Motorola Baby Monitor Not Turning On? (Simple Solutions!)

If you have a Motorola baby monitor not turning on, don’t panic. We have the solution!

The Motorola baby monitor is an impressive device that provides a close-up view of your baby and monitors the room temperature, but it’s not perfect.

If your Motorola baby monitor is not turning on, the most common culprit is low or dead batteries. To fix this, ensure the power adapter of your baby monitor is properly connected or replace the batteries. 

Terrific, now, let’s get down to the nitty-gritty.

Motorola Baby Monitor Not Turning On – 

Let’s discuss the best methods to fix a non-functional Motorola baby monitor.

We also added some tips to prevent it from happening again. 

#1: Check the Power Adapter of Your Baby Monitor

Check the power adapter if your Motorola baby monitor won’t turn on.

Loose or faulty power adapters often result in power loss and prevent your device from turning on.

To fix this, ensure it’s properly connected to the power outlet and the baby monitor. 

Here are the steps to do this:

1. Unplug the power adapter from the power outlet and baby monitor. 
2. Inspect the power adapter for signs of damage.
3. If you see cracks, burns, or fraying, replace the power adapter with a new one.
4. Plug it back into the power outlet and baby monitor. 
5. Turn on your device and see if it works. 

Note: The voltage and power requirements of the power adapter should match those specified in the Motorola baby monitor’s user manual. 

#2: Check and Replace the Batteries

Make sure to check the batteries if your device runs on them and is not working.

Low or dead batteries often cause power issues and prevent your device from turning on. To fix this, replace the batteries with new ones. 

To do this, follow these steps:

1. Open the battery compartment of your Motorola baby monitor. 
2. Remove the old batteries and check for signs of damage.
3. If you see leaks, corrosion, or swelling, replace them with new ones.  
4. If the batteries are fine, use a multimeter or battery tester to measure the voltage. 
5. If the voltage level is below 1.2 volts per battery, replace the batteries.
6. Insert the new batteries into the compartment and close it.

Tip: Ensure the battery compartment is clean and corrosion-free. If you see any corrosion, clean it before inserting new batteries.   

#3: Plug It Into a Different Power Outlet

Faulty or loose power outlets are another reason your device loses power and won’t turn on.

To fix this, plug your Motorola baby monitor into a different power outlet you know is working.

To do this, follow these steps:

1. Unplug the power adapter from the current power outlet. 
2. Plug it into another working power outlet nearby. 
3. Ensure the power adapter is firmly connected to both the outlet and baby monitor.
4. Turn on your device and see if it works. 

Note: If you plug multiple devices into the same electrical circuit, use surge protectors or various outlets to avoid overloading it. 

#4: Power Cycle Your Baby Monitor by Discharging It

Another method to fix a Motorola baby monitor screen not turning on is power cycling your device by discharging it.

The process involves draining the residual power from your device and then recharging it.

This resets your baby monitor and fixes glitches that prevent it from turning on. 

Here are the steps to do this:

1. Unplug the power adapter from the power outlet and baby monitor. 
2. If your device has batteries, remove them from the battery compartment. 
3. Press and hold the power button for at least 10 seconds.
4. Release the power button and wait for a few minutes.
5. Plug the power adapter back into the power outlet and baby monitor. 
6. If your device has batteries, insert them back into the compartment. 
7. Turn on your device and see if it works. 

Note: The discharge process usually takes time, so be patient. The monitor will not show any activity during this period. 

#5: Inspect the Power Cable for Signs of Damage

If none of the above solutions work, inspect the power cable that connects the power adapter to the Motorola baby monitor for signs of damage.

A damaged power cable often loses power and won’t turn on, so look for cracks, burns, or fraying. 

To do this, follow these steps:

1. Unplug the power adapter from the power outlet and baby monitor. 
2. Inspect the power cable for signs of damage. 
3. If you see cracks, burns, or fraying, replace it with a new one. 
4. Plug the power adapter back into the power outlet and baby monitor. 
5. Turn on your device and see if it works. 

Pro Tip: Store the power cable neatly to prevent bends, kinks, and knots that lead to damage over time. 

#6: Make Sure the Power Button Is Working

If your Motorola baby monitor still won’t turn on, check the power button.

A stuck, jammed, or broken power button prevents you from turning on your device.

To fix this, press the button multiple times and see if it starts working. Then, get it repaired or replaced if it’s not. 

To check if the power button is working, follow these steps:

1. Press and release the power button several times.
2. See if it responds and feels loose or wobbly.
3. If it doesn’t respond, it means it’s broken or damaged. 
4. Contact Motorola customer service or a professional repair service to fix it. 

When pressing the power button, listen for a clicking sound or feel for tactile feedback.

Also, clean the button and its surroundings to remove dirt or residue.

Here’s how to do this:

1. Turn off your Motorola baby monitor and unplug it.
2. Gently clean the button with a soft cloth dipped in rubbing alcohol.  
3. Allow the button to dry completely.  
4. Plug in the device and turn it on. 

Note: Do not apply too much pressure or moisture to avoid damaging the power button.

#7: Clean the Unit’s Power Port

There are instances when dust, dirt, or debris can accumulate in the power port.

Whenever this happens, it will disrupt the power delivery to your unit and not allow it to turn on.

You’ll be lucky if it’s the only thing that happens since your monitor will also be prone to short circuits and other electrical issues. 

To clean your Motorola baby monitor’s power port, follow these steps:

1. Unplug the power adapter from the wall outlet to ensure no power is running.
2. Remove the other end of the power cable from your unit.
3. Use a can of compressed air or a soft brush to clean the power port.
4. Use a cotton swab dipped in rubbing alcohol to wipe the inside of the power port.
5. Let the contacts dry completely.
6. Plug the power adapter back into the unit.

Note: Corrosion can also affect your baby monitor’s connection, so if you see signs, make sure to clean it thoroughly.

#8: Press Your Device’s Reset Button to Initiate a Reset

If your Motorola baby monitor will not turn on even after working on these other solutions, you’ll have to consider resetting the device itself.

It will allow you to restore your baby monitor to factory settings and get rid of any bugs or glitches that are preventing it from turning on.

To reset your baby monitor, follow these steps:

1. Find the reset button on your device.
2. It’s usually a small hole that you can access using a paper clip or needle.
3. Unplug the unit from the power outlet.
4. If your baby monitor has batteries, remove it.
5. Using a paper clip or needle, press the reset button hole.
6. Press on it for at least 10 seconds.
7. Release the reset button and wait for at least 2 minutes.
8. Plug the power cables into the unit and see if it turns on.

Sometimes, your baby monitor will not turn on because your home’s circuit breaker has tripped or failed.

If you suspect this, you’ll need to find your home’s circuit breaker box and check for any tripped switches.

If you see one, reset it by flipping it off and on.

If these solutions still don’t work, you need to contact a professional electrician to check your home’s electrical system.

Quick Recap

If your Motorola baby monitor not turning on, you’re dealing with a power issue.

Check the power adapter and cables to ensure they’re not malfunctioning and delivering power to your baby monitor.

If your unit has batteries, replace them with fresh ones so it turns on.

To read up on more guides and tips about your Motorola baby monitor, visit our blog!