Your amaysim Can’t Receive Calls? (Fix Now & Talk Again)

Are you wondering why amaysim can’t receive calls? Well, you’re not the only one!

Being unable to receive and send amaysim calls is typically related to issues with the SIM card or the network settings of the amaysim mobile.

This guide will help you decipher your problem quickly by reviewing all possible causes and providing practical troubleshooting steps to apply.

If amaysim cannot receive calls, check if the SIM is inserted properly and power cycle the amaysim mobile. If the issue persists, configure the APN settings of the device.

Let’s learn more!

Why amaysim Can’t Receive Incoming Calls?

If not adjusted properly, the amaysim might stop receiving calls due to a fault with the SIM card or issues with the APN settings. 

Typically, incoming and outgoing amaysim calls function identically, so determine if you can send calls before proceeding.

Here’s what could prevent your amaysim mobile from receiving calls:

Note: If you’re also unable to send outgoing calls, there’s an issue with the reception!

amaysim Can’t Receive Calls – Quick & Easy Solutions

Note: Your device’s cellular reception status is reflected on the SIM indicator at the top right or left part of the page, so observe this throughout this guide.

1. Reinsert the amaysim Card

Reinserting the SIM card is a viable resolution to connectivity issues with the amaysim cellular connection of your device. 

The disappearance of calls could happen due to cellular reception issues caused by improper connection with the SIM card chip.

Follow these steps to reinsert the amaysim of your mobile device:

1. Locate the SIM tray on the side panel of your device.
2. Insert a SIM tool into the pinhole and pull out the tray.
3. Next, eject the amaysim SIM card from the tray’s slot.
4. Clean the SIM tray out of dust, debris, and obstructions.
5. Reposition the amaysim SIM into the tray and reinsert it.

How to Inspect a SIM Card for Defects?

You must be aware of potential defects or defects with the amaysim card, as this could lead to congestion of the cellular signal, frequent outages, and loss of reception. 

So, remove the SIM card from your mobile and inspect for the following:

• The amaysim is scratched or torn on one side.
• The amaysim does not match the mobile’s tray.
• The amaysim’s corners are slightly broken off.

Alert: Contact amaysim for defects or incompatibility of the SIM card.

2. Reboot & Power Cycle the Mobile

You can address issues with the amaysim mobile by rebooting the system and power cycling the device.

Inconsistency in the power supply or particular functionality modes could prevent the device from establishing a secure cellular connection to the amaysim network.

Here’s how to reboot and power cycle your mobile device in easy steps:

1. Hold the Power button on the side of your device.
2. Wait until the power menu appears on your screen.
3. Then, select the “Power Off” tile from the options.
4. Once powered off, connect the device to a charger.
5. Wait 60 seconds and hold the Power button again.
6. After the device is working, attempt to accept calls.

Note: Do not attempt to use the device while on the “Low Power” or “Lower Battery” regime!

3. Adjust the amaysim APN Settings

Incorrect APN settings could prevent your device from establishing a secure connection with the amaysim network and, therefore, receiving calls. 

Android and iOS devices have a system APN configuration that allows for re-adjusting the provider’s cellular connection preferences.

amaysim Correct APN Configuration
APN Option	amaysim APN
Name	Amaysim Internet
APN	yesinternet
Proxy	Empty
Port	Empty
Username	Empty
Password	Empty
Server	Empty
MMSC	Empty
MMS proxy	Empty
MMS port	Empty
MMS protocol	WAP 2.0
MNC	02
MCC	505
Authentication type	PAP
APN type	default

Note: The APN options that are not required are typically optional for particular services!

4. Register amaysim as the Default Provider

Most Android devices and all iPhones have a carrier adjustment setting, allowing for manual selection of the preferred network. 

So, the next step is to find the provider selection option in your device’s settings and specify “amaysim” as the default cellular carrier provider and network.

Set “amaysim” As the Default Provider (Android):

1. Open the “Settings” menu on your amaysim Android device.
2. Tap on “More Networks” (“More Settings” on older models.)
3. Tap on “Mobile Networks” and select “Network Operators.”
4. Scroll down and locate “amaysim” within the network listings.
5. Select the provider and tap on the “Confirm” button below.

Set “amaysim” As the Default Provider (iOS):

1. First, go to “Settings” → “Mobile Data” → “Mobile Network.”
2. Deactivate the “Automatic” feature in your device’s options.
3. Wait for the list of available providers to appear on the page.
4. Scroll down and locate the “amaysim” provider in the options.
5. The iPhone will automatically connect to the amaysim network.

Once the default network carrier is successfully adjusted on your mobile device, it may take up to a few moments until the device reestablishes reception. 

Reminder: You can track the connectivity status of your amaysim mobile by inspecting the SIM indicator on the top right or left