When the Belkin wireless charger not working from the start, the problem could be anywhere with the connection.
This is why, remain invested throughout this guide to unwrap everything!
If your Belkin wireless charger is refusing to work, ensure the device is plugged in all the way and check for any obstructions blocking the charger.
After that, inspect the software settings of your mobile device and verify that the charger is not faulty!
Let’s dig deeper!
Why Isn’t My Belkin Wireless Charger Working?
Here are the top reasons causing your Belkin wireless charger to malfunction:
- There’s a problem with the outlet’s connection
- Your mobile device has a casing, blocking the charger
- Temporal malfunction with the Belkin wireless charger
- The charging surface of your mobile device is unclean
- Faulty third-party equipment blocking the electricity
- Your mobile device does not support wireless charging!
Does My Device Support Wireless Charging?
It’s essential to learn whether your mobile device supports wireless charging ahead of all.
Older mobile devices do not have a compatible surface and can’t be charged wirelessly.
Here are popular brands of phones and their compatibility with wireless charging:
| Brand: | Apple | Huawei | LG | Motorola | |
| Model: | Pixel 3 XL and above | iPhone 8 and above | P30 Pro and above | G8 ThinQ and above | Z series and above |
Let’s next unwrap the best-working solutions against faulty Belkin wireless charger!
Belkin Wireless Charger Not Working – 8 Working Solutions!
Alert: Our solutions may not work on seriously damaged Belkin charger equipment!
1. Plug In the Charger Properly!
If there’s no power reaching your Belkin wireless charger, none of the devices you connect to the charging surface will charge.
You must verify that the power adapter of the charger is plugged in all the way and then connect your mobile device or watch to the charger.
- Connect the Belkin charger tightly to the electrical outlet!
Make sure that the power adapter has clicked into the power source and you’re not able to pull it out easily.
Only then, place your mobile device on top of the charging surface and check if your mobile device’s status will change to “Charging…”
2. Remove Any Cases From your Device
Attempting to charge your mobile device through the phone case on a Belkin charger, may prevent the electricity from going through.
This means your mobile device will not receive electricity until there’s clean contact with the Belkin charger’ surface and your phone!
- Remove the case from your mobile device and connect it to Belkin
Can you Charge a Phone Through the Case?
On wireless chargers where you have to place the mobile device on top of the charging surface, the thickness of your case may prevent the charging process.
You will be unable to dock your mobile device to the charger whenever there’s a case/casing.
Info: Even if your case is not that thick or large in size, the charging may work but insufficiently!
3. Power Cycle the Charger
To fix any temporal issues with your Belkin charger, you must power cycle the device to refresh the operational services.
If there are obstructions with the power flow within the Belkin charger, this process will help unclog the electricity and restore the functionality of the charger!
Follow these steps to power cycle your Belkin charger easily:
- Unplug the power cord of the Belkin charger.
- Wait for at least 60-70 seconds after unplugging it.
- Reconnect the power cable of the Belkin charger.
- Attach your mobile device to the charging surface.
In case the charger is still not working, keep reading!
4. Plug the Charger into a Different Outlet
Perhaps, you’ve connected the Belkin wireless charger to an inactive power source and there’s no electricity flow.
You must test charging your phone from the Belkin charger through a proven power source first, before proceeding further.
How to Change Belkin Charger Outlet?
- Unplug the power cable of the Belkin charger.
- Relocate the charging surface of the charger.
- Place the charger next to a different outlet.
- Connect the power cable of the charger to another outlet.
How to Test a Power Source?
To make sure that the new power source of your Belkin charger is functioning, try charging your mobile phone through a standard, wired charger.
You could also connect any appliance in your home to the outlet you’re testing and check if the device receives power.
Alert: Do not plug your Belkin charger into a malfunctioning power source!
5. Remove Third-Party Equipment
If you’ve attached any external/third-party equipment to the setup of your Belkin charger, the electricity may be getting blocked somewhere along the way.
Especially if the equipment you’ve added is faulty or not working properly, it could interrupt the charging entirely!
Type of External Charging Equipment
Make sure none of the following external equipment exists in your charger setup:
- Outlet connectors
- Cord extenders
- Power strips/dividers
- Attachments to mobile device
It’s important to ensure that the Belkin charger is connected directly to the power outlet and then attach your phone to the charging surface.
Keep all third-party/external equipment pieces out of the setup until further notice or until you’ve resolved the problem!
6. Clean the Surface of your Device
If the surface of your mobile device is unclean, the electricity may be unable to break through and reach the internal hardware.
In such a case, you must thoroughly clean the contact points of your mobile device with the charger, to ensure the reliability of wireless charging.
- Use a microfiber cloth to collect all dust on your phone’s charging spot!
Correct Position?
On many mobile devices (iPhones included), the charging spot is the entire back panel.
Thus, to charge your mobile device wirelessly, you must place its back panel on top of the wireless charger’ surface so it could start filling up the battery.
Glass Phone Back?
In case your device has a glass back that is shattered, it’s highly likely that the wireless charging won’t work. In those cases, it’s best to test your Belkin wireless charger with a working device.
7. Toggle the Airplane Mode Feature
Enabling Airplane Mode on your device will disable the ability of your phone to wirelessly charge as well as many other services on your phone.
It’s a working solution when your device is refusing to charge or is experiencing an onset of software/hardware issues.
- The Airplane Mode is available on both Android and iOS devices!
How to Enable Airplane Mode (Android)
- On Android, go to Settings > Airplane and press the activation slider twice
How to Enable Airplane Mode (iOS)
- On iPhone, bring up the quick access menu, tap Airplane, and then tap it again.
Info: Keep the airplane mode enabled for at least 15 seconds before turning it OFF again.
This is the time required for your mobile device to flush the temporal cache and connections!
8. Factory Reset your Mobile Phone!
If the charting fault is on your mobile device’s end, a factory reset will help to clear up any software issues that disturb the charging.
The factory reset is a setting that allows for full restoration of the default settings on your mobile device, by erasing all temporal information.
- If you don’t have a cloud backup, all apps, content, and settings will be erased!
How to Factory Reset an iPhone:
- Open the Settings tab on your iOS device.
- Navigate into the “General” tab and scroll down.
- Press “Transfer or Reset iPhone” in the options.
- Choose “Erase All Content and Settings”
- (Optional) Choose optional backup settings.
How to Factory Reset an Android:
- Tap Settings on your Android phone.
- Navigate to “General & Backup and reset”.
- Press on “Factory Data Reset” next.
- Choose “Reset Device” > “Delete All”.
- Wait until your Android phone has reset.
Info: If you haven’t selected any backup settings from the available cloud service on your phone, you will have to set up your mobile device from scratch.
All settings, content, and features will be erased as a result of the factory reset!
Wireless Headphone & Watch Charging?
Some wireless headphones and smartwatches are also compatible with wireless charging so let’s learn which are some of them.
In case you don’t see your headphones or watch here, you can check online whether your device can be wirelessly charged with the Belkin charger.
Here are the headphones and watches compatible with wireless charging:
- Apple Watch Series 8 and Apple Watch Ultra
- Airpods generation 1st, 2nd generation, Pro, and Pro 2
- Apple watches and headphones released after 2021
Tip: Check your mobile device’s user manual for more information!
Quick Recap:
In this guide, we’ve learned that when a Belkin wireless charger not working, the best solution is to power cycle the device and reboot your mobile phone.
If the issue persists, toggle ON and OFF the Airplane Mode on your device, and clean the charging surface!
Read Next: Belkin n300 WiFi Range Extender Orange Light? Know How to Fix!
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.