belkin n300 wifi range extender orange light

When you see your Belkin n300 WiFi Range Extender orange light, it shows a connectivity issue.

The router may be unable to detect the internet connection, or the internet is not established correctly. Either way, you can’t get a wireless signal.

To resolve Belkin n300 WiFi Range Extender orange light issue, perform a reset. Power cycle the router and modem by unplugging them both for 20 seconds and plugging them again. Then, wait for the lights to stabilize. The orange light should be gone by now.   

An orange light usually indicates that there is no internet connection. In this situation, you won’t be able to surf the internet.

Before we discuss how to fix it, know the possible reasons first. 

Why my Belkin n300 WiFi Range Extender has Orange Light?

If you see orange light on your Belkin n300, there are definitely some problems with the router. There could be multiple reasons behind this.

The most common include:

1. No internet

The ethernet cable may not be properly connected, or the connections are not stable. A faulty cable can also cause the problem.

It can even be your ISP, so make sure to check on this before moving on to other troubleshooting steps.

2. Main Router not in Range

The WiFi extender is connected to a WiFi network but has a weak signal due to blockage or interruption in the WiFi signals.

Extenders like the n300 rely on your main router for its signal. Make sure it’s in range or has an excellent line of sight.

3. Outdated Firmware

An outdated firmware prohibits the Belkin n300 from performing efficiently and may lead to poor network coverage.

Router firmware is usually not on your to-do list of things to update. There’s a good chance it’s an older version that causes a few issues.

Once you understand why your Belkin n300 has an orange light, you can opt for methods to fix the issue.

How to Fix Belkin n300 WiFi Range Extender Orange Light

fix belkin n300 wifi range extender orange light

Now that you know the reason why your Belkin n300 has an orange light, it’s time to troubleshoot the problem.

You can start with the simplest yet effective method and work your way through other ways to fix the issue.

Solution #1: Restart the Belkin n300

The simplest way to fix your Belkin n300 orange light issue is by restarting your device.

  1. Turn off and unplug the WiFi extender for 20 seconds.
  2. Plug it again.
  3. Turn it on and wait for 1 minute.
Note: While you do this, you can also restart your router.

Solution #2: Restart your Router

After turning off and unplugging your WiFi extender, restart the router to clean out its short-term memory and keep it running smoothly.

  1. Power off the modem.
  2. Wait for 10 seconds and plug it back in.
  3. Unplug the power cable from the router and wait 10 seconds to plug it back in.
  4. Turn on your modem and router.
  5. Wait for 1 minute before connecting.
Note: You should see blue light or yellow light. If you see a yellow light, it means the WiFi extender is connected to the network, but the signal is weak.

When this happens, move the Belkin n300 closer to your router.

Solution #3: Move the Belkin n300 Closer to your Router

Do some troubleshooting to quickly get to the source of the problem and get your Belkin n300 up and running.

  1. Move your device closer to your router or vice versa.
  2. Move your router to an elevated position.

You may be on the verge of where your device can receive a signal from your wireless router. If the router is on the ground, it means the signal has to pass through many obstacles.

Solution #4: Remove Obstructions Between Your Router and the n300

Remove as many objects as possible between your Bilken n300 and wireless router. The signal may be weak because it hits many objects, including walls and cabinets.

  1. Place your router in an area with a line of sight.
  2. Move the Belkin extender away from other devices that might disrupt the signals.
Note: Make sure there are no obstructions that can hinder the signal from connecting with your device.

Signals from your baby monitor, cordless phones, cellphones, and other wireless devices can interfere with your router’s capability to send signals properly and your device’s ability to receive them.

Solution #5: Reset the Belkin n300

orange light on belkin n300 wifi range extender

The surest way to fix the Belkin n300 orange light issue is resetting the router. The reset begins once you hold the reset button while the range extender is powered ON.

  1. Hold the reset button using a pin, nail, or other pointed objects until you see blue light.
  2. Connect directly to the new WiFi SSID named Belkin.setup.
  3. Open your browser and visit belkin.range
  4. When you are ready, press Start and enter the necessary connection details.
  5. Configure the extender with your chosen WiFi name and password.

Once changes are made, disconnect from the Belkin.setup SSID and connect to your WiFi.

Note: Your PC, smartphone, laptop, and other devices will connect automatically to the Belkin n300 if the signal from your WiFi is poor.

Solution #6: Update the Firmware

Before updating the firmware, you should consider backing up the router’s settings. Instead of manually setting up your Belkin from scratch, you can use the backup file for all previous configurations.

To manually update your Belkin n300, start by checking your router’s model and version number.

Then, download the updated firmware file from the Belkin support site. Finally, perform the update through the router’s web interface or Belkin dashboard.

Updating through the Belkin Dashboard:

  1. Launch your web browser and go to the Belkin support page to download the latest firmware.
  2. Enter the model number of your device and press Enter.
  3. Choose your device from the Product Results and download the firmware that matches your hardware version.
  4. Once the download is complete, click Dashboard, scroll down and click Advanced Settings > Utilities, then select Firmware Update.
  5. Choose your downloaded file, click Open, then Update.

Updating through a web browser:

  1. Launch your web browser, enter 192.168.2.1 in the Address bar, then press Enter.
  2. Enter your router’s password (if applicable), and then click Submit.
  3. Click Firmware Update from the Utilities section.
  4. Click Browse, then find and select your download file, and click Update.
Note: Don’t turn off or reboot the router at the end of the update.

Wait for the router to complete the update. Make sure it is uninterrupted to ensure it will run smoothly. When the update is completed, check the light of your router before using it.

Hence, if your Belkin n300 WiFi Range Extender is blinking orange light, resetting the device is an effective workaround, especially if all troubleshooting methods do not work as expected. However, this means all settings and configurations will be deleted.

So, you may need to set up the router again.

Read Next: How To Portforward On A Belkin Router?

Last Thoughts

If your Belkin n300 WiFi Range Extender orange light is on, you will find the possible causes and solutions in this post to help you resolve the issue.

However, if you still face issues after performing the above methods, you may reach out to the Belkin technical support team for additional assistance.

If you find this post helpful and have other difficulties with another device, you may find answers in our blog.