In case you’re trying to find out how to connect two TVs to one DISH network receiver, we got it here for you! For this guide, we will be bringing you all the information that you need to do it!
To be able to connect two televisions to just one DISH receiver, you need to use a splitter in order to distribute the signals to different devices.
Before we get into that, why would one want to connect two TVs to one receiver?
Why Should You Connect Two TVs to One DISH Receiver?
A lot of people are trying to find out how they can connect two or more televisions to just one DISH receiver. But what are the reasons why you would do this? What are the pros and benefits that you can get out of it?
You’ll Save Money
One of the primary advantages of connecting or linking two televisions to one receiver is that you’ll be able to save money.
How can it save you money, you may ask?
Well, this is by not purchasing a second set-top box (STB) or receiver any longer. By doing this process, you can easily share the contents from TV 1 to TV 2 without any hassle!
Gain Control of What Your Children Are Watching
Another is that you will be able to control what other televisions are accessing. By linking two televisions to one receiver, you will not stress about what other people are accessing through the TV.
You hold the option to stop them from watching, as well as take control of what you want them to watch.
How Many Televisions Can You Use in One Receiver?
Other service providers only allow one television per receiver or set-top box. This is the reason why there are companies offering multiple secondary receivers for secondary televisions.
With the DISH network, though, they allow up to two televisions sharing one receiver. And, for this method, you would have to use a splitter to properly distribute the contents.
So, what is the right DISH network for two TVs with one receiver setup? What are the steps in connecting or in linking multiple televisions to just a single receiver?
How to Connect Two TVs to One DISH Network Receiver [ Steps ]
In doing this process, it is imperative that you know and understand all the things you need. Of course, it will involve a few devices; you wouldn’t be able to start if you don’t have them.
To start, you need the following:
- Three HDMI Cables
- HDMI Splitter
Now, let’s perform the process of connecting or linking two TVs to one DISH receiver.
Step #1: Prepare Your HDMI Cables
Before you do anything, you have to make sure that your HDMI cables are functioning properly.
If they’re broken or damaged, then it could spark a problem; most likely, the distribution of signals and receptions might not work.
So, double-check your HDMI cables and look for any splits, cracks, cuts, etc.
Step #2: Position the Splitter
After that, the next thing you want to do is to position the splitter. Make sure that you position it at a location where its distance is equal to both televisions.
When that’s all done, we now have to go through the process of connecting or linking them together.
Step #3: Plug the HDMI Cables into the Back of the Receivers
For this process, take one of the HDMI cables and plug it into the back of the receiver. Then, the next thing you have to do is to take the other end and insert it to the “IN” port of the splitter.
NOTE: It’s important that you plug it into the “IN” port, not the “OUT” port.
Step #4: Plug the HDMI Cables Into the TV
After that, the setup is halfway done. What happened is that you directed your receiver to distribute data to the receiver.
Then, what you have to do next is to plug in the remaining two (2) HDMI cables to the back of the televisions. Make sure that you’re aware of where you plug it (e.g., if it’s on HDMI 1, HDMI 2, etc.).
Step #5: Connect it to the Splitter
Lastly, connect the remaining unplugged HDMI ends from the television to the “OUT port of the splitter.
What this does is it readily distributes data from the receiver to both televisions.
Step #6: Toggle the Input
Once you’re done doing that, the next thing you want to do is to toggle the input to see if you’re on the correct one.
This is a preventative measure so that you know you are on the right track. A lot of people forget to check their input and immediately jump to the conclusion that it’s not working.
And when you finish that, you should be able to share one receiver to two television setups!
Read Next: How to Get Dish on Demand without Internet?
I Tried the Method but It’s Not Working, What Should I Do?
Were you able to follow the 6-step process correctly? Are you sure that you are currently on the correct input for both your televisions?
If you did not deviate from the process in any way, then, the problem might be with the splitter. Not all splitters are created equally, and therefore, some splitters have defects.
What you have to do in this case is to test out a different splitter. From there, take a look and see if it makes a difference.
Several televisions have HDCP, short for high-bandwidth digital content protection. It’s the functionality that protects digital copyrighted content from being accessed on various devices.
So, this is another thing that you want to take a look at. There are multiple ways of bypassing this anyways, you’ll find tons of them online.
Contact A Local Professional or Expert
If you find it a bit of a nuisance and you don’t want to try anything else further, reach out to a local technician or professional about it.
Tell them what your dilemma is, or, better yet, have them visit your location and allow them to take it from there.
Who knew that the way to connect two TVs to one DISH receiver only requires a splitter?
This single device can help you distribute content to multiple televisions in your household without the need to purchase a secondary set-top box (STB) or receiver!
A lot of you might have found it impossible to do, but the process of how to connect two TVs to one DISH network receiver is actually easy.
Even if you are not experienced in doing it, you will understand and comprehend it! As long as you have the right set of tools, you will easily be able to do it!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.