Is your Motorola baby monitor night vision not working? This is not a cause for concern!
The vision is one of the most important functionalities of the monitor, and when it’s not working, the device is pretty much useless.
Hence, in this guide, we’ve got you covered with the best fix solutions to get your Motorola baby monitor’s night vision up and running.
The night vision fault on the Motorola baby monitor is usually caused due to too much lighting in the area, which may prevent the mode from triggering. Ensure there is no ambient or lighting in the front field view of your Motorola baby monitor.
Let’s now move further and unwrap some more information!
Motorola Monitor Night Vision Not Working – Why?
If your baby monitors night vision is not working, there is a good chance it could be due to the bright lighting.
This is because the night vision mode is only triggered whenever there is no ambient or lighting in the way of the cam thus, the facing direction must be completely dark.
However, in some cases, even if the camera field has no ambient or lighting, the night vision still doesn’t work.
Therefore, it’s essential for you to have an idea of all possible causes before doing any troubleshooting.
Here’s a list of causes of Motorola baby monitor night vision not working:
Those are the possible causes that may impact the night vision of your Motorola camera, and luckily, we’ve managed to solve all of them.
So, let’s jump straight to the troubleshooting guide!
Motorola Baby Monitor Night Vision Not Working – Easy Fix
Tip: Follow the solutions in chronological order!
1. Perform a Power Circulation
Start by doing the most basic and effective solution, which is performing a power circulation on the monitor and camera by rebooting both devices.
This will help clear out all temporal software bugs and glitches that could prevent the camera’s night vision mode from working correctly.
To power cycle your Motorola baby camera, follow the steps below:
- Disconnect the camera from the power source.
- Disconnect the baby monitor from the power.
- Then, leave the units turned off for 2 minutes.
- Then, turn both devices on and test the mode.
When ready, check to see if the night vision on the baby monitor is working fine.
If the problem persists, continue reading the guide for more troubleshooting…
2. Inspect the Room Lighting
The next crucial step is to inspect your baby’s room lighting condition!
It’s essential to remember that if the room is too ambient or bright or there is light in the field of view of the camera, it could cause the night vision to develop blind spots on the monitor screen.
Therefore, ensure the room is dark by looking for and removing any light sources from your camera’s lens.
Here are some factors that can affect night vision:
- Night or garden lights
- Lens dust accumulation
- Moonlight or starlight
- Infrared light sources
- Shadows and obstacles
After inspecting and ensuring that the room is entirely dark and there is no chance of light and reflection in the field view of the camera, test if the night vision is working.
If possible, we recommend relocating your camera to a different room (during the night) and testing the vision.
Tip: Try using blackout curtains to create the ideal conditions for night vision!
3. Reset the Camera’s Night Vision
When the baby monitor’s night vision stops working, a simple reset to the camera may help resolve the problem.
This is one most effective solutions that will help you clear out night vision issues and restore the camera’s functionality.
Here’s how to reset the Motorola Baby camera night vision mode easily:
- First, ensure that the baby’s room is entirely dark.
- Hold your mobile phone and turn on the flashlight.
- Directly shine the flashlight into the camera’s lens.
- Continue to hold the flashlight for about 60 seconds.
- Turn off the flashlight and then wait a few minutes.
- Then, test if the baby monitor’s night vision is working.
Reminder: If resetting the camera night vision functionality doesn’t help, double-check and ensure that no light, ambient, or reflections are coming in the field view of the camera.
Monitor Brightness Level?
If the baby monitor’s brightness level is too low or dim and it can’t switch to the night vision mode, you won’t be able to see the night mode display on the screen.
Hence, go to the display settings on the monitor, adjust the brightness level, and check for night vision.
Note: You can reset the night vision of your Motorola baby camera by using any light source!
4. Inspect the Camera’s Power Source
The next thing you need to focus on is the power sources of both your devices, as it’s directly related to the device’s performance.
So, check whether the power outlets are in order or use a different outlet to connect your camera and test whether the night vision mode will activate.
So, follow these steps to check the power source of your setup:
- Start by turning off the camera using the power button.
- Disconnect the camera’s power adapter from the outlet.
- Remove the power cord from the baby monitor camera.
- Wait for about 5 minutes, then plug the camera back in.
Tip: Try plugging your camera into a different outlet from another room!
Have a Battery-Powered Camera?
If you have a battery-powered baby monitor camera, a depleted or poor battery may affect the camera’s performance or prevent it from activating the night vision mode.
In this case, start by removing the camera’s batteries and then reinstalling them after a few minutes for refresh.
Note: You may need to install fresh batteries in your Motorola baby camera!
5. Test the Camera in a Different Room
If you’ve tried the above steps but the night vision is still not working, we recommend relocating the camera set up in a different room.
There is a good chance that the camera has trouble activating the night vision mode because of the room’s environment or lighting conditions.
If you can’t immediately recognize what’s causing the issue, perhaps relocating the camera to another room would suggest exactly what’s wrong!
Simply move your camera to a different room with fewer light sources and test again.
In case the night vision is also not working in a different room, then you’re dealing with a camera issue! If so, continue reading the next solution!
6. Factory Reset the Motorola Setup
If nothing worked out for you, the issue could be software-related.
In this case, a factory reset of your baby monitor and camera devices may be helpful.
However, use it only as a last resort.
The reset to your devices will permanently erase all data from the device and revert all settings to the default state.
This means that you’ll have to go through the initialization again!
How to Factory Reset the Motorola Baby Monitor?
- First, make sure the baby monitor is plugged in.
- Then, locate the Reset pinhole on the left side.
- Grab a sharp pin to reach into the pinhole freely.
- Insert the pin to reach the button and press it.
- Hold the Reset button until the monitor turns off.
- Shortly, the monitor will automatically power on.
How to Factory Reset the Motorola Camera?
- Ensure your baby monitor camera is turned on.
- Locate and press the “Pair button” from the side.
- Hold the button for approximately 20 seconds.
- Release the pair button when you hear a sound.
- After the red flashing light, the camera is reset.
When you are done with resetting both devices, re-connect both units back together and then check for night vision.
Ensure you are following the lighting requirements and test whether your camera’s night vision is working.
Also, we advise performing one last camera power circulation!
Note: For additional assistance, we recommend contacting Motorola Support.
Thus, when your Motorola baby monitor night vision not working, power cycle both units, remove any light sources, or reset the camera’s night vision functionality.
Moreover, test the camera in a different location and a different power outlet or factory reset both units.
Follow us for more!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.