may require different steps to connect to your device.

Step #3 Configure Basic Settings for Your Router

Once you are logged into your router, you may want to configure some basic settings.

However, this step is only necessary if you have never set up your router.

If your router is already well set up, you may jump straight to bandwidth limiting in step #4 below.

1. Click on the Setting Tab
2. Navigate to the Network tab.
3. Click on Configure WAN (Wide Area Network) settings. 
4. Select the type of internet connection you are using eg DHCP, PPPoE, Static IP
5. Enter the necessary login information to confirm
6. Click on Configure LAN (Local Area Network) settings. 
7. Enter the IP address, 
8. You may also need to enter the subnet mask and DHCP settings for your local network.
9. Go back and click on the Wireless Network Name or (SSID)
10. Select security option and save your password accordingly

Note: These settings are usually done by your ISP during the initial router setup. 

You may want to change them if you are familiar with what you are doing. However, it is not mandatory to change them for limiting bandwidth.

Step #4 Set up Bandwidth Control for Specific Device

Once you have connected and configured your PTCL router, you can navigate to the bandwidth control or Quality of Service (QoS) settings.

Here, you have the ability to limit the amount of bandwidth available to specific devices.

Steps to limit bandwidth on PTCL router for MAC address

1. In the Main menu or in a sub-menu under “Advanced” or “System”
2. Navigate to the “Traffic Management” section 
3. Select  “QoS” settings
4. Click on the MAC address of the device you want to limit Bandwidth
5. When the device opens up click on Upload or Download speeds
6. Set the desired Upload and Download bandwidth limits for the device
7. Click Save the changes you made and reboot the router

Note: The steps for some TPCL routers may be slightly different. 

Once you Navigate to the bandwidth control or QoS (Quality of Service) settings check for “Advanced,” “Firewall,” or “Traffic Management.”

Step #5 Bandwidth Control for Specific Application

You may also set up bandwidth control for a specific device. This happens under QoS settings.

You will have to go to Advanced settings and set up your desired bandwidth limit for a selected device.

Steps to set PTCL router limit on specific applications

1. Go to the Traffic Management section
2. Select Advanced settings
3. Click on the Application you would like to control
4. Click on Create a New Rule
5. Assign the preferred speeds under Uploads and  Downloads
6. Click on Save to confirm the Changes
7. Restart your device

The steps for accessing the bandwidth control settings on some PTCL routers may vary slightly on the router model.

Also, some PTCL routers do not support the feature of bandwidth limiting, so you may need to check if your router supports the feature or not.

Summary

Now you know how to limit bandwidth on a PTCL router from your settings. You can set up bandwidth control for both the device and specific applications.

After setting up bandwidth control, you must restart your router to activate the changes.

Read Next: Does a Router Store Information? – All You Need to Know