Can you use Bluetooth headphones with Oculus Quest 2? Let’s find out.
Using Bluetooth headphones will certainly add to your immersive experience as they do not require being connected to your VR headset via wires.
It also provides you with better privacy compared to other options.
Yes, you can use Bluetooth headphones with your Oculus Quest 2. All you need to do is pair your headphones with the Quest 2, but remember that not all devices are compatible with your headset.
It’s time to go wireless!
Can You Use Bluetooth Headphones With Oculus Quest 2 – Detailed Guide
The Oculus Quest 2 is a standalone headset, which makes it perfect as an entry-level VR device. It comes with a 3.5mm jack for wired audio connections.
Initially, Bluetooth was an experimental feature, but Meta has made it official, allowing you to use wireless headphones.
Oculus Quest 2 Audio Options
The Oculus Quest 2 has two built-in speakers that are located on the sides of the headset.
They’re not bad and provide spatial audio that adapts to your head movements and VR environment.
They’re also loud enough for most users but might not give enough privacy in most cases.
Now, if using these speakers isn’t your thing, your Oculus Quest 2 also supports headphones.
Here, you have three options to choose from:
- 3.5mm headphones – Your Quest 2 has a 3.5mm audio jack that you can plug in any standard-issue wired headphones to give you a more private listening experience.
- USB-C headphones – There’s also a USB-C port on your VR headset to plug in a USB-C audio device.
- Bluetooth headphones – This is the most convenient selection as it does not require a wired connection to work.
We’re mainly concerned with Bluetooth headphones, so let’s see how you set them up to work with your Oculus Quest 2.
How to Pair Your Bluetooth Headphones to the Oculus Quest 2
If you want to know how to use Bluetooth headphones with Oculus Quest 2, now is the time.
You need to pair and connect them with your VR headset via the settings menu, so you’ll be able to use them.
To pair your Bluetooth headphones, follow these steps:
- Turn on your Bluetooth headphones and set them to pairing mode.
- Put on your Oculus Quest 2.
- Press the Oculus button on the right Touch controller.
- Go to Settings.
- Select Devices.
- Choose Bluetooth.
- Select the Pair option.
- Put your headphones in Pairing Mode.
- Choose your headphones from the list.
- If prompted, enter the pairing code for your Bluetooth headphones.
Note: Once your headphones are paired with your Quest 2, they will automatically connect whenever you turn them on and put on your headset.
Quest 2 Performance with Bluetooth Headphones
There are several downsides to using Bluetooth headphones with your Oculus Quest 2. The most noticeable and annoying one is the audio lag.
Now, this isn’t isolated to the Quest 2 VR headsets, as other devices can also suffer from this issue.
However, since Meta has not yet made the Quest 2’s Bluetooth audio support official, some problems plague it compared to other platforms.
We’ve looked at some apps where you’ll experience audio lag, and here’s a list that we compiled:
|Around 1 second of audio lag
|Noticeable audio lag and stuttering
|No audio issues
|No audio issues
|No audio issues
It does ruin the immersion, but you can minimize it by connecting a pair of Bluetooth headphones that are more compatible and use better codecs.
Note: For popular VR games, the audio does get out of sync from around 0.5 to 1.5 seconds.
How to Adjust Audio Settings for Optimum Performance
After pairing and connecting your Bluetooth headphones, your job’s not done yet.
Connecting is one thing, but using your headphones with your Quest 2 is entirely different.
You must adjust some audio settings to optimize the sound quality and performance.
Here are the steps on how to do this:
- Adjust the volume level on the right side of your Quest 2 headset.
- Enable low latency mode on your Bluetooth headphones before using them.
- Disable spatial audio on your Quest 2’s settings menu.
Note: You must find the optimum settings as soon as possible for a consistent audio experience every time.
With wireless Bluetooth headphones, you’re sacrificing some performance for convenience.
Understandably, you will notice several minor differences between your Quest 2’s speakers and wired headphones.
Here are some performance factors you need to consider when using wireless Bluetooth headphones:
- Using Bluetooth headphones with your Quest 2 will drain the battery faster.
- If you’re near many interference sources, it can cause issues like losing sync.
If you’re concerned about the performance of your Bluetooth headphones when paired with your VR headset, these are some of the more important ones to consider.
The audio quality that you will experience depends on your headphones.
If you’re using low-quality ones, the audio will sound muffled and distorted.
However, if you get a high-quality one, the audio will be clear, crisp, and immersive.
- Pick a high-quality wireless Bluetooth headphone for better sound.
- Look for headphones that support high-bitrate codecs like AAC, SBC, and LDAC.
Latency, on the other hand, is the delay between the time an audio signal is generated from your VR headset and the time it hits your ears.
If you’re looking for a highly immersive VR experience, it’s best to pick a low latency headphone.
High latency will cause the audio to sound delayed, distracting, or disorienting.
- Pick a low-latency Bluetooth headphone to reduce audio lag.
- Look for headphones that support low-latency codecs like aptX and LHDC.
Pro Tip: However, if you want to eliminate audio lag, it’s still best to stick to wired options.
Alternatives to Bluetooth Headphones
Since your Quest 2 comes with multiple input ports, it provides a few options for using different hardware.
In some cases, Bluetooth headphones will not cut it, depending on your needs, so you want to consider other options.
Here are some of the options you have:
- 3.5mm wired headphones: Connect to the audio jack on the left side of the headset.
- USB-C headphones: Connect to the port on the right side of the headset.
Note: In both these options, the quality of your headphones still determines audio quality, but these will eliminate audio lag.
Common Problems and Troubleshooting Tips
Whenever you’re connecting a different hardware to your Oculus Quest 2, it’s unavoidable that everything will go smoothly.
You’ll encounter problems that you must fix to have the best experience.
Here are some troubleshooting steps that will help you:
If you don’t hear any sound coming out from your headphones, you will want to look at these solutions:
- Go to Settings and ensure your headphones are paired and connected to your Quest 2.
- Check your headphones and turn them on.
- Charge them for 30 minutes to be sure they have enough battery.
- Check that your headphones and Quest 2 are not set to mute.
- Turn up the volume by pressing the Volume Up button on your headset.
- Verify that your in-game audio settings are not set to a low volume or mute.
- Restart your Quest 2 and headphones to refresh their connection.
Poor Sound Quality
If you’re using high-quality headphones and suddenly hear distorted or static sounds, you want to check for any connection or software problems.
Here’s what you need to do:
- Inspect your headphones for physical damage or defects.
- Keep other sources of interference away from your headphones.
- Disable spatial audio on your Oculus Quest 2.
- Unpair and pair your headphones with your Quest 2.
- Update the firmware of your Quest 2 and Bluetooth headphones.
If you continue to experience audio issues when using your wireless Bluetooth headphones on your Quest 2, consider contacting Meta Support for technical assistance.
Can you use Bluetooth headphones with the Oculus Quest 2? You can use wireless headphones now that Meta officially supports Bluetooth connections on their VR headsets.
However, ensure you use a high-quality compatible pair that supports low-latency modes.
Read our blog for more Oculus Quest 2 guides and troubleshooting tips!
Finn Wheatley holds a Master’s Degree in Computer Science from UCL, London. He helped small data science consultancy firms, helping large corporations to grow their data capabilities, deploy advanced machine learning-based analytics and troubleshoot tech-related issues. Check out more about him here.