Canon TS3522 Not Connecting To WiFi? – (Instant Fix!)

Is your Canon TS3522 not connecting to WiFi? Before you throw it away, give these fixes a try!

If you’re using it as a network printer, you want to maintain a constant connection to the internet. Any disruption can cause problems that you’ll need to fix right away.

Here’s how you can do it!

To get your Canon TS3522 printer to connect to the internet, give it a quick reboot. If that doesn’t work, you’ll need to go through your connecting settings, like changing its MAC address and resetting its network settings.

Before we delve into the details of the solutions, let us enumerate the different causes of your Canon TS3522 printer not connecting to WiFi. 

Different Causes of Canon TS3522 Not Connecting to WiFi

Your Canon TS3522 printer isn’t connecting to your WiFi because either it’s off or unavailable on your computer.

Before proceeding, ensure you have installed the Canon printer driver on your computer. Next, check your computer and printer on the same wireless network. 

• You’re entering the incorrect WiFi credentials when connecting
• Your network is experiencing issues like a weak signal
• There are changes in your network configurations
• There is a significant amount of interference with your network
• Your printer is using outdated drivers

These are the possible reasons your Canon printer isn’t connecting to your WiFi.

Now, try the following solutions and see if they resolve the issue.

Full Fix Guide for Canon Printer TS3522 Not Connecting to WiFi

Depending on the cause of the issue, you can try one or more of the following solutions to fix your Canon TS3522 not connecting to WiFi.

But first, start with the simplest method. Rebooting your printer is one of things you should attempt.

If you’re still experiencing issues with your Canon TS3522, you want to move to the more advanced solutions below.

Solution #1: Refresh Your Network Devices to Resolve Network Issues

Sometimes, your printer and computer may encounter temporary glitches or conflicts affecting your network performance.

One reason this can happen is when there is an issue with your network.

To resolve this, you need to refresh your entire network by clearing any residual data or temporary settings incompatible with your setup.

Here’s how to refresh your connection by power cycling your network hardware:

1. Switch off your network devices like your modem and router.
2. Completely discharge them by unplugging them from the wall socket.
3. Wait for 2 to 5 minutes before plugging them back in.
4. Turn your modem on first, and wait for it to connect.
5. Switch on your router.

Note: Give your modem and router a few minutes to establish a connection. 

Once they’re up and running, turn on your network devices and test your new connection.

Solution #2: Reconnect Using the WiFi Connection Assistant

If you use a Windows PC and have changed your WiFi network name and password, let the WiFi connection assistant reconnect your printer to your wireless network.

This will save you from having to uninstall and reinstall any software. The WiFi assistant will diagnose and repair the communication between your printer and computer for you. 

Here’s how to use the WiFi connection assistant to reconnect your printer:

1. Get the WiFi Connection Assistant app on your computer.
2. Open the app and click on Diagnose and Repair.
3. Wait for the app to connect to your printer.
4. Choose your printer from the list, and confirm it on your printer.
5. Wait for your computer to help your printer connect to your WiFi network.

Pro Tip: To ensure that your devices communicate properly, it’s recommended that you reinstall your printer’s drivers.

Solution #3: Connect Using the Canon Print or SELPHY App

If you have an iOS or Android device, you can use the Canon PRINT Inkjet/SELPHY app to reconnect your Canon TS3522 to your WiFi.

To do this, download and install the app from the App Store or Play Store first. This should allow you to reconnect your printer to your WiFi network without issues.

Here are the steps to connect your printer to the network via the Canon Print or SELPHY App:

1. Launch the app on your phone.
2. Tap on the Register Printer option.
3. Choose your Canon TS3522 from the list.
4. Choose the WiFi network and enter the password.
5. Confirm and wait for your printer to connect to WiFi.

Note: The advantage of using the app to connect your printer to the network is that you can do it even if you don’t have access to a computer. 

Solution #4: Switch Off Your Router’s 5G Broadcast Mode

To ensure your Canon printer can connect to your router, you may need to turn off the 5 GHz option in the router’s settings.

Turning off the 5 GHz broadcast mode ensures your printer only connects to your WiFi network using the 2.4 GHz frequency band. 

The 2.4 GHz band on your router is more stable, especially if your printer is farther away from your router than you would have liked.

Here’s how to turn off your router’s 5G WiFi Mode:

1. Access your router’s dashboard using a web browser.
2. Enter your router’s IP address, and log in using the admin username and password.
3. Navigate to the Wireless or WiFi Settings menu.
4. Scroll down and look for the 5 GHz setting.
5. Toggle the switch to off or select Disable.

Note: Disabling the 5 GHz option can affect the speed and performance of other devices, but you should have a better signal for your printer.

Solution #5: Register Your Printer’s MAC Address Manually

You may need to manually register your printer’s MAC address to ensure a stable connection between your printer and router.

To do this, access your router’s settings and enter the MAC address under device authorization. Once authorized, you should be able to connect to your WiFi network without any issues. 

But first, find your printer’s MAC address. Press and hold the STOP button on the printer until the Alarm LED flashes 15 times, then release it. Your printer will print the network setting information. 

Here’s how to register your printer’s MAC address with your router:

1. Access your router’s dashboard by logging in with the admin credentials.
2. Go to your router’s Settings, and select MAC Filtering.
3. Turn on your router’s MAC Filtering feature.
4. Add your router’s MAC address to the list and click on Save.
5. Restart your router and printer to test their connection.

Tip: Your router’s admin credentials can be found on the box or a sticker stuck to the backside of your router.

Solution #6: Reset Your Printer’s Network Settings

There are certain issues that even these solutions are not enough to get your printer to connect to your WiFi.

If this happens, resetting your printer’s settings is one way to resolve any software or network issues.

In particular, you want to look at refreshing your printer’s network settings. Doing this will remove network configurations saved on your printer’s memory and remove any bugs and glitches in the process.

Here’s how to reset the network settings of your Canon TS3522:

1. Press the Setup button on your printer.
2. Press it until the number 17 appears on the screen.
3. Press the Black or Color button to select.
4. Wait for your printer to reset its settings.

Note: After resetting your printer’s settings, you must set up the network and connections again.

These solutions should help you resolve the WiFi issues associated with your printer. If none of these work, you can look into updating your printer drivers or choose to connect it via a cable.

You can also contact Canon customer support for technical help.

Bottom Line:

Now that you have a good idea of how to fix your Canon TS3522 not connecting to WiFi, you will be able to fix it yourself. You can also refer to your printer’s manual for troubleshooting tips to help you get your connection back.

Read Next: How To Connect Canon Mg3660 Printer To WiFi?