Confused by the Belkin wireless charger orange light? Stay with us to learn about the color codes of your Belkin wireless charger and what the orange light means.
In addition, we will go through the best working-fix methods for the orange light so remain invested!
The orange light on your Belkin wireless charger can be fixed easily by correcting the position of the charged device.
You must also make sure that your device supports wireless charging and that it is making clear contact with the surface of the charger.
Let’s learn about the color codes of your Belkin charger…
| Belkin Wireless Charger Light Codes! | |
| LAMP STATUS | Color Code Description – – – |
| The lamp is “OFF” | Your Belkin charger is on standby (not charging) |
| The lamp is “White” | Your Belkin charger is working (actively charging) |
| The lamp is “Orange” | An incompatible device is placed (not charging) |
Orange Light On Belkin Wireless Charger?
The orange light on your Belkin wireless charger means that a device that is not compatible with wireless charging has been placed on the device.
The orange light means that your charger does detect your device, but it cannot charge it because it is incompatible.
- The placed device does not support wireless charging
- There’s a surface interrupting the contact with the charger
- Your device has not been placed properly on the charger
- The Belkin wireless charger is having power/charge issues
- There’s a problem with the charging surface of your phone
Try This First!
Before we get into the solutions, check your Belkin charger for visual damage.
If your charger hit the ground too hard lately or you’ve accidentally poured liquid on top of it, it is possible that the charger malfunctioned.
Belkin Wireless Charger Orange Light – 8 Working Solutions!
Note: Follow our steps consecutively!
1. Reconnect the Charger from Power!
To fix any issues with your Belkin charger, it is enough to reconnect the device from power, which typically helps.
If the orange light has been caused by a temporal power surge issue with the charger, the most effective solution is the power circulation, which provides a fresh start.
Here’s how to properly discharge/power cycle your Belkin charger:
- Unplug the power cable of your Belkin wireless charger.
- Wait for 50-60 seconds while the adapter is disconnected.
- Reconnect the power adapter of your Belkin charger to power.
Check for Obstructions in the Power!
If the adapter of your Belkin charger is not connected to the power outlet securely, it may result in various hardware/software issues with the charger.
To correct such errors, inspect the surface of the charger and try to spot any damages.
Note: Also ensure that the power outlet looks in good condition and transmits power effectively!
2. Remove Wireless Charging Obstructions
If the device you’re placing on the Belkin charger’ surfaces is wearing a case or has something on the back that breaks contact, the status lamp of the charger may blink in orange.
If your phone/tablet, headphones, earbuds, or smartwatch has a case, it must be removed!
- Temporarily take off all covers from the charging surface of your device!
What Could Interrupt Wireless Charging?
Here’s a list of all factors and objects to remove:
- Metal objects
- Magnets
- RFID cards
- Credit/debit cards
- Thick phone cases
Note: For the Belkin charger to work properly, the back of your device must be cleared of all obstructions that could interrupt the back from magnetizing!
3. Test with a Compatible Device!
To determine if the problem is with your Belkin charger or device, you must attempt to charge a phone, watch, or headphones that you know are compatible with wireless charging.
The primary reason your Belkin may blink orange is due to an incompatible device!
Notice: While testing with a device you’re certain is compatible with wireless charging, check if the status lamp of your Belkin charger will change from orange!
Important – Compatibility!
Keep in mind that many earbud cases, smartwatches, smartphones, and other devices are still increasingly becoming adapted to wireless charging.
Check your user manual to instantly find out whether your device can magnetize to charge (supports wireless charging).
Here’s a list of many popular phone brands that have compatible devices!
Wireless Charging – Enabled Devices | |
| Brand | Devices |
| Apple | iPhone 8 Plus and above |
| Nexus 4,5,6,7 and Pixel 3 XL | |
| LG | G8, G7, V35, V30S ThinQ and G6, G6+ |
| Huawei | P20 Pro and above |
| BlackBerry | Standard Evolve, Evolve X, Priv, Q20, Z30 |
| Samsung | Galaxy S6 and above |
| Motorola | Droid Turbo 2, Moto X Force, Z series |
Tip: If you don’t see your device in the table above, check online for the specific model to verify whether the device is eligible for wireless charging.
How to Charge a Compatible Device?
Place your wireless-charging compatible phone, or tablet with the back panel facing down on the charger.
Once you hear the click and your phone has magnetized to the Belkin charger, lift your hand up and check the battery status of the phone.
Note: The magnetic click is the primary indication that the device has been placed correctly!
4. Charge the Device Normally!
Since the orange light may display a temporal issue with the charging of your compatible device, plug your device with a standard charger for a while.
If your device is having a power issue or a hardware problem with the battery, this is a great way to test it.
- Connect your device to a wired charger and let it charge for ~30 minutes!
Next steps: Whenever the device battery has been charged a little bit, normally, position the device on the Belkin wireless charger to test.
5. Clean the Charging Surfaces
If there’s something on the back of your phone or on the Belkin charger’s surface, the charging process will be interrupted and the status lamp will adjust to orange color.
To make sure nothing is interfering with the charging process, you must clothe both of the charging surfaces!
Here’s how to clean the charging surfaces of your charger/device:
- Spray some rubbing alcohol on an anti-fiber cleaning cloth.
- Thoroughly collect all dust/debris on the surface of your charger.
- Wipe the back (or the charging surface) of your compatible device.
- Wait for both the Belkin charger and your device to completely dry up.
- Place your phone on the charging surface of the Belkin charger.
Alert: It is important to wait until both of the charging surfaces are completely dried up since you may damage the equipment.
6. Deactivate Battery Saver Mode!
If your Belkin charger has recognized that your device uses a low-power supply, the lamp may change to orange and the charging will cease.
To make sure that your device is using the standard power required for operation, you must turn off all battery-saver modes!
How to Deactivate Battery Saver (iOS)?
- Launch the Settings of your iPhone/iPad.
- Scroll down and press on the “Battery” tab.
- Press on “Low Power Mode” to turn it off.
How to Deactivate Battery Saver (Android)?
- Open the Settings app on your Android device.
- Head into the “Battery Saver” or the “Power” tab.
- Check if a battery-saver mode is enabled and turn it off.
Note: Make sure that you have not enabled a battery saver on your earbuds, smartwatch, or other device you may be attempting to charge.
7. Switch Power & Reset Charger!
The Belkin wireless charger might not be working because the power is insufficient so it’s best to test with another outlet in your home.
Simply unplug the Belkin charger and test charging your devices while the charger is plugged into a different outlet, preferably in a different room.
How to Reset Belkin Charger?
To resolve any issues with the status lamp (since it may be bugged), you should perform a Reset on your Belkin charger.
It’s a way to refresh the hardware and the software of the Belkin charger and restore the functionality of the equipment at once!
This is not a factory reset, rather it’s a last-resort solution, which has proven to help many users with the same issue. To reset your Belkin charger, unplug the USB-C cable from the back!
Info: The Belkin charger cannot be factory reset.
Quick Recap:
In this guide, we’ve learned that when Belkin wireless charger orange light appears, it’s likely that the device is not supported and won’t charge.
In case the light appears due to an issue, power cycle the charger, stop the power-saver device modes and switch the power source.
Read Next: Belkin Wireless Charger Not Working? – Complete Fix Guide
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.