Wondering what causes “no command Oculus Quest 2”? Well, you have found the answer!
The “No Command” error repeatedly occurring on your Oculus Quest headset is often related to faults in the Wi-Fi connectivity or the device’s firmware version.
This guide will provide all the necessary information for understanding and troubleshooting the issue as efficiently as possible!
If the Oculus Quest keeps saying “No Command,” reboot the unit by holding the physical power button for 10-15 seconds and restart through the bootloader menu.
There is much more to discuss, so let’s get started!
What is the Oculus Quest 2 No Command Error?
Whenever the Quest headset enters the “No Command” condition, it is in a state where it won’t respond to any commands or inputs from the user.
The VR headset can enter the no command mode while playing, during firmware updates, or simply due to misconfigured system settings.
There is no particular condition for the occurrence of the “No Command” mode on Oculus, but it can result in suppressed Oculus functionality.
In fact, some refer to the no command mode as “bricking” the Oculus Quest headset since the condition is the same as any other system error.
Here’s why “No Command” appears on Oculus Quest 2:
This is what could cause the occurrence of the “No Command” error on Oculus Quest 2.
To investigate the issue further, proceed with our troubleshooting guide and fix your headset!
No Command Oculus Quest 2 – Quick & Working Solutions!
Tip: Follow the steps in consecutive troubleshooting order!
1. Hard Reset the Quest 2 Headset
The most straightforward resolution to underlying issues with the headset causing the “No Command” error is to force the headset to hard reboot.
Thanks to the built-in power button on the top panel, activating the reboot is as easy as holding the button until the device turns off.
Follow these steps to hard reset the Quest 2 headset:
- Connect the Oculus headset to a charger or a charging station.
- Locate the Power button on the top panel of the Quest device.
- The next step is to hold the Power button for 10-15 seconds.
- Wait for up to 30-40 seconds while the Oculus is powered off.
- Hold the Power button on the top panel to turn on the device.
- Check if the “No Command” still occurs on the Oculus Quest 2.
After completing the hard reset, check whether the headset’s lenses illuminate and launch an application to determine if the “No Command” error is still there.
Remember to use the headset for at least 60 seconds with a running game or an app to find out whether the error code exists.
Alternative: Hold the Power button and select “Shutdown” from the boot menu!
2. Restart via the “Bootloader” Menu
If the “No Command” error still interrupts the functionality of the Oculus headset, the next step is to reboot the Oculus system via the bootloader options.
The Oculus Quest 2 headset has an in-built bootloader menu in its operating system, allowing emergency system restarts.
How to Access the Bootloader?
To access the bootloader menu, all you have to do is press the “Power” and “Volume Down” buttons on the side of the device for 5-10 seconds.
It may take up to 30 seconds until the Oculus Quest 2 loads into the bootloader, and you can navigate through the emergency menu.
How to Reboot from Bootloader?
Once in the bootloader menu of Oculus, you can choose from multiple emergency options.
Next, equip the headset, highlight the “Boot” option using the Oculus controller, and select by pressing the “Power” button.
The Oculus Quest headset will power off for 20-30 seconds.
Warning: Selecting the “Factory Reset” option in the bootloader will erase all your data!
3. Update the Firmware of Oculus!
Another possible cause for the “No Command” error on your Oculus headset is updating the firmware to the current version.
To gain access to the newest Oculus features and receive the latest hotfixes, it is necessary to apply the newest update periodically.
- The Oculus must be connected to Wi-Fi to update the firmware version!
Here’s how to update the operating version of the Oculus head in easy steps:
- Open the Oculus mobile app on the Android or Apple iOS device.
- Next, navigate to the homepage of the Oculus application and wait.
- Once the “Firmware Update” prompt occurs, press “Install Update.”
- Wait until the latest version available for the VR headset is uploaded.
Remember that firmware updates are only available for Oculus while the headset is connected to a reliable Wi-Fi network.
A potential issue or drop in the connectivity may prevent the Quest device from recognizing and uploading the latest firmware update available.
Tip: Always keep your Oculus Quest 2 up to date!
4. Clear the Oculus Proximity Sensor
If the proximity sensor has been obstructed for too long, the headset will enter “No Command” mode until the obstruction is removed from the sensor.
Hence, the next step is to verify that no debris or dust accumulation is covering the sensor and interrupting the headset’s functionality.
How to Find the Oculus Proximity Sensor?
The proximity sensor of the Oculus Quest 2 can be found between the lenses on the inner part of the VR headset.
The sensor typically rests above your nose after putting on the headset and wakes the display of the VR headset automatically once the system is started up.
How to Clear the Oculus Proximity Sensor?
Maintaining the proper condition of the proximity sensor is required for optimal VR functionality.
Hence, use a slightly wet cloth to clean the sensor and collect all dust and debris preventing the sensor from illuminating the lenses and waking the display.
Another significant factor in the Quest headset’s functionality is to verify that the lenses are not obstructed by anything.
The “No Command” error could result from a nonfunctional “Guardian” feature controlled by the lenses and the proximity sensor on the headset.
Note: Damaged or defective proximity sensors must be reported to Meta Customer Support!
5. Reconnect the Headset from the App!
Another effective method to reset the “No Command” mode on the Oculus headset is to re-add the equipment from the Meta Quest application.
The Quest mobile app provides configurations and settings that can entirely re-design how the Oculus Quest headset responds and functions.
How to Re-Add Oculus Headset From the App?
- Open the Oculus app on your mobile Android or iOS device.
- Tap on your Oculus headset icon from the app’s homepage.
- Choose the “Delete Device Data” option from the settings.
- Finally, re-add the headset by pressing “Add New Oculus.”
How to Re-Add Oculus Controller From the App?
- Open the Oculus app on your mobile device.
- Go to “Menu” and tap on the “Devices” option.
- Tap the image of your current Oculus headset.
- Finally, tap “Controllers” > “Unpair Controller.”
Note: An unpaired controller can be re-added by pressing “Add New Controller” at the top!
6. Perform a Factory Reset on Oculus!
If the “No Command” error screen persists, it is strongly advised to force a factory reset on the system of the Oculus headset.
The “No Command” error state of your Quest will stop appearing after erasing all system files and configuration on the headset via the factory reset process.
Here’s how to factory reset Oculus Quest 2 with no command in easy instructions:
- Press and hold the power button on the Oculus until it powers off.
- Locate the “Volume Down” button on the side panel of the headset.
- Next, hold the “Power” and “Volume Down” buttons simultaneously.
- Equip the headset and wait for the factory reset screen to appear.
- Then, highlight the “Factory Reset” option using the right controller.
- Follow all the on-screen instructions to complete the system reset.
After completing the factory reset, all of Oculus’s settings will be reverted to their factory value, and you will be prompted to complete the initial device setup.
All instructions for finalizing the reset and setting up the headset will be shown on the headset, so set up your headset initially!
Warning: Data loss after a factory reset can’t be recovered!
The “No command Oculus Quest 2” issue can be fixed by rebooting the VR headset and verifying that all equipment is charged.
If the error code persists, reconnect the headset from the Oculus application, clear the proximity sensor, and factory reset your VR Quest.
Follow our blog for more!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.