Best AT&T Weak Signal Solutions That Works!

Do you get irritated with poor communication signals in your area? We have the best AT&T weak signal solutions that work, so you don’t have to deal with it.

Imagine having the urgent need to call someone, especially during emergencies, and getting no signal!

That is why nothing is more important than getting all the proven ways to solve your weak signal problem.

Let’s see how it works!

To fix your AT&T weak signal, you can change your phone’s settings, such as turning on WiFi calling and selecting AT&T manually as its carrier.

Resetting your network settings can also help, but getting a signal booster from AT&T is the best way to improve the signal in your home.

The Causes And AT&T Weak Signal Solution

There are a lot of factors that can result in AT&T’s low signal strength.

You will deal with network congestion, structures obstructing the network’s transmitters, and your distance from your local cell tower. 

Try checking these conditions to figure out what causes your AT&T low signal strength:

✅ Overloaded network

Network congestion is at the top of the list. This usually occurs when the network is overloaded with traffic.

In this instance, the network usually distributes a lower signal to accommodate all those devices being used simultaneously.

✅ Signal Interference

Structures blocking the signals from reaching you are the culprit. Thick walls, large trees, and enclosed areas can block the signal.

✅ Using the wrong settings

Mobile users usually prefer a 4G LTE network for its faster speed and better performance. However, the influx of 4G users results in a poor signal due to network traffic and signal sharing.

✅ Bad coverage in your area

Your distance from your local cell transmitters and even the simple terrain of your surroundings might affect your cellular signal. Your cell signal may also get worse due to your area’s unfavorable weather conditions. 

Top Ways How Can I Boost My AT&T Cell Signal

To boost your cell signal quickly, we recommend switching off Bluetooth, Wi-Fi, and NFC on your device.

You can also restart your phone to refresh your connection with the tower to improve the signal it’s receiving.

In case these simple solutions don’t work, there are more advanced steps that you can try.

These will surely help you improve the signal your phone is receiving from AT&T:

Solution #1: Move to a Different Location to Find the Best Coverage

Changing your position and discovering the perfect spot will give your phone the best signal strength.

You can move around your house to identify the location where your phone can receive the signal for the best coverage.

Here’s how to find the best location in your home for improved signal coverage:

1. Get away from obstructions such as walls.
2. Go nearer big windows for fewer obstructions.
3. Try moving up floors to get a better signal.
4. Locate the nearest cell tower in your area using OpenSignal or AntennaSearch.
5. Move to the side of your house where the tower is located.

Pro Tip: If you’re using your phone, we recommend turning on Location services so OpenSignal and AntennaSearch can determine your area quickly.

Solution #2: Enable WiFi Calling on Your Phone

Despite receiving a weak or no cell signal at all, getting in touch with the outside world is still a part of our daily tasks.

In case of this signal issue, you may want to try enabling your device’s WiFi calling to send those important text messages and make necessary phone calls.

Turning on WiFi calling will allow your phone to use your internet for calls even if you don’t have a cellular signal. This makes calling possible even if you have a weak signal in your home.

Here’s how you can activate the WiFi calling feature on your phone:

On iPhone:

1. Open the Settings app on your phone.
2. Tap on the Phone menu.
3. Select the WiFi Calling option.
4. Toggle the WiFi Calling switch to the On position.

On Android:

1. Go to the Phone app on your phone.
2. Select the More option on the top right.
3. Tap on Settings.
4. Select Calls.
5. Tap on WiFi Calling to turn it on.

Note: To make sure that WiFi calling is activated on your phone after changing the settings, restart it.

Solution #3: Manually Switch to a Different Network

Network congestion usually occurs when a lot of mobile users decide to use their devices at the same time.

Most users will surely prefer to use the 4G network due to its higher speed and increased performance level.

However, with the influx of users, you will not likely get the expected result from a 4G network.

In that event, it is suggested that you switch to a 3G network momentarily and see if that improves the signal situation of your phone. 

To help you with this, try following these easy steps on your device:

On iPhone:

1. Open the Settings app on your phone.
2. Navigate to Mobile Networks.
3. Select Mobile Data Options.
4. Tap on Voice and Data.
5. Choose 3G.

On Android:

1. Go to your phone’s Settings.
2. Select Mobile Networks.
3. Tap on Preferred network type.
4. Select 3G or CDMA only.

Note: As long as you’re not planning to use data, forcing your phone to use the 3G network should not pose a problem.

Solution #4: Manually Select Your Carrier on Your Phone

Moving to a different place will sometimes pick up a weak signal. Others are unfortunate even to have a total signal loss. This is mostly the case for travelers.

However, if you’re not traveling and continue to experience this at home, you can select your carrier manually can resolve it.

Here’s how to choose the carrier on your phone’s settings:

On iPhone:

1. Open your phone’s Settings.
2. Tap on Cellular, then Network Selection.
3. Set the Automatic option to Off.
4. Wait a few moments for the list of carriers to appear.
5. Choose AT&T from the list.

On Android:

1. Go to your phone’s Settings.
2. Select More or More Settings.
3. Tap on Network operators.
4. Select Network operators to get the list of available carriers.
5. Choose AT&T.

Solution #5: Reset Your Phone’s Network Settings

Resetting the network settings is one of the ways that you can fix AT&T’s weak signal issues on your phone.

It’s a handy feature that resets your network settings like your cellular connection, WiFi, and Bluetooth.

An advantage of using this solution is that it does not remove your phone’s other settings and data, making it easier to use your phone after the reset process.

It should allow your phone to reconnect with your carrier and get new settings that can improve the signal strength it receives.

Here are the steps to reset the network settings on your phone:

On iPhone:

1. Open your iPhone’s Settings.
2. Scroll to General and tap on it.
3. Tap on Reset iPhone
4. Tap on Reset.
5. Select Reset Network Settings.

On Android:

1. Go to your phone’s Settings app.
2. Navigate to the System option.
3. Choose Reset options.
4. Tap on Reset WiFi, Mobile, and Bluetooth.
5. Select Reset settings to confirm.

Note: Resetting your phone’s network settings won’t remove your personal data, apps, photos, and other files. 

However, you will need to remember your WiFi password to connect again.

Solution #6: Get a Signal Booster for Better Indoor Coverage

Getting a signal booster is one of the most effective solutions when the other steps fail to resolve the weak signal issue with AT&T.

Setting it up will translate to better indoor coverage, so you don’t have to go outside whenever you want to make a call or send a message.

A signal booster will also offer more stable data speeds and connection if you’re using your phone to access the internet.

It will guarantee a robust connection throughout your home, so you don’t have to worry about your signal.

Here’s how to get AT&T’s signal booster for your home:

1. Go to the AT&T Store and look under Accessories.
2. Get the AT&T Cell Booster or Cell Booster Pro.
3. Download the Cell Booster app and sign in with your AT&T account.
4. Set up your Cell Booster by entering your location.
5. Connect the Cell Booster to your router via an Ethernet cable.

Note: The AT&T Cell Booster uses the internet and creates a 4G cellular signal to which your phone can connect.

These are the solutions that will eliminate your weak signal issues with AT&T.

If you suspect that it’s a hardware issue with your phone, you can attempt to reset it and check if you get an improvement in the signal. You can also contact AT&T customer support for additional assistance.

Bottom Line

Now, you’re more than ready to fix those connection issues with the best AT&T weak signal solution that works!

Just follow the steps provided for you, and you’ll have improved signal quality in no time.

Read Next: AT&T Mobile Network Not Available? – Complete Fix Guide