Motorola Baby Monitor Battery Wont Charge? (Easy Fix)

If your Motorola baby monitor battery won’t charge, don’t worry. We got your back!

The Motorola baby monitor provides parents and caregivers with constant audio and video surveillance, so it’s very frustrating when it doesn’t charge.

The error often indicates issues with the power source.  

To get your Motorola Baby Monitor to charge, replace its batteries with fresh ones and plug it into a different outlet. You also want to reset both the parent and baby units simultaneously.

Awesome, let’s break it down completely!

Motorola Baby Monitor Battery Wont Charge – 10 Easy Solutions

We listed 10 easy solutions to get your Motorola baby monitor charging again.

They are arranged from easiest to most complex, allowing you to troubleshoot the issue step by step. 

1. Make Sure Your Baby Monitor is Securely Plugged In

Sometimes, a loose connection prevents your baby monitor from charging properly.

When you plug in the charger, the electrical connection isn’t solid, causing intermittent or no charging at all.

To fix this, ensure it is securely plugged into the power outlet and adapter.   

Here are the steps to do this:

1. Unplug your Motorola baby monitor from the power source. 
2. Check the plug or socket for dirt or damage. 
3. Plug your baby monitor back into the power source.
4. Make sure it fits snugly and firmly.
5. Check if the power indicator shows your device is charging.  

Note: Ensure that the power source is functional. Test it with another device or plug the baby monitor into a different outlet to rule out issues with the power source. 

2. Plug It Into a Different Outlet and Don’t Use a Power Strip

Some outlets or power strips do not provide enough voltage or current for your baby monitor to charge properly.

Motorola baby monitors are designed to work with standard power adaptors that provide around 5 volts and between 500mA and 1A current. 

If your power outlet does not meet these requirements, plug your device into a different one.

Here are the steps how:

1. Unplug your Motorola baby monitor from the current outlet.
2. Find another power outlet that is nearby and working. 
3. Plug your monitor directly into the new outlet. 
4. Avoid using any extension cords or power strips. 
5. Check if the power indicator shows your device is charging.

Tip: To find the precise voltage and current requirements for your specific Motorola baby monitor model, refer to the user manual or product documentation provided by Motorola. 

3. Inspect and Replace the Charging Cable

A damaged, frayed, or broken charging cable prevents your Motorola baby monitor from charging properly.

It also poses safety risks, such as overheating or electrical shorts.

Regularly inspect your charging cable for signs of wear and tear and replace it with a compatible one. 

To inspect and replace the charging cable, follow these steps:

1. Unplug your Motorola baby monitor from the power source. 
2. Check the charging cable or connector for signs of damage or dirt. 
3. If you see dirt, clean them with a soft cloth.
4. If they are damaged, replace them with a new cable compatible with the monitor.
5. Plug your baby monitor back into the power source. 
6. Check if your device is charging properly. 

Tip: Use the charging cable provided by Motorola or a certified, high-quality replacement. Avoid cheap or generic wires, as they don’t meet safety and performance standards.  

4. Clean the Charging Contacts

If the charging contacts are dirty or corroded, they prevent your Motorola baby monitor from charging properly.

Over time, dust and debris can accumulate on the contact points, leading to poor electrical connections. 

To ensure effective charging, clean the charging contacts periodically.

Here’s how to do this:

1. Turn off your Motorola baby monitor and unplug it from the power source.
2. Remove the battery cover and battery pack. 
3. Use a cotton swab dipped in rubbing alcohol to wipe the charging contacts gently.
4. Let the contacts dry completely before putting the battery pack and cover back on.
5. Plug your baby monitor back into the power source.
6. Check if it is charging properly. 

5. Replace the Batteries of Your Baby Monitor

If the Motorola baby monitor not charging issue persists, replace your device’s batteries with new ones.

Replacing the batteries is a relatively straightforward process that ensures your monitor gets enough power and charges properly. 

Here are the steps to do this: 

1. Turn off the Motorola baby monitor to prevent electrical issues. 
2. Locate and open the battery compartment on the back or underside of the device.
3. Take out the old batteries from the compartment.
4. Dispose of the old batteries properly according to local regulations. 
5. Insert the new batteries, following the correct orientation.
6. Close and secure the battery compartment, ensuring it’s properly sealed. 
7. Turn on the baby monitor to see if it’s working with the new batteries. 

Note: Always refer to Motorola's user manual or instructions for your specific baby monitor model. 

6. Reset Both the Parent and Baby Units of Your Monitor

Another recommended step is to perform a reset on both the parent and baby units of your Motorola monitor.

Resetting them helps eliminate any potential bugs or issues that cause problems with your device’s charging functionality. 

To reset the parent and baby units of your baby monitor, follow these steps:

1. Turn off both the parent and baby units. 
2. Unplug them from the power source.
3. Press and hold the Reset button on the back of each unit using a paper clip or toothpick.
4. Release the button after 15 seconds or when you hear a beeping sound.
5. Plug both units back into the power source and turn them on.
6. Check if they are paired and charging properly. 

If you continue to experience issues after resetting the parent and baby units, contact Motorola customer support or consult the manufacturer’s website for troubleshooting resources and assistance.

7. Re-pair Both Units and Check the Battery Levels

If your parent and baby units have been reset, re-pair them and check the battery levels.

Doing this will restore the communication and connection between them. Plus, assessing the battery levels ensures sufficient power for proper functionality. 

To re-pair the parent and baby units and check the battery levels, follow these steps:

1. Turn off the parent and baby units. 
2. Unplug them from the power source.
3. Press and hold the Pair button on the back of each unit for about 3 seconds.
4. Release the pair button when you hear a beep. 
5. Plug both units back into the power source and turn them on.
6. Check if they are paired and show the correct battery levels.

Note: Keep an eye on the battery health of both units. Over time, rechargeable batteries degrade, and it becomes necessary to replace them if they no longer hold a charge effectively. 

8. Update the Firmware of Your Baby Monitor

Periodically checking if firmware updates are available ensures your device operates smoothly and reliably.

It fixes bugs and errors that prevent your Motorola baby monitor from charging properly. 

To do this, follow these steps:

1. Connect your baby monitor to your computer using a USB cable.
2. Download and install the latest firmware update from Motorola’s official website. 
3. Follow the instructions on the screen to complete the update process. 
4. Disconnect your baby monitor from your computer. 
5. Check if the device is charging properly.

9. Use a Different Type of Battery (NiMH or Alkaline)

Some baby monitors work better with NiMH or Alkaline batteries than lithium-ion batteries.

If your device’s battery still doesn’t charge, experiment with a different battery type. NiMH and alkaline batteries provide more capacity in a higher current draw situation.

To use a different battery type, follow these steps:

1. Turn off your Motorola baby monitor and unplug it from the power source. 
2. Remove the battery cover and battery pack.
3. Replace the lithium-ion battery pack with a NiMH or alkaline battery pack.
4. Connect the wires to the connector plug correctly.    
5. Put the battery cover back on and screw it tightly.
6. Plug your monitor into the power source and turn it on.
7. Check if it is charging properly.

Tip: Ensure the new type of battery pack matches the specifications of your Motorola baby monitor. 

10. Perform a Factory Reset

Lastly, factory reset your baby monitor to clear bugs or problems causing the charging issue.

Your device will be restored to its original settings, so you will have to configure everything again once the reset is complete.

Here’s how to perform a factory reset:

1. Turn off the parent and baby units and unplug them from the power source. 
2. Press and hold the Reset button on each unit for about 10 seconds.
3. Release the button when you hear a beep.
4. Plug both units back into the power source. 
5. Turn them on and configure them according to your preferences. 

Note: This troubleshooting measure should only be done when you encounter persistent issues or want to return your device to its original settings. 

Quick Recap

A Motorola baby monitor battery won’t charge is typically related to power source problems.

To address this, replace old or damaged batteries with fresh ones or use a different type of battery like NiMH or alkaline. 

Learn more about Motorola baby monitors by visiting our blog!