Are you also facing the casting error Oculus Quest 2? Be sure that you’re not the only one!
With an Oculus Quest 2, you can cast content from your VR headset to computers, TVs, and phones with compatible software.
However, many Quest 2 users have been encountering the “Casting Error,” so in this guide, we’ll uncover what’s causing it and how to fix it effectively!
To resolve the Oculus VR headset casting error, verify that both devices are on the same WiFi and ensure the network is accessible. Next, update the Oculus Quest system, and if nothing helps, perform a factory reset.
Let’s unwrap everything chronologically!
Understanding the Oculus Quest 2 Casting Error!
The “Casting Error” on your Oculus Quest 2 may appear due to numerous factors, so it’s best to check the potential suspects for such an error.
Here’s a complete list of everything that may be causing the casting error when you attempt to share content from your headset to a destination:
Those are the possible causes for the “Casting Error” on your Oculus Quest 2, and to resolve the issue in minutes, proceed with the solutions below.
Without further ado, let’s get straight at it!
6 Working Ways to Fix the Casting Error Oculus Quest 2?
Tip: Try the troubleshooting solutions in order!
1. Connect to the Same WiFi Network!
The first and fundamental requirement for establishing screencasting from Oculus Quest to any other device is the WiFi network.
More specifically, whether both devices are connected to the same WiFi or using different internet sources prevents the casting feature.
For instance, if you’re attempting to cast your content to a television, you must verify that your Oculus Quest and TV are connected to the same WiFi.
So, when you open the casting menu on your Oculus, your TV will be there as long as the device is discoverable on your network.
How to Connect Oculus Quest 2 to WiFi?
- First, turn on and equip the Quest VR headset.
- Then, press the Oculus button on the controller.
- Point the trigger towards the WiFi icon and enter.
- From there, select your home WiFi and connect.
If you’re already connected, we strongly recommend to “Forget” the WiFi and then re-discover and connect from scratch.
This method will refresh the connection, and hopefully, you’ll be able to establish the casting session on your device without interruptions.
Info: To connect a phone, open the Settings and go to “Wi-Fi” or “Network & Internet.”
2. Optimize & Uplift Your WiFi Network
The “Casting Error” on your Oculus Quest 2 may appear when the destination device can’t be accessed from the network.
In that set of thoughts, when your internet or WiFi is going offline or is currently slow, you may encounter the casting error, or your device won’t appear in the menu.
So, we’ve prepared a handful of quick and effective ways to identify issues with your WiFi or broadband and troubleshoot any inconsistencies.
Here’s how to inspect and uplift your broadband internet and WiFi network:
- First, perform a free online internet test for the record.
- Power cycle the router by unplugging it for 30 seconds.
- Reconnect the service cable (Ethernet, Coax, or Optical).
- Shorten the proximity between your router and devices.
- Move the router to a more centralized and elevated spot.
- Unpair all of the unused devices from the WiFi network.
When you’re ready with the tips for internet optimization, run another speed test to determine if your broadband is now better performing.
In addition, remember to verify whether your WiFi is accessible by attempting to connect a secondary device to the network and test your internet.
Important: To prevent bouncing from WiFi to Mobile Data automatically, make sure to disable the cellular data on your mobile.
3. Enable the Bluetooth and Location!
If you’re attempting to cast content from Oculus Quest 2 to a mobile device, it’s essential to ensure that the Bluetooth and Location features are enabled.
Thus, if your phone’s permission is disabled, you may not be able to cast, or your device will not be discoverable.
How to Enable Bluetooth on Android?
- From the main screen, go to Settings.
- Scroll down to locate the “Bluetooth.”
- Tap on the “Bluetooth” feature toggle.
How to Enable Bluetooth on Apple iOS?
- From the home screen, go to Settings.
- Then, tap on the “Privacy & Security.”
- Turn on the Bluetooth for your apps.
How to Enable Location on Android?
- From the main screen, go to Settings.
- Then, tap on the “Location Access.”
- Switch “Access to my location” ON.
How to Enable Location on Apple iOS?
- From the main screen, go to Settings.
- Then, enter the “Privacy & Security.”
- Turn the “Location Services” toggle.
When your Bluetooth and Location features are enabled, you may try to cast from your Oculus Quest to the destination device again.
If the “Casting Error” still appears, you may need to try alternative solutions, so continue reading the guide further.
4. Update the Oculus Quest Firmware
Sometimes, the “Casting Error” on your Oculus Quest 2 appears due to outdated firmware OS, and you may need to trigger an update manually.
However, your Oculus headset is not the only instance involved in the casting establishment, so you may also update your destination device.
Here’s how to update Oculus Quest 2 in easy steps:
- Equip your headset and go to the Settings.
- Scroll the settings menu and go to “About.”
- Go to “Download, Install, or Install Update.”
In there, you will see the current version of the Meta Quest 2 firmware and whether there are any available upgrades.
If yes, it’s essential to apply them now, which may take up to 15 minutes, based on the internet and the performance of your headset.
Reminder: Also check for firmware updates on your destination device!
5. Factory Reset Your Oculus Quest 2
The Oculus Quest 2 casting live streaming error may be caused by a lasting system error on the VR headset, so you should consider the factory reset.
This method is irreversible, and all of the games, apps, and content on your unit will be permanently deleted unless you back them up.
How to Backup Oculus Quest 2?
To save your data from the mass deletion that comes with the reset, we recommend backing up your content by syncing your Quest with the cloud.
This is possible through the Quick Settings panel, where you must enter the “System” section to locate the “Backup” and “Cloud” options.
Here’s how to factory restore your Oculus Quest 2 in easy steps:
- First, locate the Power and Volume Down buttons.
- Press both buttons simultaneously for 15 seconds.
- Release the buttons when the boot menu appears.
- Use the Volume buttons to scroll down the menu.
- Hover over the “Factory Reset” option from the list.
- Use the Power button to select the highlighted tile.
When the factory reset begins, you must remain patient until your Oculus Quest 2 is fully reset and you’re prompted to set up the initialization.
This involves connecting your Oculus Quest to the internet and setting up all of the basic functionality options.
Reminder: Before attempting to cast, verify that your Oculus VR headset and destination device are connected to the same and accessible WiFi network.
6. Try to Cast on Another Enabled Unit
If you’re still encountering the “Casting Error” on your Oculus Quest, perhaps the issue is from the destination device and not your VR headset.
So, if you have an Android TV (MiraCast) or a Fire TV/Firestick, we recommend attempting to cast to any of those devices for justification.
This will suggest whether the problem is related to your Oculus Quest 2 or the casting issue is from the previous device you’ve been struggling with.
So, if your Oculus Quest 2 can cast on a different device, we recommend updating the previous unit or factory resetting its system!
Tip: Contact Meta Customer Service for additional help!
Hence, the casting error Oculus Quest 2 can be fixed by reconnecting both devices that are involved to the same and proven-to-work WiFi network.
Also, it’s recommended to update the headset’s firmware and perform a factory reset to revert all settings to default.
Follow us for more!
Kevin has over five years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.