How to Change WiFi Network on Shark Robot?

Do you know how to change WiFi network on Shark Robot? Whatever your reason for changing the WiFi network on your vacuum, we’ve got you covered!

Changing the WiFi network your Shark robot is connected to can be a challenge.

It’s not like your mobile phone, where you simply scan for any new network and connect to it.

Here, we have the proven steps to help you get through this in just a few minutes.

So, how can you change the WiFi network on your Shark Robot vacuum?

Let’s find out!

To make the change, first, get your WiFi password. Then, prepare your Shark Robot vacuum and router for the process. Make sure 2.4GHz is activated. Next, delete and add your vacuum to the app. This will allow you to set it up again and select a brand-new WiFi connection that your vacuum can link to.

Before we proceed to the actual steps of changing your WiFi network, let us discuss the reasons you need to do so.

Why Change WiFi Network on Your Shark Robot Vacuum

The Shark Robot vacuum must be connected to the Internet to function properly.

Without WiFi, it can still carry out spot clean-ups and full-home clean-ups, but connecting it to WiFi enables advanced features.

You can schedule cleaning, select suction power, and many more.

1. Troubleshooting Your Connection

When your vacuum malfunctions, it may be due to your WiFi network. Your connection may not be strong enough, or your device requires a different frequency.

2. Upgrading Your Network Devices

Your router software may be out of date. You may have forgotten to update your router’s firmware, so your network is now riddled with malware, viruses, and other threats.

2. Robot Not Connecting To The Network

When your Shark Robot vacuum is not connecting to the network, it may be dropping the signal.

Either the router is positioned in a dead zone, or something may be blocking the signal.

3. Malfunctioning App

Shark Robot needs to be connected to the mobile app in order to carry out certain functions.

If the app isn’t working properly, it is likely due to connectivity issues or bugs and glitches.

These are the possible reasons you need to change the WiFi network on your Shark Robot vacuum.

Now, let us discuss the actual steps of the process.

How Do I Change the WiFi on My Shark Robot

Knowing how to change WiFi network on Shark Robot can be beneficial when you encounter issues with your device.

It allows you to troubleshoot the problem on your own, saving you more time and money.

But before you change the WiFi on your robot vacuum, power cycle your device to refresh the connection. Turn it off, then back on again.

If this doesn’t work, you can proceed to the steps below to change the WiFi network on your vacuum.

Follow the steps below.

Step #1: Make Sure You Have Your WiFi Password Handy

If you want to change which WiFi network your Shark robot vacuum is connected to, you want to make sure you have the right information.

If you’re not going to change your router’s settings and WiFi password, you’re going to find the defaults on your router’s product sticker.

One of the reasons you might be having a hard time connecting to a different WiFi network on any device is that you typed in the password incorrectly.

Connecting to a different network with your Shark vacuum involves quite a few steps, so it helps if you get it right the first time.

Here’s how to prepare your WiFi password:

1. Get your router and flip it upside down.
2. Look for the product sticker with your router’s default information.
3. Find the default SSID password on the sticker.
4. Write it down so you can use it later.

Note: Your router’s product sticker may contain two passwords, so make sure you look for the one that says SSID password rather than admin password.

Step #2: Prepare Your Network and Devices for the Process

Before you go about connecting your robot vacuum to a different WiFi network, you want to eliminate the possibility of bugs and glitches.

That’s why we recommend preparing your network for a much smoother experience.

Here’s how to prepare your network and get rid of possible issues:

1. Reboot your WiFi router by unplugging it for 1 to 2 minutes.
2. Connect your phone with the Shark app to your WiFi network.
3. Turn off your Shark robot’s power switch for 10 seconds.
4. Reboot your phone and wait for a few minutes before turning it back on.

Step #3: Make Sure Your Router’s 2.4G is Activated

One of the things you need to know about your Shark robot vacuum is even though it connects to your WiFi, it’s only compatible with 2.4G.

All routers carry this frequency. However, you might have changed your router’s settings and deactivated it.

A 5G connection is undoubtedly the superior frequency in terms of speed and performance.

However, your vacuum doesn’t really care about all that. So, a 2.4G connection is enough, and you want to ensure it can connect.

Here’s how to activate your router’s 2.4 GHz frequency:

1. Open your browser and log in to your router’s web interface.
2. Go to your router’s Advanced Settings tab.
3. Select Wireless or WiFi.
4. Look for WiFi Bands.
5. Enable 2.4 GHz.

Tip: If you have a dual-band router, you can enable both the 2.4 and 5 GHz bands.

Step #4: Delete Your Shark Robot from the App

After all that prep work, it’s now time to reconnect Shark robot to WiFi. It comes with a companion app that should help you manage your vacuum.

To change the WiFi network your vacuum is connected to, you’re going to need to reconnect it

The first step is to delete it from the app. There’s no straightforward way for you to connect it to a different network like the way you do it on your phone.

Here’s how to delete your vacuum from the Shark app:

1. On the Shark app, select the Menu icon.
2. Go to Settings.
3. Under the Robot tab, tap on your Shark robot.
4. Select Delete Robot.

Step #5: Add Your Robot to the App and Reconnect it to the WiFi

After deleting your vacuum from the app, you’re now going to need to add it so you can set it up again.

This doesn’t really reset your vacuum settings, but it certainly is an extra step that you need to perform.

Adding your Shark back into the app will trigger the activation process of your vacuum.

This includes connecting it to the WiFi network, which you’ll have to select and enter manually.

Here’s how to add your robot vacuum back into the app:

1. Open the Shark mobile app on your phone.
2. On the Robot tab, press the Plus (+) button.
3. Switch on your Shark robot.
4. Press the Dock and Max buttons simultaneously.
5. Choose your new WiFi network and connect to it.

Tip: If the connection fails the first time, try again and be more deliberate in entering your password.

Step #6: Reset Your Shark Robot Vacuum and Reconnect to the WiFi

Now, you can reset your vacuum back to factory settings, it’s certainly one of the options you can do to reconnect it to a different WiFi network.

The problem with this is that it’s not the most efficient method. However, there is one scenario where it’s the perfect solution to this problem.

You just moved to a new house, and you surely need to connect it to the new WiFi network.

You also need to reconfigure your vacuum so it can map out your new house. In this case, a reset is going to be your top option.

Here’s how to reset your Shark vacuum and connect it to your new WiFi:

1. Open the Shark app on your phone.
2. Tap on Settings.
3. Select Factory Reset.
4. The reset process can take up to a few minutes.

Now, it’s time to set it up again to connect it to your new WiFi network:

1. Launch the Shark app on your phone.
2. Log in to the app with your username and password.
3. Turn on your Shark robot and press the Left and Right buttons.
4. Wait for the WiFi indicator light to start blinking.
5. Once it does, choose the WiFi you want to connect to.

Note: You’ll know the pairing process is complete when the WiFi light on your Shark robot turns blue.

These are the steps that you need to take if you want to change the WiFi connection on your Shark robot. It’s not something that you’re going to do every day.

However, in cases where you want to change your router or move to a different home, it’s something you want to know.

You can contact Shark customer support if you run into issues connecting to your WiFi network.

Read Next: Why Won’t My Shark Robot Connect to WiFi?

Bottom Line

You now know how to change WiFi network on Shark robot. It’s not as complicated as you think it is.

The steps are simple and easy enough to follow, so you can set everything up in just a few minutes.